press brake manual used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Crosscut and miter saw, pull saw, chop saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double miter -Manufacturer: Pressta Eisele, underfloor circular saw with double miter -Motor power: approx. 1.5 kW -Speed: approx. 2820 rpm -Saw blade: Ø 350 mm, swivels left 45° / right 90° -Cutting area: 90° flat 270 x120 mm -Cutting area: 45° flat 210 x 120 mm -Workpiece clamping: pneumatic horizontal clamping devices left and right -Cross stop: movable -Transport dimensions: 860/730/H1250 mm -Weight: 175 kg with pallet

Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg

1000 l oil cabinet dispensing quantity selectable. Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not identifiable .

Max. Sheet format: 680 x 780 mm Min sheet format: 240 x 240 mm No chemistry Improves pressroom productivity, reduces makeready time. Open interface supports most rips and prepress workflows Cip3 compatible Protek aww 650 processor Very good condition Available immediately

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Year: 2010 - technically efficient, ready to work - after full service - cooling installation - copy template - pneumatic clamping set

Machine for cutting, cutting, folding and extrusion of sheet metal Projection: 1250 mm Number of beats/min: 560/1120/2240 beats per minute Stroke height: 2 – 10 mm Cutting speed: 0.5 – 8 m/min Max. sheet thickness: 9 mm Power supply: 380/50 V/Hz Power: 3.9KW Weight: 1.72 t Dimensions: 2.3 x 0.9 x 1.6 m

Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop

General SKU004Y057 LocationBarneveld MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout

saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Manufacturer : Fette Model: Perfecta 2000 Year : 1988 Type : Automatic tablet press Machine weight: 2200 kg   Number of pressing stations : 36 Maximum compression force : 80 kN Maximum pre-compression force: 15 kN Maximum tablet diameter : 16 mm Maximum tablet thickness: 8.5 mm Maximum hourly output: 245,100 tablets Maximum filling height: 18 mm Divided circular scale diameter: 410 mm Die plate speed: 25-95 rpm Die diameter: 30.16 mm Die height: 22.22 mm Punch body diameter: 19 mm Punch length: 133.6 mm Punch insertion depth in die: 2 - 6 mm Overall footprint: 1212 x 1126 mm

Perfecta 1000 rotary tablet press with electrical cabinet   Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 - 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Manufacturer: Sefitec Year : 1982 Type : Filter press Trays : 800 x 800 mm Quantity : 65 units Capacity : 446 dcm3 Surface : 30 m2 Hydraulic unit 1,1 KW Stainless steel coating Discharge: manual

Description: Inner diameter: 220 mm Inner belt width: 200 mm Load capacity per reel: 150 kg (reel must be bolted to the floor) , Incl. wiring diagram weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,240 x 1,120 x 2,200 mm

This PRESSTA EISELE Profilma 600 R was manufactured in 2013. It features a 9.2 kW drive with an 18.5 kW reinforced option and uses saw blades with a diameter of 600 mm. The cutting range allows for a maximum cutting height of up to 210 mm and a maximum cutting width of 350 mm. It includes a Siemens S7-300 control system and a chip extraction system with a 4 kW motor. Contact us for more information.

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Two-pillar Manual Spindle Press Hiller & Lutz HILU HP 70 manufacturer: Hiller & Lutz type: HILU HP 70 mach.-Nr.: 1047 year of construction: ? comm.-Nr.: 3990300/009 stock-nr.: 1885 + Regular Price: 2.650,- € > Reduced Price: 1.325,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: ca. 25 t spindle diameter: 70 / 140 mm width between columns: 350 mm max. height between table and plunger: 300 mm spindle hub max.: 220 mm table surface (width x depth): 300 x 300 mm pass-through hole in table: Ø 80 / 120 mm mortise in plunger: Ø 40 mm weight: ca. 550 kg standing area: W 0,65 x D 0,45 x H  ...

Hand lever press to push pins in printed circuit boards

Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Ricy press with foot release

Foot pendulum press

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

Year of construction 1962 manual hot stamping press Hot foil stamping machine Foil reel Underframe 2 side tables Price on request. We deliver and install worldwide!

Cold press Press platen sizes: 3100 x 1300 mm. Opening: 420 mm 6 hydraulic upstroke rams: 6 x 70 mm Total pressure: 70 tons

Key data: 40 t

Specifications: Compressive force 40 tons max. achievable compressive force 50 tons Table size W x D approx. 650 x 550 mm Passage between uprights 650 mm Diarrhea hole 150 mm Plunger 580 x 250 mm

Hand screw press - type "NEHER" -Good used condition Dimensions: LxWxH 1.4x1.2x2.3Meter Weight 850Kg Wckq0zxa

Key data: 8 t, 420 mm, 120 mm

Machine Type: Hand Spindle Press Manufacturer: SCHULER Condition: good Offer Type: Used Machine Specifications: Compressive force: 8 t Projection: 120 mm Table: 420 x 235 mm Installation height: 175 mm Weight: 250 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Key data: 20 t

Article code: 13-13-023 Manufacturer: Neher Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1600x1600x2300mm Weight: approx. 1200kg Max. pressing force: approx. 20 tons Wheel Diameter: ca.1600mm Working stroke: approx. 300mm Other accessories on request Price and other technical data on request

Key data: 20 t, 420 mm

Article number: 13-13-024 Manufacturer: Reyer Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1200x800x2000mm Weight: approx. 400kg Max. pressing force: approx. 20 tons Table surface: approx. 420x530mm Other accessories on request Price and other technical data on request

Description: stroke 70 mm Approx. Onsite Dimension. (l x w x h): 200 x 300 x 700 mm, weight approx.: 30 kg

Description: table dimensions approx. 315x215 Approx. Onsite Dimension. (l x w x h): 1,000 x 960 x 2,160 mm, weight approx.: 300 kg

Description: Serial number: 04004748 Table dimensions: 300 x 230 mm With 3 grooves Approx. Onsite Dimension. (l x w x h): 400 x 300 x 700 mm, weight approx.: 70 kg

manual casemaker CMC Q-cover 1 (similar to LPA 50-110) format: max 50x110cm; min. 12x15 cm Machine comprising of: - Gluer for hot and cold glue (PVA) - Vacuumtable with board guides for 1-3 cardboards (up to 5 as option) - Turning in unit (1 side) - Roller press - Delivery table

manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort

offer consist of: - manual device HMU-80 Horizon HMU-80 manual device - compatibel with: Horizon MC-80a / MC-80m / MC-80c; very good

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

Type WLG Made in Germany 1981 y.

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Brand: Lisec Type: Manual Frame Machine Model: RSVN-48/25u Serial Number: 322-002861 Construction year: 2000 Weight: 1,15 tons Power: 1,10 kVA Air pressure: 6 bar Machine demention LxWxH mm 4900 x 1500 x 3150 Transport size L x W x H: Bij arrangement Min.-max. glass thickness: Trippel Min. glass size: 1800 Max. glass size: 3500x2500 Condition machine : Good Control type: B&R Electric. Connection: 400+N Missing parts: Unknown Instructions: Available by Lisec Electric diagram: Yes Parts list: Available by Lisec Available software: Yes Photos/film available: Photos and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (23077), Cork pasting machine (23078), Press with gas station (23079, Line scanner (23080) and Turning Station (23124)

honing diameter: 110 mm stroke: 150 mm throat: mm total power requirement: 2,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual static postformer Min/Max. workpiece length 1600 / 3100 mm. Profile height max.150 mm. Workpiece thickness min. 16 mm. Working height 950 mm. DOCUMENTATION AVAILABLE

Working width: 2000mm, weight: 1.65t.

Output: 40 packages/min, compressed air supply: 6bar, length: 680mm, width: 800mm, height: 1060mm, weight: 35kg, with compressor and documentation.