press container used for sale

Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground for various purposes Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

volumn: . diameter: . mm tube connection: . 0 Dimension: 500x315x200 0 20 pieces The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Filteranlage, Filter system - positive pressure: yes, Filter hoses: 42, Hose diameter in mm!: 180, Length of filter tubes: ca 1500, Electronic control board: yes, Number of fans: no, Collecting tank quantity: 5, Suction pipe diameter 1 mm: 180, FREE TEXT: mit Abrüttelung,

Manufacturer: Rippert, Filter system - positive pressure: yes, Volume flow rate m³/h: ca. 7.500, Number of filter filter gallerys: 2, Required space L x W x H mm: 4.800 x 1.800 x 4.700,

Manufacturer: Silo, Year: 2006, Capacity m³: ca. 250, Length mm x width mm x height mm: 7800x6582, Year :2006

Liquid reservoir EFD Nordsen 615DT (presumably) - for liquids of different viscosities - uniform liquid pressure - prevents contamination and evaporation 1 liter max. 6.9 bar Dimensions: 260 x 190 x 190 mm

Container turning device, roller block PAGUS load capacity: approx. 10 t per trestle 3 pieces wheel diameter Ø 320 mm without drive ! weight: 3 x 950 kg Dimensions: 3 x 2020 x 870 x 1100 mm

: 3 : 900 mm centre distance: 2x 4mm mm Distance between centres: 1x 5 mm mm capacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Standing steel tank with inner coating Suitable for; Extinguishing water or rainwater Volume: 70,000 L Dimensions: Ø 3.00 × 11 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³ Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Industrial Processing Tank – 19,517 L Working Capacity (2006) High-capacity industrial processing and storage tank designed for hygienic handling of liquid food products in beverage and dairy processing environments. The tank offers robust construction, high temperature tolerance, and pressure capability suitable for modern production lines. General Information - Year of Manufacture: 2006 - Condition: Used, operated only for a short period Capacity - Working Capacity: 19,517 liters Technical Specifications - Maximum Pressure: 4.0 bar - Maximum Temperature: 145 °C Dimensions - Outside Diameter: 2,570 mm - Total Height: 6,830 mm Key Advantages - Large 19,517 liter working capacity - Suitable for high-temperature processing applications - Designed for pressure-resistant operation up to 4.0 bar - Ideal for dairy, beverage, and liquid food processing - Robust  ...

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

Vertical GRP tanks, polyester tanks with flat bottom with slope Volume: 50,000 L Dimensions: Ø 3.00 m × 7.25 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

weight max.: 100 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 450 x 180 mm feed: 100 - 1000 mm/min total power requirement: 5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 150 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 300 mm feed: 100 - 1000 mm/min total power requirement: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kg workpiece diameter: 20-800 mm connected load frequency: 230 V speed: 100 - 1000 mm/min total power requirement: 0,1 kW weight of the machine ca.: 65 kg dimensions of the machine ca.: 520x470x390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg workpiece diameter: 20 - 1500 mm drum diameter: 100 x 200 mm connected load frequency: 230 V total power requirement: 0,12 kW dimensions: 0,8 x 0,37 x 0,36 m speed: 100 - 1000 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 t workpiece diameter: 750 - 5000 mm drum diameter: 480 x 180 mm feed: 100 - 1000 mm/min total power requirement: 2 x 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 600 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 t workpiece diameter: 500 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 1,5 kW weight of the machine ca.: ca. 1,8 t Dimensions (LxWxH): 2,2 x 2,7 x 0,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t workpiece diameter: 250 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 t workpiece diameter: 850 - 5500 mm drum diameter: 450 x 240 mm feed: 100 - 1000 mm/min total power requirement: 2 x 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 t workpiece diameter: 320 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2,2 t workpiece diameter: 101 - 1524 mm feed speeds infinitely variable: 0 - 3600 mm/min gear diameter: 254 mm gear width: 76 mm total power requirement: 0,5 kW weight of the machine ca.: 0,245 t dimensions of the machine ca.: 1,02 x 0,82 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute) | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine phot ...

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine photo shows an open machine without protective covers and safety doors for a bet ...

Capping Module to screw caps onto containers. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 160 cycles/minute | cap diameter: 15-70mm | container/bottle diameter: 35-140mm | container/bottle height: 50-300mm | 220V, 2.7kW | machine dimensions: L2800xW900xH1880mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. Two containers can be capping per cycle and ensures a higher output per min due to the two screwing device heads. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | conveyor belt speed: 13m/minute | cap diameter: customized | power: 220V, 3.5kW | compressed air: 3-5bar, 0.1m? | materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic | machine dimensions and weight: L1450xW850x ...

Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 25 cycles/minute | conveyor belt speed : 0-13m/min | cap diameter: customized | power: 220V, 3.5kW | compressed air: 3-5bar, 0.1m? | materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic | machine dimensions and weight: L1450xW850xH1600mm, 350kg | Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized ...

Capping Module to press caps onto containers. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 15-100mm | container/bottle diameter: 35-140mm | container/bottle height: 50-300mm | 220V, 2.7kW | machine dimensions: L2800xW900xH1880mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | 380V, 2.0kW | Machine dimensions: L1600xW800xH1160mm | weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible.