133,685 used machines on RESALE, but how to find them? Machine Search
Key data: 100 t, 355 mm, 125 mm
Press force 100 t The dimensions of the table top 1000 x 640 mm Stroke adjustment 125 mm Plunger adjustment 90 mm Stroke rate 75-150 rpm Main motor power 6/10 kW Machine dimensions L x W x H 1725 x 2230 x 2970 mm Machine weight 10100 kg
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 8 t throat: 115 mm stroke: 8-56 mm ram - range of adjustment: 30 mm table surface area: 390x230 mm ram surface: 155x125 mm hole in the table: 105x75 mm table height: 820 mm tool hole in ram: 35 mm weight of the machine ca.: 800 kg dimensions of the machine ca.: 1000x1000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 16 t throat: 185 mm stroke: 8-60 mm no. of strokes: 140 Hub/min ram - range of adjustment: 50 mm table surface area: 500x340 mm ram surface: 230x155 mm hole in the table: Ø160 mm table height: 800 mm hole in the table: Ø35 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200x1200x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 440 mm stroke: 8-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 63 mm table surface area: 720x750 mm ram surface: 440x280 mm hole in the table: Ø 240 mm table height: 830 mm tool hole in ram: Ø 40 mm weight of the machine ca.: ca. 5,0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 65 t throat: 370 mm stroke: 29-151 mm no. of strokes: 50 Hub/min ram - range of adjustment: 80 mm table surface area: 1300x700 mm ram surface: 1000x600 mm hole in the table: ¦ 110 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1700x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 270 mm stroke: 4-100 mm no. of strokes: 130 Hub/min ram - range of adjustment: 80 mm table surface area: 670x540 mm ram surface: 460x300 mm hole in the table: Ø 100 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1500x2300x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 340 mm stroke: 8-140 mm no. of strokes: 50 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x700 mm ram surface: 650x450 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: BxTxH 2300x1600x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 t throat: 155 mm stroke: 6-60 mm no. of strokes: 84-210 Hub/min ram - range of adjustment: 50 mm : 300 mm table surface area: 300x450 mm table height: 840 mm hole in the table: Ø 90 mm ram surface: 190x278 mm tool hole in ram: Ø 25 mm total power requirement: 1,5 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: BxTxH 1100x1100x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 85 Hub/min ram - range of adjustment: 60 mm table surface area: 820x530 mm ram surface: 260x210 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 415 mm stroke: 8-140 mm no. of strokes: 48 Hub/min ram - range of adjustment: 80 mm table surface area: 920x670 mm ram surface: 700x450 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 1500x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 330 mm stroke: 10-130 mm no. of strokes: 56 Hub/min ram - range of adjustment: 80 mm table surface area: 830x600 mm ram surface: 250x130 mm table height: 870 mm tool hole in ram: 50 mm weight of the machine ca.: 11 t dimensions of the machine ca.: BxTxH 2100x1900x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 t throat: 310 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x610 mm ram surface: 600x175 mm hole in the table: Ø 170 mm table height: 820 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 620x500 mm ram surface: 310x260 mm hole in the table: Ø 250 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1200x1900x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 400 t, 160 mm
Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.
Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T
Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg
Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton
Key data: 80 t, 400 mm, 112 mm
Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg
Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination
Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton
Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg
Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton
Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton
nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm
pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
