126,674 used machines on RESALE, but how to find them? Machine Search
Stock number: U2391 Used rotary tablet press by Killian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included.
Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.
Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3700 mm - Width: 1800 mm - Height: 2450 mm - Weight: 7000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type ...
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2500 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamp ...
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2760 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-actio ...
used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2011 Machine no.: 407.00.360 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
Auction-ID: A3-43515-21059
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.016 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.024 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200
Unused product. Auction-ID: A1-40135-79
Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...
Fogg &Young C Frame Press 3400mm wide Upstroking 3x heating zones Eurotherm controllers
used cabinet press Manufacturer: HSM Type: VL 155.2 Year of construction: 2006 Machine No.: 6114.144. Series No.: 270174730 U specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm
ZTS KOSICE LEK 160 eccentric press was built in 1984 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is used in cold metal forming. It is capable of performing operations such as precise punching, stamping and bending. All these machining processes are performed with a high press force of 160 tonnes, which, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 32 and 50 strokes per minute and its stroke is adjustable in the range from 25 mm to 160 mm. The ZTS KOSICE LEK 160 is also distinguished by its very rigid C-shaped design, which offers excellent process stability during even the most intensive challenges. The work table with a length of 1000 mm and a width of 740 mm enables mounting of both larger workpieces and tools. All this makes the offered LEK 160 eccentric press an excellent choice for the producti ...
\"Diameter: 800 mm Boiler height: 900 mm\" On pallet Auction-ID: A7-45983-30
I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.
Max. 10bar Diameter: approx. 800mm Height: 2400mm Auction-ID: A7-45983-129
High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller
Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...
Used briquetting press Manufacturer: Höcker Polytechnik Type: C30-12 Year of construction: 02/2003 specifications: Pressing capacity: up to approx. 30 kg/h (depending on material) Hydraulic motor power: 3.0 kW VBriquette diameter: 65 mm Residual moisture: max. 18 % Operating time (without cooler) max. 6-7 h Operating pressure: max. 180 bar Operating temperature hydraulic oil max. 60°C Working environment +5°C to +35 °C Machine weight: approx. 760 kg Container capacity: approx. 0.8 m³ Gearbox agitator: 0.37 kW Space requirement: 1,350 x 1,510 x 1,300 mm (L x W x H) -without pedestal Platform dimensions: 2,350 x 2,550 mm
Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block
The DIXI 18S is a vertical baler for paper, cardboard and films that is suitable for small to medium quantities. It works with a pressing force of 18 t, has a filling opening of 1,070 x 620 mm and produces bales weighing around 120 to 180 kg. [youtube +1] Features • Compact design with a small footprint. [lenox-trading +1] • Two-stage hydraulics for fast pressing cycles. [youtube +1] • Automatic bale ejection for easy handling. [lenox-trading +1] • Suitable for cardboard, paper and also foil. [scribd +1] Technical brief data • Motor power: 4 kW. [Used Machines +1] • Connection: 400 V / 50 Hz.[balers +1] • Press force: max. 180 kN, i.e. about 18 t.[used machines +1] • Cycle time: approx. 22 seconds, pressing time: approx. 12 seconds. [Balers +1] • External dimensions: approx. 1,520 x 950 x 1,970 mm.[used machines +1] Suitable use The baler is often used in c ...
Mobile plasticizer for pressing processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulic PN: 150 bar Pn: 16.5 kW P Heating:8 kW 400 V Single STW 150/1-3-10-K Temperature control unit 3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
Extensive retrofit 2018/2019, approx. 500,000 € Connected load: 40kW. Air pressure required: 6 bar. Control modernization with the following scope: - Renew the control cabinet - Replace the main control panel - Replace the terminal boxes - Replace the servo drive of the C and Y axes - Modernize the feeder and the alignment station - And renew the wiring of the machine Expenses for the control system conversion: Electr. Circumference of punch 1. Punch 2 and Linear Automatic Control - PLC control Siemens S7 - Security technology and standard automation integrated into an overall system - Safety-related communication easily via standard fieldbuses - Simple and practical handling, thus high acceptance by the operating personnel - Effective, fast diagnostic functions, for maximum availability of machines and systems - NC sequence control Siemens SIMOTION - Servo drives Sinamics drive syst ...
Key data: 300 t
DURENDUS 300 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 22.450 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement ...
Key data: 400 t
DURENDUS 400 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 35.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...
Key data: 500 t
DURENDUS 500 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 46.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...
Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg
Hydraulic tire separator press type SEDA T-REC XXL. For quick separation of tire and rim. Also ideal for alloy rims.
maximum number of results exceeded
please refine your search
50 € 
