133,382 used machines on RESALE, but how to find them? Machine Search
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...
Forklift hydraulic/manual operations, max load wight 600 kg
New device!, completely made of stainless steel, for a daily output of up to 200 cans, suitable up to can diameter: max. 157 mm and max. can height: 266 mm, capacity: approx. 6-10 cans/min, opens cans with a single manual movement, no sharp edges ( burr ) on the can.
New device!, O Opens cans with a single manual motion, O Powerful manual lid punch (Crown Punch), O Recommended for a daily output of up to 200 canisters/day., O No sharp edges on the can due to the use of half-stump knives., O For extra large containers (custom-made tools required. Available separately), completely made of stainless steel, suitable up to can diameter: max. 230 mm and max. can height: 328 mm, Power: approx. 6-10 cans/min,
Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg
Soxtec FOSS ST 243 Manual Extraction System Semi-automatic laboratory extractor Reference : ST243 SOXTEC With Controller: CU 2046 Control Unit Year of manufacture: 2016 Without accessories Animal feed, feed ingredients, fodder, pet food, human food, food ingredients, grains, cereals, oilseeds, DDS, meat, meat products, fish, fish products, dairy products, environmental products (e.g. soil, sludge, wastewater) and other industrial products (e.g. pulp, textiles, rubber, tobacco, fertilisers, detergents, plastic materials, etc.). Crude fat, total fat and extractables
max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term
Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3
Hyllus 285 three-roll manual plate bending machine for bending and calendering sheet metal.
- manufactured entirely from stainless steel AISI 304, - designed for the internal rinsing of new bottles and jars, -completed with the use of pre-filtered air or water via spray nozzles prior to container filling Method of function. - the operator manually collects the container and inverts it over the spray nozzle, - the application of light pressure opens the liquid/pneumatic valve internally rinsing/blowing the container, - a short standing time should be allowed for any residual water to drain, - the machine will be supplied with water or air filtration system to suit customer requirements. Production: indicative up to 300 b/h Dimensions: 600mm X 500mm X H 600 Weight: 25 kg. Optional: recirculation with pump
The Lemorau CT 1500 is a manual core cutter., Quick and easy change-over for multiple core diameters and wall thickness., The CT 1500 is very easy to operate, after sliding the parent core onto the mandrel,, the operator sets the end-stop, which determines the width of thecores cuts., The operator then presses the start button, lowers the knife using the handle and cuts the core., - Maximum core length up to 1500 mm (59”), - Including standard core diameters: 25, 40, 50, 76 mm (1”, 1.57”, 2”, 3”), - Other sizes up to 152 mm (up to 6”) as an optional, - Maximum measured cut length 330 mm (13”), - Maximum wall thickness 6 mm (0.23”) cardboard, - Dual-hand control for operator safety
with osmosis device, oil separator and drip pan Dimensions: width x depth x height = 4.1m x 7.1m x 4.1m (double bottom tray) Workpiece for machining max.: width x depth x height= 1m x 5.2m x 2.1m
- Load capacity 2000 kg. - Fork dimensions 1150 x 580 mm. - Maximum lift 145 mm. - Operating conditions of this machine: unchecked. Auction-ID: A7-48839-7
Manual pallet truck scale with integrated electronic display allowing pallet handling and weighing in a single operation. Equipped with standard forks, manual hydraulics and digital weight control display. Suitable for warehouses, logistics services, shipping areas, stores and storage spaces. Sold in accordance with the photographs. Auction-ID: A1-48554-347
Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-348
Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-352
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-49495-335
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-49495-344
Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-351
Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-344
Hydraulic manual pallet truck for handling pallets and various loads. Equipped with an ergonomic drawbar, standard forks and travel wheels. Simple and robust solution for warehouses, workshops, storage areas, shipping and logistics. Functional hardware with normal wear and tear from use. Auction-ID: A1-48554-350
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-49495-384
Serial number: 100135 Power: 1.1 kW Max. span: approx. 250 mm Reference: Walter - Lot 191 Auction-ID: A7-49834-27
Serial number: 00/138/95 Operating voltage: 230 V Connection: 60 W Reference: Baumstark - Lot 59 Auction-ID: A7-49882-89
Manual drum lifter from DENIOS with hydraulic lifting mechanism for the safe lifting and transport of drums. The device is designed for drums with a maximum weight of 300 kg and has a drum clamping device with gripping mechanism. It is used for internal logistics, in particular the handling and positioning of industrial and chemical drums. The device is used and shows normal signs of use due to use. A test sticker from LINDIG with next inspection year 2025 is available, a tested sticker documents an inspection on 07.10.2018.Scope of delivery: 1 drum lifter DENIOS FL 8-M Without further accessories Type: FL 8-M Year of construction: 2019 Max. load capacity (drum weight): 300 kg Serial number: 111310459-000100-001 Test standard: FEM 4.004 (95/63/EC, 99/92/EC, 2001/45/EC) Next inspection: 2025 ― Length: approx. 120 cm Width: approx. 100 cm Height: approx. 165 cm Auction-ID: A ...
For sale is a robust machine slewing crane with a load capacity of 1,500 kg, including HADEF hand chain hoist with 1.5 t load capacity and trolley. The crane was originally mounted on a 180 t injection moulding machine in a clean room. It was used there for lifting, assembly and maintenance work, as there was no overhead crane in this production area. The crane, the trolley and the chain hoist are operated manually. Technical data / equipment: Design: Machine slewing crane / assembly crane Crane load capacity: 1,500 kg Projection / arm length: approx. 1,100 mm Chain hoist: HADEF manual chain hoist Load capacity chain hoist: 1.5 t Manual operation Trolley / Chassis Solid steel construction Swivel design Originally mounted on a 180 t injection molding machine Location: Cleanroom production Dismantled state Scope of delivery complete according to illustrations Used condition with us ...
Working parameters: Universal manual grinding machine on a rack for tool sharpening. Equipment included: longitudinal table with T-slots, swivelling tool head, spindle/grinding wheel with protective housing, manual adjustments via handwheels, visible dial dial and pneumatic device. Notes: Industrial cast iron construction. Auction-ID: A1-50001-5
Manufacturer: VOLLMER Work parameters: Manual column grinding machine for sharpening cutting tools. Notes: Construction on cast iron column frame. Auction-ID: A1-50001-8
Manufacturer: VOLLMER / ELITE Working parameters: Universal manual grinding machine for sharpening and grinding cutting tools. Equipment included: longitudinal table with T-slots, swivelling grinding head, grinding wheel, swivelling and adjustable tool holder, manual movements via handwheels and integrated electric controls. Auction-ID: A1-50001-11
INTERSCIENCE - Scan 50 Pro - (07-2023) The Scan 50 Pro from the French manufacturer INTERSCIENCE is a new generation of manual colony counters. Designed to optimize the ergonomics of microbiology laboratories, it improves the technician's posture, protects the operator's vision and guarantees full data traceability Auction-ID: A1-49883-88
Type: S-D Variant: UM11 Version: 4BACE3C4PBR4 First registration date: 04/04/2013 Fuel: Gasoline Displacement: 1,229 cc (1.2 L) Power: 51 kW, or about 70 hp Fiscal power: about 4 HP Number of cylinders: 4 Transmission: manual, 5-speed Transmission: Front Wheel Drive Number of seats: 4 Body: Hatchback, 3-door Colour indicated on the papers: brown Environmental standard: Euro 5 CO₂ emissions: 118 g/km Top speed: 165 km/h Operating weight: 1,199 kg Maximum technically permissible mass: 1,470 kg Registration Number: 1EWE356 Papers : Belgian Technical inspection The check indicates that the vehicle complies with the technical regulations. Date of inspection: 13/03/2025 Validity: until 04/04/2026 Reported defects: Miner to be repaired: rear fog lights – faulty light source. Minor to watch for: high beam – orientation of a lighthouse ou ...
Defect on screen: maintenance to be expected Type: FML4 Variant: XU51 Year: 2019 1st registration: 08/11/2019 Mileage: 92,764 km Fuel: Gasoline Displacement: 1,499 cc – 1.5 L Engine: 3-cylinder in-line Power: 75 kW / approx. 102 hp Transmission: Manual, 6-speed Transmission: Front Wheel Drive Number of places: 5 Number of doors: 5 Environmental standard: Euro 6 CO₂: 150 g/km according to the value indicated on the certificate of conformity Maximum speed: 192 km/h Operating weight: 1,270 kg Maximum authorised weight: 1,680 kg Length: 3,982 mm Width: 1,727 mm Height: 1,425 mm Wheelbase: 2,567 mm Documents: Belgian registration certificate + CE certificate of conformity Country of registration: Belgium Technical inspection: favourable Validity of the technical inspection: until 22/04/2026 Auction-ID: A3-46159-35163
Brand: Audi Model: Q3 First put into circulation: 28/06/2012 Mileage: 284,601 km Fuel: Diesel Displacement: 1,968 cc – 2.0 L Power: 100 kW – approx. 136 hp Euro Standard: Euro 5 CO₂ emissions: 137 g/km Transmission: Manual, 6-speed Number of places: 5 Colour shown: Blue Operating weight: 1,520 kg Maximum authorised weight: 2,045 kg Maximum indicated speed: 197 km/h Tyres indicated: 215/65 R16 98V Papers: Belgian Visible technical inspection The technical inspection document presented dates from 01/12/2022 and indicated a limited validity until 16/12/2022, with mandatory representation. Defects then mentioned: Non-compliant tire tread depth Warning of the restraint system/airbag reported Defective or missing license plate lighting Particulate emissions to watch out for Auction-ID: A3-46159-35173
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-50065-344
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-50208-297
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-50066-344
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50066-335
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50065-384
Sold without shelves. Composition: Flanged lid valves, steam traps, in-line filter, graphite seals Identified brands: GESTRA, ARMSTRONG Auction-ID: A1-49997-146
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50208-58
Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-82
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50065-335
With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50208-168
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50066-384
Reading 0.5 HR. Ball and diamond indenter. N.5 setting blocks (3xHRC, HRBW, HRA). Max measurable height when the lead screw protector is added 100 mm, without a lead screw cover 170 mm. Measurement depth 135 mm. Durometer dimensions 185 x 465 x 640 mm. Measuring force: 588,4 N (60 Kgf) /980,7 (100 Kgf) /1471 N (150 Kgf). Machine condition: unchecked. Approx. Transport dimension: LxWxH 530 x 400 x 750 mm; Approx. Weight: 82kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50212-36
Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-50208-67
Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator
Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function
maximum number of results exceeded
please refine your search
200 € 
