130,396 used machines on RESALE, but how to find them? Machine Search
Telemecanique - Batch of pressure switches, rail-mount terminals and safety components Condition: unused QTY: XMLBL05R2S12EX 11x QTY: AB1VVN1635U 3x QTY: ZB2-BV185 16x QTY: XUSL4E2BB051L 4x Auction-ID: A1-46070-123
RODCRAFT WP100P workshop press ; hydraulic pneumatic and manual with 2 speeds ; suitable for pressing, straightening and assembly work ; Capacity: 100 tons; Air pressure: 7.5 – 8.5 bar ; Cylinder stroke: 300 mm ; Inner frame width: 787 mm ; Drevelset: yes ; Weight approx. 800 kg; Aged model Auction-ID: A1-45170-8
Voltage: 380 volts ; Capacity: 60 TONS; Stroke length: 250 mm ; Width: 570 mm ; Auction-ID: A1-45170-12
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 2200 mm table surface (front-back): 1700 mm SLIDE stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6536 mm space requirements -front/back-: 2923 mm total height: 6135 mm total weight approx.: 36000 kg
Automatic complete impregnation system IWT, B.J 2002. Diameter 1.8 m. Length 18 m. Impregnation including impregnating agent container. Including all pumps. System can be set at an angle, inlet on both sides.
Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.
Capacity, ton 1000 Course stroke, mm 170 Number of strokes per minute 32 Shut height, mm 470 Table size, mm 800 x 800 Weight, kg 26000 The presses are in working condition. Complete
Used belt press for fruit by Klein type FP 2. New 1986. Modernised with the addition of inverter-controlled geared motors. Comes with water filters for cleaning the filter nets. Plus juice and circulating water pumps. Set with 3 pcs.
With patented MULTIFORCE hub connection system!, The punching press automatically adjusts the cutting force to the size of the punch tool., It does not matter how resistant or thick the material to be cut is., Cutting table: 1,000 x 500 mm, Reach: 370 mm, Maximum cutting capacity: 25 t – 245 kN, Dimensions: 1.000 x 1.140 x 1.710, Net weight (with oil): 1.020 kg
used bread press Record Erika Automat Classic Q2 30 pcs, checked, with knitted plates, for 30 pieces, weight range from 25 to 120 g, mesh no. A110311, 1.5 kW, 3.8 A, 380 V, 50 Hz
\" mixed lot of gas struts / gas pressure cylinders for tool and mold making. It mainly contains branded components from FIBRO, plus Bordignon (High Performance Line) and other identical designs. The parts come from stock, mostly unused, partly with traces of storage or use. Several cylinders are still packed protected (net / bag). Scope of delivery • complete lot as shown • approx. 38 pieces of gas struts / cylinders (according to the marking) • incl. protective packaging • no individual sale • Manufacturer: FIBRO, Bordignon • Type: Gas Pressure Spring / Gas Pressure Cylinder • Filling Pressure: • 150 bar • 180 bar • Spring Forces (depending on model): • e.g. 350 daN • 550 daN • 750 daN • Versions: • Various diameters and lengths • Short and long designs • Article/order numbers include: • FIBRO 2480.12.03000 • FIBRO 2487.12.00350.063 • FIBRO 2 ...
As good as new machine Operating hours in motion: 29.5 Hour meter: 2244 Strokes: 159328 incl. interchangeable decoiling device, strip straightener and Scrap ejection. Mains voltage: 3LNPE/400V/50Hz Control: Beckhoff/PNOZ multi Electrical wiring diagram: E$-M02070 Pre-fuse: 160 A Nominal power: 37 KW Nominal force: 2000 KN Working capacity: 16000 J Stroke rate in continuous stroke: 30-150 min-1 Max. stroke rate in single stroke: 30 min-1 Max. clutch cycles in single stroke: 20 per min Runtime: 0.158 s Min. safety distance: 317 mm Clutch pressure: 5.0 bar System pressure: 6.0 bar Stroke length: 20-220 mm Max. plunger adjustment: 150 mm Usual stopping point of the ram: OU Table dimensions: 1800x1100 Plunger dimension, max. tool dimension (WxD): 1800x1100 mm Max. weight tool top: 1700 kg Mass without additional equipment: 29000 kg Auction-ID: A1-46003-1
Manufacturer: Hydrap Model: HPSK 80 Year of Manufacture: 1994 Type of Machine : Hydraulic Press Condition: Used Operating hours: 27,436 h Press Performance - Nominal force: 800 kN - Maximum ram stroke: 300 mm - Overrun distance: 30 mm - Overrun time: 120 ms - Safety distance: 196 mm - Drive type: Hydraulic - Press orientation: Vertical - Number of cylinders: 1 - Cylinder diameter: 210 mm Working Area - Throat depth to ram centre: 250 mm - Minimum daylight table to ram: 500 mm - Clamping table length: 700 mm - Clamping table width: 500 mm - T-slots to DIN: 650 mm - Slot width: 22 mm - Slot arrangement: Diagonal - Clamping plate thickness: 150 mm Electrical Data - Voltage: 400 V - Frequency: 50 Hz - Current type: DC - Drive power: 22 kW - Rated current: 45 A - Mechanical Data - Weight: 6.5 tonnes - Oil viscosity: HLP 46 - Oil quantity: 485 litres Find more here - / Contact us ...
Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data: Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...
CONTROLS conventional PRESS FORCES total force (nominal): 75 to PRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 1110 mm SLIDE table surface (left-right): 960 mm table surface (front-back): 750 mm SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 120 /min stroke rate (max.): 600 /min STRIP-FEEDER feeder type: roll feeder sheet width max.: 300 mm ELECTRICAL SPECIFICATIONS total power consumption: 15.5 kW DIMENSIONS / WEIGHTS total weight approx.: 13500 kg ATTACHMENTS (PRESSES) strip feeder: yes feeder type: roll feeder
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg
Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton
Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton
Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
Veneer press BÜRKLE U 80 -used-emergency-stop-line, control by button---------- Technical data ----------pressing surface: 2,550x1,300 mm, power per heating plate: 9100 W, max. opening height: 4000 mm, number of cylinders: 6 pieces, dimensions LxWxH: 3,150 x 1,450x1,785 mm, weight: 3700 kg
Wood briquetting press Amis ABP 60 L-exhibition machine----------- Technical data ----------briquette: 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg- Easiest handling- Hydraulic control- Briquette diameter 60 mm- Briquette length adjustable as desired (max. 60 mm)- Motor equipped with motor protection switch and emergency stop- No electronic components such as regulators, Sensors and sensors or complicated controls - Large
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-5
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-52
Used for applying heat and pressure to bond or process materials. Auction-ID: A7-46462-49
Pressotherapy 3-in-1 is an advanced cosmetic and medical device that combines three different technologies in a single treatment, offering comprehensive body care. The device includes: lymphatic drainage (pressotherapy), infrared (IR), and electrostimulation (EMS). Auction-ID: A7-46406-12
Hydraulic and pneumatic sole attaching press. Auction-ID: A7-46462-5
Thermal adhesive activator Auction-ID: A7-46462-4
Cabinet 1020x570x1000 Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-9
According to photos, machine is no longer connected to the power and the liquids are emptied for transport. Documents are available electronically Auction-ID: A1-45666-5
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-50
According to photos, without tools, weight estimated Auction-ID: A1-45666-2
According to photos, without tools in the press, these are still being removed, machine is running and is on power Auction-ID: A1-45666-1
2 - the black and white Auction-ID: A7-46462-51
Used for applying heat and pressure to bond or process materials. Auction-ID: A7-46462-18
Sold with 3 tool cabinets (2 x 50/100/190 cm and 1 x 90/100/190 cm) with contents. Auction-ID: A1-46437-189
A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.
A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible.
Manufacturer: Presona Model: LP50EH2ECC Year of Manufacture: 2021 Type of Machine : Baler Year of commissioning: 2022 Pressing force: 500 kN Pressure: 25 MPa Certification: CE marked Control System - PREMI 50 The machine is equipped with a PREMI 50 PLC control unit featuring a 7 inch colour touchscreen. It allows full parameter settings for the press and displays production data for up to 15 press programs. The PREMI 50 includes an internet interface for remote monitoring,diagnostics, and production data access via a secure internet connection from any computer. Find more here - / Contact us at -
A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible.
Briquetting press Reinbold RB 50 SV – Top condition, ready for immediate use! Only 410 hours of running. For sale is a high-quality briquetting press from Reinbold Entsorgungstechnik GmbH – ideal for woodworking, carpentry or industrial operations, the machine is immediately ready for use. Technical data: Model: RB 50 SV Motor: 5.5 kW Voltage: 400 V (high current) Current: 16 A Frequency: 50 Hz Briquette diameter: 60 mm Hydraulic pressure: 160 bar Highlights: ✔ Robust industrial quality ✔ Reliable & durable technology ✔ Easy to use ✔ Space-saving design ✔ Saves disposal costs ✔ Produces usable fuel briquettes For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively inspected before sale to ensure reliability. The satisfaction of our customers is our top priority. You are welcome to visit and ...
- Closed press basket, steel, coated - Tank capacity: 30hl - Last use: 2025 harvest - Membrane: PVC, 2018 - Juice pan : Large stainless steel tub, Version «Drawer with suspension, connection DIN - DN50 - Central filling - Without feet, with wheels - Machine in working condition Dimensions: - Length: 4500 mm - Width: 1900 mm - Height: 1600 mm (without wheels)
maximum number of results exceeded
please refine your search
50 € 
