press brake used for sale

Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg

1000 l oil cabinet dispensing quantity selectable. Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not identifiable .

Max. Sheet format: 680 x 780 mm Min sheet format: 240 x 240 mm No chemistry Improves pressroom productivity, reduces makeready time. Open interface supports most rips and prepress workflows Cip3 compatible Protek aww 650 processor Very good condition Available immediately

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Year: 2010 - technically efficient, ready to work - after full service - cooling installation - copy template - pneumatic clamping set

Machine for cutting, cutting, folding and extrusion of sheet metal Projection: 1250 mm Number of beats/min: 560/1120/2240 beats per minute Stroke height: 2 – 10 mm Cutting speed: 0.5 – 8 m/min Max. sheet thickness: 9 mm Power supply: 380/50 V/Hz Power: 3.9KW Weight: 1.72 t Dimensions: 2.3 x 0.9 x 1.6 m

Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop

General SKU004Y057 LocationBarneveld MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout

saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Description: Saw blade diameter 400 mm Cutting length max. 4000 mm Cutting area flat 140 x 190 mm Speed 2890 rpm Motor power 2.2 kW each Connected power 4.5 kW Machine weight approx. 0.75 t Dimensions LxWxH 5.0 x 1.0 x 1.7 m a pneumatic cylinder must be retrofitted. Approx. Onsite Dimension. (l x w x h): 5,000 x 1,000 x 1,700 mm, weight approx.: 750 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Manufacturer : Fette Model: Perfecta 2000 Year : 1988 Type : Automatic tablet press Machine weight: 2200 kg   Number of pressing stations : 36 Maximum compression force : 80 kN Maximum pre-compression force: 15 kN Maximum tablet diameter : 16 mm Maximum tablet thickness: 8.5 mm Maximum hourly output: 245,100 tablets Maximum filling height: 18 mm Divided circular scale diameter: 410 mm Die plate speed: 25-95 rpm Die diameter: 30.16 mm Die height: 22.22 mm Punch body diameter: 19 mm Punch length: 133.6 mm Punch insertion depth in die: 2 - 6 mm Overall footprint: 1212 x 1126 mm

Perfecta 1000 rotary tablet press with electrical cabinet   Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 - 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Manufacturer: Sefitec Year : 1982 Type : Filter press Trays : 800 x 800 mm Quantity : 65 units Capacity : 446 dcm3 Surface : 30 m2 Hydraulic unit 1,1 KW Stainless steel coating Discharge: manual

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 50TE -Capaciteit 50 ton -Max druk pomp 25 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 790 mm -Afmeting table 400 x 800 mm -Afmetingen 1500 x 650 x 1950 mm -Weight of 980 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled CNC crowning Hydraulic felling table WILA NS Hydraulic top clamping 1 set of tools

Capacity 2050 x 50 tons Safan TS1 CNC control Manual Wila New Standard clamping X and R axis CNC controlled Includes set of tools

3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Capacity: 40 ton x 2050 mm Backgauge: CNC Control: TS Passage between uprights: 2050 mm Max stroke: 115 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 13,5 kW Length: 2900 mm Depth: 1850 mm Height: 2620 mm Weight: 3150 kg

Pad for folding tool, bending tool, die, lower blade, lower tool, prism tool, turning prism, 1-piece die block for press brake, die tool, folding tool -Pad for press brake tool: from press brake Promecam STPC 250 40 121 -Length: 4200mm -Dimensions: see the drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 Kg

We hereby offer this new WE 22032 press brake from 2023, located in Belgium. This press brake, equipped with the advanced Delem DA53T control unit, packs a powerful punch with a pressing force of 220 Ton. Its impressive 3200 mm bending length ensures versatility in shaping various materials, while handling steel thicknesses up to 12 mm with precision. Elevate your metalworking capabilities with this state-of-the-art WE 22032 press brake, setting a new standard for efficiency and performance in the industry. Technical specifications: Year: 2023 Control unit: Delem DA53T Pressing force: 220 Ton Bending length: 3200 mm Carbon steel thickness: 8.5 mm Stainless steel thickness: 4.2 mm Steel thickness: 12 mm Axis stops: Y1, Y2, X, R, V Voltage: 380 V, 50 Hz, 3 Phase Dimensions: Length: 3800 mm Width: 2200 mm Height: 2850 mm Weight: 12800 kg Features: -DA53T CNC (Y1,Y2,X, ...

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...

BEYELER 80 Ton Press brake On offer is a BEYELER press brake, year 1991, CNC control, 80 t pressure, length 2 m,

Durma CNC 3HAP 60400 Press Brake and Durma AHGM 6016 NC Guillotine Shear Both machines are in good working condition Press Brake : 6050 mm 400 Ton Guillotine Shear: 6000 mm maximum cutting length Maximum cutting thickness : 16 mm

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for press brake: divided 17 pieces -Tool: 30 ° -Dimensions: 145 x 35 mm -Total length: 2675 mm -Lengths: 7 x 250 mm / 1 x 175/170/90/85/80/75/70/65/60/55 mm each -Transport dimensions: 600/400 / H170 mm -Weight: 63.2 kg

Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -Dimensions: 3000/30/H116 mm -Weight: 48 kg

Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool for: press brake -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg

Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -Dimensions: 175 x 26 mm -Total length: 315 mm -Weight: 8 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 46 mm -Total length: 355 mm -Lengths: 50/50/75/85/95 mm -Weight: 14 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 88° -Dimensions: 188 x 55 mm -Total length: 351 mm -Lengths: 341/10 mm -Weight: 18.6 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 1594 mm -Lengths: 26/41/47/50/59/60/100/197/200/216/598 mm -Weight: 62 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 165 x 47 mm -Total length: 2900 mm -Lengths: 200/300/400/500/500/1000 mm -Weight: 112 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 800 mm -Lengths: 45/50/55/60/90/500 mm -Weight: 28 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 190 x 45 mm -Total length: 2125 mm -Lengths: 20/25/30/35/40/45/50/55/60/65/70/75/80/85/90/100/200/500/500 mm -Weight: 84 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 88° -Dimensions: 190 x 55 mm -Total length: 1126 mm -Lengths: 338/338/450 mm -Weight: 54 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 170 x 60 mm -Total length: 2540 mm -Lengths: 20/40/80/160/320/640/1280 mm -Weight: 88 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool for: press brake -divided -Tool: 82° -Dimensions: 145 x 43 mm -Total length: 2946 mm -Lengths: 25/30/35/40/50/70/100/200/200/300/400/500/996 mm -Weight: 92 kg