126,719 used machines on RESALE, but how to find them? Machine Search
Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985
Key data: 1 t
Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg
Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.
Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Key data: 18 t
Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
200 ton x 4000mm with Rolleri Pneumatic clamps
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
Press brake manufactured in 2005. This Baykal APH 3110x200 features a bending length of 3100 mm and a capacity of 200 tons. It is equipped with a main motor of 15 kW and has a maximum stroke of 250 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APH 3110x200 machine we have for sale. Contact us for further details.
HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000
Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details.
SMERAL TRNAVA LEN 63C eccentric press was built in 1988 in Czechoslovakia by Šmeral Trnava. It is an extremely reliable machine designed for cold metal forming. It is capable of performing operations such as precise punching, stamping and bending of workpieces. The high press force of 63 tonnes, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 45 and 140 strokes per minute and its stroke is adjustable in the range from 10 mm to 105 mm. With its very rigid C-shaped design, the SMERAL TRNAVA LEN 63C also provides excellent stability during even the most intense challenges. All this makes the offered press an excellent choice for the production of parts with high repeatability and excellent precision. The LEN 63 C eccentric press weighs 5850 kg. Technical specifications of the SMERAL TRNAVA LEN 63C press - maximum press force: 63 t (6 ...
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
Key data: 15 t, 66 mm
Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Used multi-layer paver Zenit 844 Built in 1993 inclusive: 1 piece concrete mixer 750 l Teka 1 piece concrete mixer 500 l approx. 12 pieces of used moulds approx. 100 production pallets Used concrete multilayer machine Manufacturer: Zenith Type: 844 Year: 1993 including: - 1 pcs 750 liter mixer Teka - 1 pcs 500 liter blender - about 12 moulds - about 100 pcs production boards
Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional
maximum number of results exceeded
please refine your search
50 € 
