press brake machine used for sale

Pressure 100 t Stroke 220 mm Clear width between uprights 1190 mm Installation height 700 mm Cylinder diameter 190 mm Piston diameter 120 mm Table surface 1600 x 800 mm Machine weight approx. 1.3 t Dimensions approx. 1.9 x 1.4 x 2.0 m Auction-ID: A7-46460-478

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-43525-539

Professional industrial screw compressor from Air Krone / Bottarini, type KS10, mounted on horizontal pressure vessel and equipped with integrated refrigeration dryer. Suitable for continuous use in workshop, industry and woodworking. Machine is in used condition but has been tested in working order. Display active and compressor builds pressure - Compressor type: screw compressor, Maximum pressure: 10 bar - Capacity / output: Compressor: 900 L/min, Refrigeration dryer: 1100 L/min - Power: 7.5 kW - Voltage: 400V - Current: 16A - 3-phase power current - Weight: approx. 298 kg - Integrated air dryer present - Horizontal pressure vessel integrated - Electronic control/display - Working pressure visible on display & video Auction-ID: A3-43525-10914

eccentric press Type: LE 250 P Manufacturer: VSS Year: 2008 Pressing force: 250 t Stroke: 30-140 mm Max number of strokes: 45/min Slide adjustment: 110 mm Worktable dimensions: 1120 x 800 mm Ram dimensions: 800 x 475mm Machine weight: 13000 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

CONTROLS    PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: no   feedstock transport direction: left to right SLIDE   total force (nominal): 400 to   stroke: 230 mm   stroke rate (max.): 35 /min SLIDE (HYDR. PRESS)   approximation velocity max.: 120 mm/s   working velocity min.: 5 mm/s   working velocity max.: 50 mm/s   return velocity max.: 135 mm/s COUNTER RAM   nominal force: 100 to   stroke: 40 mm V-RING   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1050 mm   lower table (front-back): 800 mm   upper table (left-right): 800 mm   upper table (front-back): 800 mm   shut height max.: 410 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 350 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   fee ...

We are selling a complete used strip processing line consisting of 6 machines offered together as a fully automated coil-to-press production system.Machines 1 to 3 form a strip processing unit with a shared control cabinet and hydraulic system with a total power of 35 kW. Common Material Specifications • Material grades: St 37, St 52, bright and galvanised • Material thickness: 1.0 mm to 6.0 mm • Material width: 50 mm to 500 mm • Maximum material cross-section: 1500 mm2 Machine 1 • Type: decoiler with expanding mandrel • Manufacturer: ARKU • Model: AH 5000/600/MSG-4Q • Year of manufacture: 2002 • Condition: used, operational, very good • Maximum coil weight: 5 tonnes • Maximum coil diameter: 2000 mm • Expanding range: 470 mm to 530 mm • Weight: 5500 kg • Special features: hydraulically driven expanding mandrel, pressure arm, and roller Machine ...

230 volts, 1800 watts, 140 bar max, 5.5L/min Auction-ID: A1-40418-141

R410A refrigerant Quantity 6.3 kg Power 14 kw DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-22

DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-4

Slide size 900x700 mm Slide stroke 600 mm Opening between the posts 800 mm Worktop size 900x700 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-16

Slide size 1220x1070 mm Slide stroke 400 mm Shots per minute 15 Opening between the uprights 1270x450 mm Worktop size 1220x1070 mm REEL Max reel width 500 mm RECTIFIER Max belt width 500 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-2

Slide size 1100x750 mm Slide stroke 200 mm Strokes per minute 10 - 50 Max mould height 570 mm Worktop size 1300x800 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-15

230 volts, 1800 watts, 140 bar max, 5.5L/min Auction-ID: A1-40418-260

Slide size 850x600 mm Slide stroke 14-180 mm Strokes per minute 40 Min height between table and slide 500 mm Worktop size 1300x800 mm Revamping of the electrical system 2007 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-9

Slide size 1600x1200 mm Slide stroke 800 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1200 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-14

Equipped with working pressure: 195bar – 19.5Mpa; Maximum pressure: 200bar – 20Mpa; Capacity: 900 l/h – 15 l/min; Maximum temperature: 140°C - 284°F; burner power: 48.1 kW; motor power: 5.5 kW; Power supply: 400V/50Hz; fuel: diesel; weight: 118kg; Unused (115x74x105cm transport size) Auction-ID: A1-40137-359

Slide size 475x130 mm Slide stroke 100 mm Shots per minute 10-50 Max mould height 400 mm Worktop size 800x570 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-6

Slide size 1000x800 mm Slide stroke 100 mm Strokes per minute 40-100 Opening between uprights 520x260 mm Worktop size 1000x800 mm REEL Max reel width 600 mm RECTIFIER Max belt width 500 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-1

Slide size 650x450 mm Slide stroke 20-140 mm Strokes per minute 40-80 Max mould height 400 mm Worktop size 1000x660 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-7

Slide size 1600x1300 mm Slide stroke 900 mm Opening between the posts 1400 mm Worktop size 1600x1300 mm Max mold size 1600x1300 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-13

Cooling power 29.3 kw Refrigerant temperature -10 / 85 Refrigerant R407C Quantity 9.2 kg DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-18

max 3500 PSI, 7 hp petrol engine, unused Auction-ID: A1-40418-94

Slide size 1850x1200 mm Slide stroke 460 mm Shots per minute 15-30 Opening between the uprights 1900 x1000 mm Worktop size 1850x1200 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-12

Slide size 810x610 mm Slide stroke 550 mm Worktop size 810x610 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-17

Still in operation, a maximum of 10 operating hours can be added Here is the compact overview of the most important technical data for the mütek MPP 80: FeatureSpecificationThroughputup to 80 kg/h (depending on material) Briquette diameter80 mm (standard) Engine power5.5 kW (hydraulic drive) Silo volumeapprox. 1.0 m³ (standard with agitator) Material moisturemax. 18 % Atro Material size< 20 mm (granules/chips) Dimensions (LxWxH)approx. 1,850 x 1,450 x 1,450 mm Weightapprox. 850 kg Power connection 400 V / 50 Hz / 3 phases Special feature: The machine has an oil shortage switch as standard to protect the hydraulic pump when the oil level is too low. Auction-ID: A1-46501-519

Slide size 1520x1070 mm Slide stroke 254 mm Strokes per minute 30 Opening between the uprights 1570x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2016 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-8

Slide size 385x350 mm Slide stroke 80 mm Max opening between table and slide 350 mm Worktop size 800x520 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-10

Complete overhauled Amandus Kahl pellet press. The C35-780 pellet press itself has recently been overhauled; Full documentation of all new parts is available, one of which can be seen in the photos. The last 2 pictures of the Amandus Kahl pellet press in the factory were taken before overhauling and disassembling for sale. Specifications: Brand and type: Amandus Kahl C35-780 pellet press Amandus Kahl C35-780 pellet press with 110 kW electric motor Specifications: Brand/type: Amandus Kahl C35-780 Version: pellet press with base plate Motor power: 110 kW Year engine: 2024 Engine condition: virtually unused Press components overhaul year: 2024 Sawdust capacity: 2.5 – 3 tons/hour Biomass capacity: 3 tons/hour Bran capacity: 3.5 – 4 tons/hour Straw capacity: 2 – 2.5 tons/hour Features: New 110 kW electric motor Electric control cabinet with emergency stop Full elec ...

Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-5

Slide size 1520x1070 mm Slide stroke 254 mm Shots per minute 36 Opening between the uprights 1520x560 mm Worktop size 1520x1070 mm Revamping of the electrical system 2006 DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-11

Technical details Type: Industrial fastening components (clamping bolts / tie rods) Configuration: Heavy-duty threaded rods with hex heads Quantity: Approx. 18–25 pieces Thread size: Estimated M24 – M42 (metric coarse) Length range: Approx. 300–700 mm Material: High-strength steel (industrial grade, approx. 8.8–10.9 equivalent) Design features: - Long cylindrical load-bearing shanks - Hex heads for high-torque tightening - Some stepped/shouldered sections for alignment Application: Tool clamping, die fixing, press fastening, and heavy fixture mounting Dimensions and weight (approx.) Length: 500 mm (average) Width: 60 mm Height: 60 mm Weight: 250–400 kg (total) Auction-ID: A7-46498-130

General description Set of 2 manual industrial presses suitable for light pressing, riveting, assembly, and small stamping operations. Compact and robust units for workshop use. Technical details Type: Manual presses (arbor / toggle type) Quantity: 2 units Operation: Hand-operated lever system Configuration: - 1x vertical arbor press (simple design) - 1x adjustable press with geared head and return spring Capacity: Estimated 0.5 – 2 tons Construction: Cast iron body Mounting: Bench or floor-mounted base Application: Pressing, riveting, bearing insertion, light punching and assembly tasks Equipment - Vertical rams - Hand levers - Flat die/work surfaces - Adjustable head mechanism (on one unit) Condition and remarks Used machines. Show typical wear from workshop use. Structurally robust and suitable for continued operation. Sold as a set. No electrical component ...

PRESSURE UNIT KARCHER Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1015

MÜLLER CT16.4.1 – Hydraulic Press General data: Manufacturer: Müller Model: CT16.4.1 Machine number: 221 094 A110 Year of manufacture: 1991 Machine type: Hydraulic press Technical details: Pressing force: 16 tons Description: Compact hydraulic press MÜLLER CT16.4.1 designed for pressing, forming, and assembly operations. Suitable for workshop and industrial applications requiring controlled pressing force and reliable operation. Auction-ID: A7-46498-107

Technical details Type: Industrial tooling components (fixture blocks / die holders) Configuration: Cast metal blocks with flange geometry Quantity: 5 units Design: - Oval/rectangular flange shapes - Central bores (single and double configurations) - Multiple bolt holes for mounting Material: Cast iron or cast steel Construction: Thick-walled, designed for high mechanical and thermal loads Application: Fixture bases, die holders, mould supports, or furnace/press tooling Load capability: Suitable for high-temperature and high-stress environments Dimensions and weight (approx.) Length: 300 mm Width: 200 mm Height: 120 mm Weight: 120 kg (total) Auction-ID: A7-46498-129

HYDROSTATIK HFM610 – Hydraulic Press General data: Manufacturer: Hydrostatik Franz Mertl Model: HFM610 Machine number: 6562 Year of manufacture: 1988 Machine type: Hydraulic press Technical details: Pressing force: 10 tons Stroke: 400 mm Operating pressure: 200 bar Drive power: 5.5 kW Description: Hydraulic press HYDROSTATIK HFM610 designed for pressing, forming, and assembly operations. The machine offers controlled force application and a long stroke, making it suitable for workshop and industrial applications. Auction-ID: A7-46498-117

MÜLLER T6.3.3.14 – Hydraulic Press General data: Manufacturer: Müller Model: T6.3.3.14 Machine number: 9157 Year of manufacture: 1976 Conversion: Updated according to UVV 11.064 (07/1992) Machine type: Hydraulic press Technical details: Pressing force: 8 tons Description: Compact hydraulic press MÜLLER T6.3.3.14 designed for pressing, forming, and assembly operations. The machine has been upgraded to comply with safety regulations and is suitable for workshop and industrial applications requiring controlled pressing force. MÜLLER T6.3.3.14 – Hydraulic Press General data: Manufacturer: Müller Model: T6.3.3.14 Machine number: 9157 Year of manufacture: 1976 Conversion: Updated according to UVV 11.064 (07/1992) Machine type: Hydraulic press Technical details: Pressing force: 8 tons Description: Compact hydraulic press MÜLLER T6.3.3.14 designed fo ...

Technical details Manufacturer: Gebrüder Röcher Maschinenbau (Germany) Model: REP 20.02 N Year: 1982 Type: Hydraulic press (vertical) Press force: 200 kN (approx. 20 tons) Stroke: 450 mm Working speed: Approx. 31 mm/s Approach speed: Approx. 276 mm/s Return speed: Approx. 335 mm/s Motor power: 7.5 kW Voltage: 380 V / 50 Hz Fuse rating: 35 A Control: Manual control station (pendant) with emergency stop System: Hydraulic drive with integrated control cabinet Application: Forming, pressing, punching, and assembly operations Dimensions and weight (approx.) Length: 2000 mm Width: 1200 mm Height: 2500 mm Weight: 1500 kg Auction-ID: A7-46498-165

HYDROSTATIK HFM406 – Hydraulic Press General data: Manufacturer: Hydrostatik Franz Mertl Model: HFM406 Machine number: 4589 Year of manufacture: 1979 Conversion: Updated according to UVV 11.064 (06/1992) Machine type: Hydraulic press Technical details: Pressing force: 6 tons Stroke: 300 mm Operating pressure: 120 bar Power consumption: 3.0 kW Voltage: 380 V Description: Hydraulic press HYDROSTATIK HFM406 designed for pressing, forming, and assembly operations. The machine has been upgraded to comply with safety regulations and offers reliable performance for workshop and industrial applications. Auction-ID: A7-46498-119

Professional pressotherapy system designed for lymphatic drainage and body treatments. Includes full body compression suit with multiple air chambers for legs, abdomen and arms. Equipped with adjustable pressure programs and control panel for customized treatments. Suitable for improving circulation, reducing fluid retention and aesthetic body treatments. Auction-ID: A1-46551-4

Block gluing press EMMES EPP 200 pneumatic Maximum gluing length 2000 mm Gluing height 1500mm Foot width 100mm Number of vertical clamps 6 Number of frontal clamps 3

OCEM 1440 ES complete production Year of production 2014

Screw Press Dewatering Press Sludge Press Screw Separator Used Manufacturer: IMC with 2 counter-rotating parallel screws Screw diameter approx. 150 mm Screws and sieves made of brass, residual steel Insertion funnel approx. 400 x 500 mm Drive via V-belt and gearbox approx. 60 rpm Engine: 2.2 kW 940 rpm 220/380 V Total dimensions: approx. 2300 x 700 x 1750 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Excellent condition - Fully operational - Loading / Transport possible! - nominal force: 500 kN - Max. eccentric load: 80 kN - Max. bending length: 2000 mm - table length: 2000 mm - table width: 60 mm - table height: 965 mm - Passage between pressing beams: 370 mm - stroke: 100 mm - Jib length: 400 mm - distance between columns: 1690 mm - Max. pressure: 31.6 Mpa - number of cylinders: 1 - oil capacity: 45 L - Motor power: 6 kW - Max. Delivery Speed: 79 mm/sec - Max. working speed: 10 mm/sec - Max. Return Stroke Speed: 80 mm/sec

Slide Dimensions X-Y (mm) 450 x 300 Stroke (mm) 400 Strokes type fixed Stroke per minute 150 Features no extractor cylinder Screw diameter 200 mm

max. working pressure: 170 bar; Temperature range min.: 0 °C; Temperature range max.: 60 °C; capacity: 540 l/hr; mobile: yes; power: 5.14 kW; unused in box; with various accessories; 3902; Auction-ID: A1-46415-525

crimping range 15-63mm; max opening 75mm; pressure 53.5 Mpa; force 500 T; 3000W; 380V; 5585 Auction-ID: A1-46415-347

Defects: air leakage (upper frame); incomplete cycle; oil leakage on hydraulic cylinders; machine not operated for ~6 years; further faults possible; sold for repair/parts Auction-ID: A7-40553-25

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-730

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-729