press eccentric used for sale

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL

used baler Manufacturer: PAAL Type: LIKON 110/150 Year of construction: May 2004 Specifications: Press weight up to: approx. 36 tons Press force at 275 bar: 150 t Operating pressure max. 320 bar Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 2 x 75 kW Flow rate: 425 m³/h Binding: 5-fold horizontal Total connected load: 176 kW Rated current: 340 A Pre-fuse (min.) 400 A Operating voltage: 3 x 400 VAC/50 Hz/N/PE Control voltage: 230 VAC / 24 VDC including: - Oil cooling - Low-pressure circuit - Free kicks - Key locking system Transport dimensions: Length: 13,803 mm Width: 2,500 mm Height: 3,164 mm without wire unwinding devices, without binding wire, without feed belt, without a personal protection system, without conveyor belt hopper and withou ...

CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Good day We hereby offer you a used baler from the manufacturer Strautmann, type BaleTainer. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Strautmann Type BaleTainer Year of construction 2013 Operating hours 18,819 hours Number of bales pressed: 7,019 pieces Press force main press 60 t Drive power 9.2 kW Machine weight press 7.38 t The press has been partially overhauled. Piston rods and gasket sets of the two main hydraulic cylinders were renewed and general maintenance work such as oil and filter changes etc. was carried out. Finally, after the overhaul work, the machine was tested. For feeding, the press has a hydraulic tilting device to empty lattice box containers at a truck ramp. For example, the machine can be par ...

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer, a high-pressure pump and drip plates Condition: Used Price: On request

The press is for the re-pressing of bacon. This gives it a smooth surface Compressed air connection 8 bar

The BTS-MF150 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 150 kg. The baling press impresses with its ease of use, safe operation and its large filling volume, it is ideal for medium material volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 8 Ton Bale weight: up to 150 kg (material depending) Bale size: 1000 H (var.) x 975 W x 800 D mm Machine size: 2630 H x 1560 W x 1030 D mm Machine weight: 780 kg Transport height: 1955 mm Loading aperture: 975 W x 470 H mm Cycle times: 40 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale kicker for easy eject the bal ...

Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.

The BTS-MF250 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 250 kg. With a crush insert baler is even suitable for crushing individual small and large drums and also other sheet metal containers. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 15 Ton Bale weight: up to 250 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 2900 H x 1759 W x 1185 D mm Machine weight: 985 kg Transport height: 2250 mm Loading aperture: 1200 W x 680 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phas ...

Number of punch stations 35 , output tablets 210,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-100 rpm .

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

The scope of delivery includes: 01x Surface-mounted shelf rack, used Material colour: hot-dip galvanised Total depth: approx. 2,520 mm (lifting rod direction) for double rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Overall width: approx. 1,120 mm (crossbar direction) Bearing rod diameter: 30|1.50 mm Frame height: approx. 30 mm Mesh size: approx. 68 x 45 mm Weight | Pcs.: approx. 30,83 Kg Internal designation: GR-114 Note: The grating may have damage, scratches, dents, welds. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Rotative tablet press of 27 stations Max. diameter of the tablet 16 mm Filling depth 18 mm Pressing capacity 80 Kn Prepressing capacity 20 Kn Production from 48.000 to 100.000 h Dimensions : 1.000 x 950 x 1876 . Weigh 1850 Kg. Force feeder Type of tool : B

consisting of: Filler Cimec America with 24 filling valves, with double pre-evacuation Crowner Arol Esse with 4 closing heads

automatic baler Manufacturer: HSM Type: VK 8818 R-FU, 100 t Year of manufacture / delivery date: 12/2012 Operating hours: approx. 13,500 specifications: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg including: - Remote maintenance system - Wire Slot Maze - Press box double-walled with replaceable HARDOX 500 sh ...

Number of punch stations 55 , output tablets 594,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-90 rpm . Dimensions of the machine : 1490 x 1230 x 2100 , weight approx. 3750 Kg

consisting of: 12-head rinser 12-head long-tube beer filler 4-head crown corker capacity: 2200 bph

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

Manufacturer: Friz, Year: 1997, Type: MFP 22/14/11, Press length mm: 1100, Pressing width mm: 800, Work piece thickness max mm: 95, Year :1997

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Tablet press Fette P2000 Tablet output: 250.700/h mechanical speed Number of station: 43 stations Tablet diameter max: 13 mm Compression force max: 80 kN Initial compression force: 20 kN Type of tool : EU Norm BB Height of the machine with filling hopper : 1950 mm Project floor area : 1212 x 1126 Weight: 2200 Kg Year of manufacture :1993

The picture shows the blower before the overhaul. All our blowers are sold with new bearings and sealing elements. Blower data: 2.04 m2/min 400mbar 2.3 kW

Manufacturer: Homburg, Type: Korpusspresse, Year: ca.1980, Work piece width min-max mm: 250-600, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 400-1500, Hydraulical/pneumatical: Pneumatisch, Cylinder vertical: 4, Cylinder horizontally: 2, Machine rigging: hand, Year :ca.1980

Tablet output: 234.000/h (mechanical speed) Number of station: 37 stations Tablet diameter max: 25 mm Filling depth : 21 mm Die plate speed : 25 – 100 RPM Compression force max: 100 kN Initial compression force: 10 kN Type of tool : EU Norm D Height of the machine with filling hopper: 2135 mm Project floor area: 1260 x 1280 Weight: 2840 Kg

McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!

N° of Stations 35 Output tablets per hour 70.000 - 210.000 Maximum tablet diameter 16 mm Maximum depth of fill 8.5 mm Upper punch entry 1.5 - 8 mm Die type B tooling Die diameter 30.1 mm Die height 22.22 mm Upper/lower punch length 133 mm Punch body diameter 19.05 mm Compression force 80 kN Power 3.75 kW Net weight 1143 Kg Can be also for doble layer.

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

Rotary Press 23 Stations upgraded with a new rejection system C50 V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept IPT Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

Manufacturer: Italpress, Type: Program 30, Working widht max mm: 3000, Working width min min mm: 1800, Hydraulical/pneumatical: hydraulisch 3 PS, Wight approx. kg: 1800,

Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990

Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,

Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997

Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...

A generally overhauled rotary piston blower brand is offered: Aerzener machine factory type: GMA 12.4 See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you have any questions, please call.

Aerzener

mechanical briquette press briquetting press chip press defective SPÄNEX Type: KS7 Total motor power 13.2 KW Pressing capacity up to approx. 300 kg/h Briquette diameter approx. 50 mm The machine has been in my warehouse for several years. In the briquette press, the brass bearing of the crankshaft is worn. The bearing bushes would have to be replaced. The control system would have to be checked. It is sold as it is, because I clean up my stock. Documents on the machine are available. Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading op ...

The blower is installed in a soundproofing hood with basic frame, safety valve, recop flap and attachments. The drive engine can be designed according to customer specifications. The compressor stage is completely outdated. You can also only purchase the GM 10 S level. If you have any questions, please call.

Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...

New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...

Agitator 0.25 KW with aluminium propeller 300 mm With traverse made of aluminium profiles 45 45 mm. Used electric motor 0.25 KW, 3 x 230/400 Volt, n = 1375 rpm, Weight approx. 15 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid coupling made of stainless steel 1.4571. Stirring organ: Two-wing aluminum propeller d = 300 mm.

New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.

Supply system for sliding ring seals / pressure tank 12L Manufacturer: Fluiten Material: Stainless steel (1.4301) Built: 2000 Volume: 12 L Pressure (max): 16 bar Temperature (max): 99 °C Height: 430 mm (without gauge) Diameter: 219 mm incl. thermometer, gauge and sight glass Condition: new and unused Connections: see drawing Item can be inspected at any time in 76694 Forest by arrangement.

Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emerge ...

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)