press container used for sale

Technical data: -Total load powered + revolving unit 60000 kg -Load container device 30000 kg -Workpiece diameter 500-4000 mm -Mot Center distance of the support roles. adjustable - diameter 500 mm -Roll width 470 mm -infinitely variable rotary speed 100-1500 mm / min -Torque 5132 NM -Hand-held remote controls for re - and p-drive run - 400 V -Both units are mounted on Rails and -can be moved manually parallel -Space angetr. Unit approx. B H 2800 x 1200 X 1600 mm -Motoryacht. with ongoing unit approx. B H 2800 x 1200 X 1200 mm -Weight angetr. Unit approx. 4800 kg - approximate weight with running unit 3800 kg

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Steel tank, used approx. 100 m³ / 100,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 100 m³ / 100,000 litres material: steel tank dimensions: approx. Ø 2.9 m x 15.8 m long weight: approx. 17.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possib ...

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

2 with each ca 1000 l  

Stainless steel tanks on 4 feet, 20 m3, isolated, rubberized inside, agitator

P80 - used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, aboveground, vertical, on four bases, in good condition, newly painted. capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP height tank: approx. 2.30 m overall height: approx. 2.50 m diameter: approx. 1.66 m Vertically standing, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has alre ...

Volume: 4000 ltr. Material: V4A --> 2 identical containers in stock.

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Sample images - sightseeing by appointment possible. Check our other offers.

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Sample images - sightseeing by appointment possible. Check our other offers.

Sanitary container, m/w, 10 feet (3m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.

Storage container "Moverbox," 5 feet (1.5m) We rent and sell storage containers, sea containers, construction containers, overseas containers, office container dupplants. Offer with transport possible-ask us. Sample pictures-viewing by appointment possible. Please also note our other offers.

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

20,000 liters tank with thermal insulation not used tanks

Bohle HS400 lifting and turning device for containers, suitable for use with feeding tablet presses, capsule fillers etc. Up to 400kg lifting capacity

CONTAINER ANLAGE 90 m2 plant, 6x 20 FT OfficeContainer Building / Office / Living Room, residential container workshop container container plant BJ 2005 - 6x 20 foot container (2.47 m wide, 6.00 m long, 2.90 m high) exterior size - 2.50 m high inner dimension - Residential container office container construction site container, container plant - complete price 6 pieces, excluding assembly - easy assembly - Construction Year 2005

Shrinking tank /Mobile Dip Tank / INAUEN VC 999 tank 62.41 i Manufacturer: Inauen VC 999 Type: 62.41 i Connection: 400 volts, 50 Hz Chamber size: 600 x 400 mm Request an offer Sinter-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition

Automatic washer for cleaning, disinfecting and drying. The washing machine comes with conveyor, which transported the container (in rinse baskets) and discharges from the sterile area. Suitable for containers of 5-1000 ml.

Insulating container 600400 . Batteries available

Special offer: approx. 10.000 pieces Euro rotary stacking container, 600 x 400 x 300mm, grey and blue - used - : Price per piece ex location: only 4 € (net), minimum order 6 pallets (approx. 360 pieces). Price per piece ex truck acceptance (approx. 3.960 pieces) 3.-€ (net) Price for complete order: 2,50.-€ (net) / piece! Rotary stacking containers can be inserted into each other when empty. This can save up to 70% space. These containers can be stacked on top of each other by rotation – even without a lid. If they are rotated 180 degrees again, they are nestable. Manufacturer: unknown, could be Schoeller Allibert Type: unknown Year of construction: unknown, probably 2005 Dimensions: 59.5 cm L x 40 cm W x 32 cm H The following information is subject to change: Outdoor 600 x 400 x 300 Inside. 460 x 340 x 270 Stack height 285 Nesting ratio 72% Wit ...

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Process containers new Manufacturer Becomix Type MV 250 Year built in 2015 never in use Content Usable volume 250 l Vacuum and pressure-resistant -1/+2 bar Operating temperature 20-134 °C Heating room Pressure-resistant 0-4 bar Operating temperature 20-152 °C

Two stainless steel tanks with drain. About 1500 l individual was sold

Batch container 1.500L, heatable, incl. anchor agitator

Mixing vessel Total volume: 100 l speed-controlled agitator Speed 335-1920 rpm Engine 3000 rpm Lid outlet on the ground very high quality Dimensions LWH: 500 x 500 x 1800 mm Weight: approx. 150 kg

Mixing container 150 l Filling lid (diameter 200 mm) Propeller mixer 2.2 kW stable design Outlet with valve (milk pipe) Level detector high-quality workmanship (stainless steel V4A) Dimensions LWH: 700 x 700 x 1850 mm Weight: approx. 170 kg

Mixing container 150 l with opening lid various lid openings with valve Exhaust fitting with milk tube valve Propeller agitator Speed: 1380/224 Power: 0.55 kW Dimensions LWH: 800 x 800 x 1800 mm Weight: approx. 150 kg

Aflösebehälter Zettelmeier -Content 250 litres -Built in 2012 -Power 12 kW -Stainless steel -with drain tap

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set) with polyurethane coated steel rollers, infinitely adjustable rotation speed, high frequency protected, right and left run, the largest load capacity of the two units together 10,000 kg, Workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.18 kW, drive rollers made of steel dia. 250 x 160 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit together) approx. 270 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler rollers), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run, maximum load capacity of the two units together 14,000 kg, Workpiece diameter 600 mm to 5,500 mm, drive power 2 x 0.55 kW, steel drive rollers of 400 x 100 mm, rotation speed 120 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit approx. 870 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run Largest load capacity of the two units together 5,000 kg, workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.37 kW, drive rollers made of steel of 250 x 80 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see figures, weight of the set (driven and non-driven unit together) approx. 230 kg

This is a granulate dishwasher from the manufacturer Wexiödisk, type WD-100GR from the year of construction 2016. Wexiödisk granulate pot dishwashers clean all stainless steel kitchen utensils with water added to plastic grains. Even burnt-in grease can be removed quickly and easily. The dishes do not need to be soaked or scrubbed; only loose food residues are scraped off to avoid unnecessary contamination of the rinsing water. Thanks to the unique, double-door push-through system, the WD100GR differs from all other pot washers on the market; The dirt and clean sides are completely separated from each other. The scope of delivery includes the inlet table, the cassette trolley and two cassettes. The inlet table is equipped with a water faucet and a hose holder, so that a hand shower can be installed quickly and easily for pre-rinsing. The dishwasher has undergone a major predictive insp ...

Schneider & Co. mobile stainless steel vessel, total volume approx. 200 litre, vessel height approx. 1000 mm, vessel diameter approx. 740 mm, bottom outlet, fitted on transport frame with wheels.

Hermann Waldner stainless steel mobile vessel, jacketed for heating/cooling, total internal volume 60 litre, total jacket volume 20 litre, permitted internal vessel operating temperature max.150ºC, permitted jacket operating temperature max. 150ºC, permitted operating pressure inside max. 0 bar, permitted operating pressure in jacket max. 3 bar, bottom outlet, mobile on wheels, vessel height approx. 1000 mm, vessel outer diameter approx. 650 mm, vessel inner diameter approx. 500 mm

Double door pharma grade washer incl. conrol panel Siemens, type Simatic 087. Washer is CE-marked.

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

Used oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Own weight: 30 kg

Storage tank 1,700 liters Standing from V2A dimensions: Ges.Height: 3600 mm Cyl.Height: 3200 mm Diameter: 850 mm material: V2A – AISI 304, 1.4301 surface: Marbled outside cylinder: With threaded nozzles in the middle top DN100 With ladder hook With manhole 400 x 300 mm With threaded nozzle DN65 With residual drain DN80 subsoil: Also stands steel construction with 4 feet

weight max.: 40 t workpiece diameter: 7000 mm roll diameter - bore: 500 mm Wheel width: 180 mm Distance of shafts: 100-3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 6000 mm gear diameter: 680 mm gear width: 230 mm Distance of shafts: 900-3500 mm axis height: 550 mm total power requirement: kW weight of the machine ca.: 4,5 (9 ) t dimensions of the machine ca.: m Load capacity per piece 30 t load-carrying along 60 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.