press container used for sale

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Equipment: Overpressure,Manufacturer: W. Ortmann,Condition: used,Volume: 6,000,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,580,Cylindrical length: 2500,Total height: 1,900,Total length: 3,500,Wall thickness floors: 5,Wall thickness cylinder: 5,Technical documents: Drawing, Acceptance certificate,Type plate: Yes,Outlet: DN40 DIN 11851,Note: slight adhesions,Remarks: 1 oval manhole (approx. 420 x 320mm) in the front floor Information in the drawing different loose fittings in the tanks were not correct for the cylinder length (were not correctly installed when the

Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

For sale is an 800 to step press. Technical data see photos. Press we sell from location.

Press has made about 2,7 million peaces so far, and large factories make over 10 million pieces with these machines. The maximum theoretical diameter of the pieces is 380 mm, production-wise max. 320 - 340 mmfinished size. Depth 110 mmfinished measurement . Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 - 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has degreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks.

Quick-release clamping device, pneumatic clamping device, clamping device, air clamping pump, high-pressure air clamping pump, ultra-high-pressure air clamping pump, hydraulic pump -Manufacturer: Tentec, High-pressure air-operated hydraulic pump with transport trolley -Pump: HII Type 5L-SS-300 -Outlet pressure: max. 2275 bar / 33000 psi -Individual components: see photos -Dimensions: 890/490/H1220 mm -Weight: 66 kg

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

Used heavy-duty heated press for woodworking applications, suitable for gluing, veneering and pressing of wood and wood-based panels. Robust industrial construction with heated platens for even distribution of temperature and pressure. Ideal for professional joinery workshops and furniture production. Features: - Heated operation - Useful working size: 3000 x 1300 mm - Heavy-duty construction - Suitable for woodworking applications - Used - fully operational Brand, press force, number of cylinders, electrical connection and further technical specifications are not confirmed for this specific unit - please contact us for details. Used, fully operational Auction-ID: A7-50988-33

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

Used woodworking frame press with 5 frames and 5 clamping screws. Used for gluing and pressing wooden parts during the manufacture of frames and cases, ensuring stable and even bonding of the corners while the glue dries. Ideal for joinery workshops and for the production of window frames and doors. Brand, exact model and further technical specifications (dimensions, weight) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-34

Used press / assembly machine for woodworking, suitable for assembling and pressing wooden windows, frames, skeletons, panels and glued wood parts. Suitable for joinery workshops and furniture or window production. Brand, exact model and technical specifications (press force, working dimensions, electrical connection, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-36

Specifications: - Brand/series: EURO Series - Type: HL 215-25 - Product type: mobile air compressor - Year of construction: 2003 - Serial number / lot number: 759609 - Code: 6RCC304BB - CE marking - Electrically powered - Horizontal pressure vessel Features: - Compressor unit - Electric motor - Compressed air receiver / pressure vessel - Pressure switch - Pressure regulator - 2 pressure gauges - Compressed air connection with quick coupling - Control valve - Pressurization/safety device - Electrical power cable - Handle - 2 transport wheels - Support leg Condition: - Used condition - Signs of use and local superficial corrosion visible - Seen working on admission - See photos and video for a further impression of the execution and condition Auction-ID: A1-47452-430

This lot belongs to ANDRITZ's industrial ATMP-250 (Advanced Thermo-Mechanical Pulp) plant, which was acquired as part of a project from 2018/2019. The plant was designed for the production of mechanical pulp. Auction-ID: A1-51939-637

Manufacturer: Robert Bürkle Machine Type: Hydraulic Plate/Veneer Press Suitable for pressing veneers and wood-based materials Large-format press plates Solid industrial design Used condition Type, year of manufacture and technical data currently not readable Functional condition not checked Sale in existing condition Auction-ID: A1-51205-8023

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

Tank container 26,000 L tank and apparatus construction Manufacturer: Tank und Apparatebau Neesen Segler GmbH&Co.KG Built: 1993 Room capacity: 26,000 L Danger Class: AIII Inside rubberized, monitored Condition: good

Used and new sea / maritime / transport containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 4 ...

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 45ft (13.7m) High Cube - 20ft (6m) office container - 20ft (6m) sanitary container Special Special versions such as Double Door, Flat or Open Top are always available at short notice. VISIT US Sightseeing is possible at any time and at short notice at our depot in DE-83395 Freilassing. For this we ask for a short telephone arrangement. KNOWLEDGE ABOUT SEECONTAINER Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 20mm waterproof plywood panels made  ...

Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Steel tank, used approx. 30 m³ / 30,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 30 m³ / 30,000 litres material: steel tank dimensions: approx. Ø 2.0 m x 10.0 m long weight: approx. 6.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible to ...

Steel tank, used approx. 50 m³ / 50,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 50 m³ / 50,000 litres material: steel tank dimensions: approx. Ø 2.5 m x 10.5 m long weight: approx. 10.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible t ...

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

P92 - used approx. 7 m³ / 7,000 litres polyester tank, GRP tank, Juno tank, standing on 4 cones, in good condition. technical details: capacity: approx. 7 m³ / 7,000 L material: polyester tank / GRP tank manufacturer: Juno dimensions: w 1.50 m x l 2.00 m / h total 3.50 m including feet Manufacturer Juno, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it m ...

Used compressed air container storage facility, in top condition Compressed air system fully installed in a 20 ft steel container, 2 x Boge VLEX screw compressors with 65 KW (overhauled a year ago, new screw elements, engines newly stored, new shooter and completely new compressor control, with overarching control. Delivery quantity at maximum maximum maximum press 10 bar 2 x 9 m ³/min, free to control with 2 x 9 m ³ or together 18 m ³/min. In addition, in the container is a built-in container with 500 lite, a cyclone separator, Beko cold dryer type. RA, and compressed air filter 2 fold, Mirco filter and activated carbon filter, condensate treatment is done via an oil water separator. The too and exhaust air are discharged via ventilation ducts, and can be sealed with electrically motor locking flaps. Container includes 4 electric heaters (thermostat controlled), and an electric sub ...

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

20ft (6m) Standard Box Container 8'6", first trip (new) manufactured according to ISO 1496-1, made of weather-resistant Corten steel, planked inside with 28mm waterproof hardwood floor, with CSC approval (5 years validity) ALSPCONTAINER® PRIME SERVICE & QUALITY In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. LOOK FOR YOUR CONTAINER US! PrimeQUALITY As a very special service, we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State As good as new / First trip â with slight traces of usage due to a one-off sea voyage Color Gentian blue RAL 5010 or subject to availability TECHNICAL DATA - Dimensions on ...

Thermokuli,

Storage tank containers tank containers (diesel, canola oil) for heat and power generation Built in 2006 24,000 L capacity with agitator Manufacturer: Krampitz tank systems TÜV Hannover / Sachsen Anhalt

used approx. 2.5 m³ / 2,500 litres polyester tank / GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 2.25 m; Ø = 1.30 m; H = 1.55 m (including bases) Aboveground, tank, incl. 2 steel bases, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks ...

Operating temperature: 90 °C Material: stainless steel 316 L, mirror-polished (easy to clean) Operating pressure: 5 bar Code. No. 27512 12 Ser. No. 92013791A The filter is designed for the otimal filteration of solutions in pharmaceutical, biological, cosmetic, bioprocess, food and brewing industries. The samples of application: biopharmaceutical blood products atibiotics cough syrup intravenous solutions bioprocess solutions cosmetic, food and brewing products spiritus water food and beverages: water, wine and beer pharmaceutical : API water biotechnology: cell crop, plasma fractions, chemical solutions

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Technical data: 1 drive unit / 1 revolving unit maximum load 20 to. Roll diameter 470 mm Roll width 250 mm Drive unit dimensions 2800 x 1300 x 1600 mm Unit 2800 x 1100 x 1600 mm, running with dimensions

System: Container, swap body Exterior length: 7650 mm External height: 3025 mm Outer width: 2500 mm Year: 09/1997 Empty weight: Tara 3200 kg Filling weight: Gross 16000 kg Condition: General wear, scratches Number: 5 units Other: parking feet, roll-up door, keyhole plates Color: white

J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.

P74 - used appr. 18 m³ / 18,000 litres polyester tank / GRP-tank, aboveground, on 3 steel bases, in good condition. volume: appr. 18 m³ / 18,000 litres material: polyester / GRP length: appr. 5.80 m height: appr. 2.40 m total diameter: appr. Ø 2.00 m Aboveground storage tank, round shape, resting horizontally on 3 steel bases, dome on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater collection tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold b ...

Mixer for gentle mixing of temperature-sensitive masses with resins, waxes, etc., incl. control cabinet and AZO weighing scale (1,500 l., on 3 measuring cans), without mixing container. Product-contacted parts made of stainless steel.