We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Bending length 4000mm - Slide stroke 250mm - - DELEM DA58 CNC driving X/Y axes - Electric backgauge - Pneumatic R-axis - Tooling available
used
Folding length: 3100mm; Gooseneck depth: 400mm; Passage between uprights: 2600mm; Passage between decks: 465mm; Equipment: CNC DELEM DA66T Number of axes: 6 Y1Y2,X,R,Z1Z2 CNC managed table crowning Front brackets FIESSLER laser
used
Folding length 4000mm; Equipment: Controller 600M 3 axes: Y1/Y2/X Manual R Manual table dome Front bracket Several multi-vees available
used
Folding length: 3100mm; Equipment: CNC AMNC/PC 8-axis Y1Y2/X1X2/R/Z1Z2 Motorized AKAS laser
used
Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.
used
Haco - Com PPM 220 ton x 4100 mm CNC Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 80 mm Working speed: 9 mm/sec Returning speed: 80 mm/sec Electric motor (power): 25 HP Length: 5400 mm Depth: 2400 mm Height: 2800 mm Weight: 16 ton
used
Max. pressing force: 2000kN, max. working length: 2600mm, max. stroke: 265mm, throat depth: 300mm, weight: 16t.
used
Working width: 4100mm, pressing force: 1250kN, controls: DNC 80, length: 4350mm, width: 1300mm, height: 2660mm, weight: 11t, including tools.
used
Working length: 3500mm, the pressure bar of the machine must be realigned.
used
Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools.
used
Working length: 4000mm, pressing force: 3000kN, distance between the columns: 3550mm, table width: 500mm, installation height: 460mm, connected load: 30kW, weight: 30t, with accessories and documentation.
used
Pressing force: 700kN, working length: 700mm, distance between the coloums: 350mm, stroke: 165mm, length: 955mm, width: 1685mm, height: 2501mm, weight: 2.3t.
used
Working length: 3050mm, pressing force: 2500kN, number of operational hours unknown, including set of tools and documentation, on-site inspection is possible.
used
Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation.
used
Working width: 4000mm, pressing force: 160t, control: MNC 95/C, connected load: 18kW, length: 4100mm, width: 1900mm, height: 3100mm, weight: 14.5t, including tools, the documentation is partially available, the laser system requires maintenance.
used
Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K.
used
Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly.
used
Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.
used
Max. working width: 3100mm, max. stroke: 400mm, max. pressing force: 2000kN, weight: 16.6t.
used
Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible.
used
Y1 + Y2 + X + V (Hydraulic crowning in table) Capacity: 80 ton Backgauge: CNC Control: CNC Safan Passage between uprights: 2050 mm Max stroke: 140 mm Max distance between table -- ram: 430 mm Depth of throat: 400 mm Table width: 55 mm Locking speed: 65 mm/sec Working speed: 9 mm/sec Returning speed: 57 mm/sec Electric motor (power): 5,5 kW Length: 3050 mm Depth: 1550 mm Height: 2450 mm Weight: 5,8 ton
used
LVD PPBL 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: manual Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 80 mm/sec Working speed: 6,7 mm/sec Returning speed: 67 mm/sec Electric motor (power): 11 kW Length: 3300 mm Depth: 1750 mm Height: 2920 mm Weight: 11 ton
used
LVD PP 200 ton x 6100 mm Capacity: 200 ton x 6100 mm Backgauge: manual Passage between uprights: 4050 mm Max stroke: 200 mm Max distance between table -- ram: 550 mm Depth of throat: 300 mm Table width: 250 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 50 Electric motor (power): 15 HP Length: 6200 mm Depth: 2000 mm Height: 4100 mm Weight: 26 ton
used
pressure: 100 t chamfer lenght: 125 mm distance between columns: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: gebraucht : 1995 : 8276 : prompt, Zwischenverkauf v : Türkei : 22500 € nachgerüstete Digitalanzeige Maper HT072 Gleichlauf über Torsionswelle 2 Hinteranschlagfinger 2 vordere Auflagearme seitliche und hintere Schutzgitter, 2-Hand und Fuß Bedienpult 1 Multi V Matrize 3100x100x100mm 1 Matrize 3100x80x80 mit 1 V (V16, 30°) 1 gekröpftes Oberwerkzeug 3050x130x44, in 2 Teilen 1 gekröpftes Oberwerkzeug 3050 x 130 x 50, geteilt 1 gerades Oberwerkzeug 3050x120x34mm 30° geteilt Betriebsanleitung DEUTSCH ENTSPRICHT DER DEUTSCHEN UVV &, ÖSTERREICHISCHEN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
8 axes: Y1 / Y2 / X / X´ / R / Z1 / Z2 / V lvd tooling upper hydraulic clamping Capacity: 170 ton x 3100 mm Backgauge: CNC Control: 2D touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 100 mm/sec Working speed: 12 mm/sec Returning speed: 130 mm/sec Electric motor (power): 27 kW Weight: 11,5 ton
used
Amada Promecam HFB 170 ton x 4230 mm CNC Capacity: 170 ton x 4230 mm Backgauge: CNC Control: Delem DA58 Passage between uprights: 3760 mm Max stroke: 180 mm Max distance between table -- ram: 450 mm Depth of throat: 410 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 11 kW Length: 4980 mm Depth: 2240 mm Height: 2840 mm Weight: 13 ton
used
3 axes: Y1 / Y2 / X Capacity: 200 ton x 3600 mm Backgauge: CNC Control: Elgo Passage between uprights: 3050 mm Depth of throat: 400 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 70 mm/sec Electric motor (power): 15 kW Length: 4000 mm Depth: 2200 mm Height: 2800 mm Weight: 12 ton
used
Haco PPM 135 ton x 4300 mm CNC Capacity: 135 ton x 4300 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3750 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 6 mm/sec Returning speed: 60 mm/sec Electric motor (power): 7,5 kW Length: 4470 mm Depth: 1550 mm Height: 2700 mm Weight: 10,4 ton
used
Y1 / Y2 / X Lasersafe security Cadman Express touchscreen control Amada upper tooling as standard Willa upper adaptorclamps included as option Lower flattening die Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Cadman Express Electric motor (power): 23 kW Length: 5100 mm Depth: 1900 mm Height: 2850 mm Weight: 12 ton
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 40000 € : 808 € : 40 to : 1500 mm : X und Y Achse : 150 mm/s : 160 mm : 1100 mm : 320 mm : 390 mm : hydraulisch : 10 mm/s : 500 mm : 4 kW : 1700 mm : 1600 mm : 2230 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN (sample photo) Laser Protection Device Fiessler € 6 500,00 Controlled R-axis € 2 200,00 ManualCrowning device € 2 300,00 Motorized Crowning device € 4 000,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 45000 € : 909 € : 60 to : 2150 mm : X und Y Achse : 150 mm/s : 160 mm : 1100 mm : 320 mm : 390 mm : hydraulisch : 10 mm/s : 500 mm : 5.5 kW : 1700 mm : 1600 mm : 2230 mm : 5450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN (sample photo) Laser Protection Device Fiessler € 6 500,00 Controlled R-axis € 2 800,00 Manual Crowning device € 2 800,00 Motorized Crowning device € 4 200,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Standard configuration ? Stable machine frame as a welded, all-steel construction ? Ram (press beam), highly resistant to torsional forces ? Electrohydraulic downstroke drive via proportional valves ? Modern block hydraulics ? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front ? Modufix upper tool clamping system, manual ? Lower tool holder for single-V dies, manual clamping, programmable shifting ? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD) ? Safety equipment Additional equipment Crowning options ? CNC crowning Backgauge system options ? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system ? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic ? ACB Preparation Material handling options ? 2 front support brackets
used
Capacity: 100 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: BC 55 Graphical Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 100T Dis. Beam - Table: 400mm Beam stroke: 200mm Troth beam: 250mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Control: BC 55 Graphics Crowning: & ...
used
Capacity: 300 t Folding length: 4300 mm CNC Brand: Delem CNC Model: Delem DA65 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 300T Dis. Beam - Table: 485mm Beam stroke: 300mm Table Width: 250mm Troth beam: 400mm Approch speed: 80mm/min. Working speed: 10mm/min. Return speed: 80mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: &n ...
used
Capacity: 40 t Folding length: 1000 mm CNC Brand: Delem Max. bending length: 1000mm Distance between column: 800mm Max. pressing force: 40T Beam stroke: 100mm Table Width: 90mm Troth beam: 250mm Approch speed: 110mm/min. Working speed: 11mm/min. Return speed: 105mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 4 Power: 4,8kW Length:   ...
used
Capacity: 320 t Folding length: 4050 mm CNC Brand: _Unknown / Other CNC Model: T8000Te 3D TOUCH 2019 new TRUMPF T8000Te TOUCH Large upper toolling set Large lower tooling set Bending arm front side 45 Gr Over floor machine NOT in ground Max. bending length: 4050mm Distance between column: 3550mm Max. pressing force: 320T Dis. Beam - Table: 730mm Beam stroke: 350mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis ba ...
used
Type: HFT 130-3 3 axes: Y1 / Y2 / X Capacity: 130 ton x 3140 mm Backgauge: CNC Control: Graphique CD2005 Passage between uprights: 2700 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 420 mm Table width: 90 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Length: 3995 mm Depth: 2020 mm Height: 2820 mm Weight: 8150 kg
used
Capacity: 135 t Folding length: 3050 mm CNC Brand: _Unknown / Other Max. bending length: 3050mm Distance between column: 2550mm Max. pressing force: 135T Dis. Beam - Table: 310mm Beam stroke: 130mm Table Width: 180mm Troth beam: 200mm Approch speed: 100mm/min. Working speed: 9mm/min. Return speed: 65mm/min. Adjustment X-Axis back gauge:1000mm Power: 7.5kW Length: &nb ...
LVD PPS 100 ton x 3050 mm CNC Capacity: 100 ton x 3050 mm Backgauge: CNC Control: touch screen Passage between uprights: 2550 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 13 kW Length: 4050 mm Depth: 2750 mm Height: 2700 mm Weight: 9 ton
used
Capacity: 150 t Folding length: 360 mm CNC Brand: Robosoft Max. bending length: 3600mm Distance between column: 3100mm Max. pressing force: 150T Dis. Beam - Table: 450mm Beam stroke: 200mm Troth beam: 250mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 1000mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: Yes Power: ...
used
Capacity: 85 t Folding length: 2720 mm CNC Brand: _Unknown / Other CNC Model: TASC 6000 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking Backgauge 4-axes system Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Max. bending length: 2720mm Distance between column: 2260mm Dis. Beam - Table: 735mm Beam stroke: 445mm Table Width: 120mm Troth beam: 420mm Approch speed: 220mm/min. Working speed: 25mm/min. ...
used
Capacity: 320 t Folding length: 4420 mm CNC Brand: Trumabend CNC Model: TASC 6000 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking Backgauge 4-axes system Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Max. bending length: 4420mm Distance between column: 3680mm Max. pressing force: 320T Dis. Beam - Table: 735mm Beam stroke: 445mm Table Width: 200mm Troth beam: 420mm Approch speed: 220mm/min. Working speed: &nb ...
used
Capacity: 130 t Folding length: 3230 mm CNC Brand: Trumabend CNC Model: TASC 6000 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking Backgauge 4-axes system Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Max. bending length: 3230mm Distance between column: 2690mm Max. pressing force: 130T Dis. Beam - Table: 505mm Beam stroke: 215mm Table Width: 120mm Troth beam: 420mm Approch speed: 220mm/min. Working speed: &nb ...
used
Capacity: 100 t Folding length: 3200 mm CNC Brand: Delem CNC Model: Delem DA-65W Backgauge 1000 mm with R and Z Axis SICK Laser safety guids Crowning in lower table construction Max. bending length: 3200mm Distance between column: 2550mm Max. pressing force: 100T Dis. Beam - Table: 420mm Beam stroke: 220mm Troth beam: 500mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 180mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 4 Crowning: ...
used
Capacity: 230 t Folding length: 3100 mm CNC Brand: Trumabend Max. bending length: 3100mm Distance between column: 2690mm Max. pressing force: 230T Dis. Beam - Table: 615mm Beam stroke: 445mm Table Width: 180mm Troth beam: 420mm Approch speed: 220mm/min. Working speed: 10mm/min. Return speed: 220mm/min. Adjustment X-Axis back gauge:1000mm Crowning: Yes Hydraulic toolclamping: ...
used
Capacity: 175 t Folding length: 3050 mm CNC Brand: Delem CNC Model: DELEM DA-56 Max. bending length: 3050mm Distance between column: 2600mm Max. pressing force: 175T Dis. Beam - Table: 530mm Beam stroke: 265mm Table Width: 104mm Troth beam: 450mm Approch speed: 160mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 4 Crowning: ...
Haco PPEC 35 ton x 1600 mm CNC Capacity: 35 ton x 1600 mm Backgauge: CNC Control: 2D touch Passage between uprights: 1100 mm Max stroke: 100 mm Max distance between table -- ram: 295 mm Depth of throat: 195 mm Table width: 110 mm Locking speed: 80 mm/sec Working speed: 11 mm/sec Returning speed: 70 mm/sec Electric motor (power): 4 kW Length: 2600 mm Depth: 1500 mm Height: 2240 mm Weight: 2500 kg
used
Haco PPH 200 ton x 3600 mm Capacity: 200 ton x 3600 mm Passage between uprights: 3100 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 70 mm/sec Working speed: 8,8 mm/sec Returning speed: 74,6 mm/sec Electric motor (power): 25 HP Length: 4100 mm Depth: 1900 mm Height: 2700 mm Weight: 12 ton
with Willa hydraulic clamping conical bending Capacity: 400 ton x 4300 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3800 mm Max stroke: 300 mm Max distance between table -- ram: 546 mm Depth of throat: 400 mm Locking speed: 90 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 37,5 kW Length: 4500 mm Depth: 2500 mm Height: 3858 mm Weight: 34 ton