press brake manual used for sale

Lever hoist, ratchet hoist KAISER +KRAFT Type: 1117 Load capacity: 3000 kg Chain length: 1500 mm used, tested ! Dimensions: 800 x 250 x 230 mm

Lever hoist, ratchet hoist PAGUS load capacity: 6300 kg stroke: 3000 mm with roller chain used, tested ! weight: 59 kg Dimensions: 1000 x 800 x 230 mm

Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm

Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm

SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V

SPECIFICATIONS: Machinable width: max. 300 mm Wheelbase: 32 mm Installed power: 1.2 HP Voltage: 380 V

Manuals for Heidelberg Quickmaster 46- one and two color: Spare part book -multilingual and instruction manual in German. In very nice condition, no pages missing. Can ship worldwide.

Year of construction 2020 manual bookbinding machine Table model for manual operation Delivery date: short-term Price on request. We supply and install worldwide.

Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...

Faber SMESAMA Manual disk cutter 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph

Forklift hydraulic/manual operations, max load wight 600 kg

New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.

New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-44803-297

With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-44803-168

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-44803-67

With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-44803-58

Spur gear block hoist, spur gear chain hoist, manual chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1000 kg -Max. Stroke: 4800 mm -Dimensions: 280/600/H190 mm -Weight: 38 kg

Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

- Includes:. - PRAMAC GS hand pallet truck: serial number 723083, year of manufacture 2004, load capacity 2500 kg, fork dimensions 1150 x 700 mm. - BONZONI hand pallet truck: serial number TSM9611806, year of manufacture 1996, load capacity 2200 kg, fork dimensions 1150 x 700 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-24

Manual Powder Coating System – Control Unit General data: Equipment type: Control unit (gun controller) for electrostatic powder spraying Weight: approx. 100 kg Dimensions (L x W x H): approx. 600 x 800 x 1100 mm Technical details: Power supply: 85 – 250 VAC Frequency: 47 – 440 Hz Air control: integrated connections for airflow regulation Description: Manual powder coating control unit designed for electrostatic powder spraying applications. The system allows precise control of coating parameters and airflow, ensuring efficient and uniform coating results in industrial environments. Auction-ID: A7-45351-5

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-294

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-99

Spacing : 2000 mm Permissible diameter on bench : 720 mm Diameter on straggler : 430 mm X stroke : 410 mm Z stroke : 2000 mm Spindle speed : 1 – 1800 rpm Spindle bore : 106 mm Spindle nose : DIN 55027 size 11 Installed power : 28 kW Power supply : 400 V Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-206

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-293

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-295

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-296

2 UNITS/SETS OF NRH0001 PACKED TOGETHER. A SINGLE NRH0001 CORRESPONDS TO: Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x NRH0001 PACKED TOGETHER: 530 x 800 x h750 mm - 164 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45363-297

Soxtec FOSS ST 243 Manual Extraction System Semi-automatic laboratory extractor Reference : ST243 SOXTEC With Controller: CU 2046 Control Unit Year of manufacture: 2016 Without accessories Animal feed, feed ingredients, fodder, pet food, human food, food ingredients, grains, cereals, oilseeds, DDS, meat, meat products, fish, fish products, dairy products, environmental products (e.g. soil, sludge, wastewater) and other industrial products (e.g. pulp, textiles, rubber, tobacco, fertilisers, detergents, plastic materials, etc.). Crude fat, total fat and extractables

- Fork dimensions 1150 x 680 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-40

Complete with support; Supply voltage: 220V, 50-60Hz; Power: 30 Watts. Serial: DSA 99015 Estimated weight: 10 kg Approximate dimensions: 360x340xh310 mm Auction-ID: A7-44996-191

1x manual hydraulic scissor lift table, load capacity 250 kg , year of man. 2004 Auction-ID: A1-45187-381

High lift manual pallet truck, 1000kg max, S/No 470714, ANR 2467 Auction-ID: A1-45187-167

1 x Manual hydraulic scissor lift table, load capacity 250 kg , year of man.2004 Auction-ID: A1-45187-382

1 x Manual hydraulic scissor lift table, load capacity 350 kg , year of man. 2023 Auction-ID: A1-45187-383

Manual sweeper, 3 brushes. Overall dimensions 650x550x300 mm Auction-ID: A7-44864-55

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain / Siemens TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmRated speed:1,800 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded cla ...

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg