press brake machine used for sale

Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was  ...

Output (caps/min): 1500

In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

Rotation tablet press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 400 Number of stations (Max.) D=30 B=36 BB=45 1 Max tablet ejection/hour T/h 125000 170 000 215 000 2 Max.Tab.Diameter Round mm 13 16 25 Mould mm 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 5 Max pre-press force t 2 Hqgonxsno 6 Dimensions mm 1000 x 1230 x 2000

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.

Stainless steel pedestal for bread presses / dough-sharing machines suitable for all common bread presses massive construction resilient with 1 to easy lifting with the lift truck Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Visit our large bakery machinery warehouse!

In the pipeline: Baler Dixi 60 SLS, year of manufacture 2013 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

Bread Press Fortuna Automatic A 3 H + Dough dividing and rounding machine Bread Press TOP Model Fortuna Automat Gr. 3+ with active shutdown Intervention protection with protective corners Head cleaning to the rear electrically Part head with stainless steel knife Dough insert up to 2400g depending on TA Dough divider with 3 knitting plates Connection 400V,16A-CEE plug Dimensions: 720 x 800 x 1510 mm WxDxH Used machine + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Cast Plate Service Package Maintenance contract E-Box for more safety Delivery Instruction & Commissioning

Exhibition machine MOVE - the high-precision vacuum press with a gigantic usable surface for vacuum form gluing and vacuum veneering of bent workpieces. With total flexibility, due to total mobility and revolutionary folding mechanism, to reduce the footprint to 45% when folded. High-precision vacuum press with flap opening incl. ⦁ Revolutionary folding mechanism (reduction of the footprint to 45%) ⦁ 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) optional, automatic shutdown when pressure is reached (with large vacuum volume) ⦁ Pressure regulation 400 to 900 mbar, analog vacuum pressure display ⦁ Highly elastic natural rubber membrane (up to +130 °C) ⦁ Diaphragm quick-change system ⦁ Stable phenolic resin worktop (up to +160 °C) ⦁ Gas pressure damper for flap opening ⦁ Vacuum pressure display ⦁ Connection for external vacuum bag ⦁ Smo ...

ManuMatik / KraussMaffei High Pressure Cylinders The high-pressure cylinders come from a commutator press and were used there until the end. Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are also installed Check Valves z2S16-1-51 Pressure Reducing Valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x pressing unit Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

M. No.: 121

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

Vertical baler HSM VL 600, built in 2002 Specifications: Manufacturer: HSM Type: HSM VL 600 Year of Make: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: paper, cardboard, foil Remark: The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

Key data: 40 t, 1030 mm

For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...

In the pipeline Baler Dixi 60 SLD, built in 2016 Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SLD Year of Make: 2016 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

In the pipeline Baler Dixi 60 SLD, built in 2012 Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SLD Year of Make: 2012 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

In the pipeline Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2021 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cardboard The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex w ...

with 130 filling valves and 26head crown corker Year of manufacturing: 1994 capacity: approx. 50.000 bph Control system to Siemens S7 - 02/2011 Reconstruction capper to crown cork and Twist off, both is possible without conversion of the capping elements

Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

OCEM OPA 650 – COMPLETE PLATE PRODUCTION LINE – Main Engine: · Brand: OCEM · Model: OPA 650 · Year of manufacture: 2005 (complete overhaul in 2011) · Pressing force: 300 TON · Mold sets: 30 x 30 cm; 33 x 33 cm; 40 x 40 cm; 40 x 60 cm · Production capacity: approx. 300 m² / 8 h · Rubber sets: available in different sizes · Pre-concrete feeders, rear concrete wagons · Recirculation system for residual concrete · Electrical control cabinet, hydraulics, pneumatics Vertical Removal Robot · Pallets: over 300 pieces Additional equipment: · CASSANI sandblasting machine, belt width 60 cm · VISMAR Exposed Concrete Washing Machine / 4-Head Grinding Machine (3+1) Complete pre-concrete preparation unit: · Day silos, mixers, weighing belts, etc. OCEM OPA 650 Complete prod ...

Falch Trailjet 15 Pressure Washer 500bar , 95 °C Mint condition - Manufacturer: Falch - Type: Trail Jet 15 - Registration date 07/21 - Working pressure: 500bar - Volume flow: 15 l/min - Cold and hot water up to 95 °C - Operating hours: approx. 481 h - German papers Accessories: - Optional Price excluding VAT! Net price: 32.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in. CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more.

Falch T3H Pressure Washer 300bar, 98 °C - Manufacturer: Falch - Type: T3 H - Year: 2008 - Working pressure: 300 bar - Volume flow: 21 l/min - Generator: 230 V - Cold and hot water up to 98 °C - Operating hours: approx. 3158 h - New HD pump Accessories: - Optional Price excluding VAT! Net price: 19.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scatee - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in.

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

press is after overhaul: full function complete mechanical parts, pneumatic and control system. The press has a new pneumatic clutch, the original was electromagnetic clutch as old system. Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

For sale is a used pelleting line that has been pelletizing wood fiber-based fertilizer with cattle manure and digestate for the past four years (approximately 5,000 hours total). It incorporates components from various well-known manufacturers, including the Amandus KAHL pellet press/continuous mixer, Bühler hammer mill/conditioner, CPM pellet cooler, Wynveen pellet screen, and Rako/Apullma conveying technology. Capacity: 1. Wood chips with dried cattle manure: approx. 1.5 t/h 2. Dried, separated compost/dried digestate: approx. 2.5 t/h 3. According to the manufacturer, KAHL, the press can process up to 3 t/h of biomass. The customer is now restructuring their operations, making this line available for sale. The preferred option is to sell the entire line, but individual components can be purchased separately by arrangement. The customer is primarily seeking to sel ...

Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Pressing rollers Tranklein Model 600 Year 1980 Width 600 mm Available Direct

Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: paper, cardboard, foil The press is in good, working condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without ...

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...

Elegant effects for book covers and packaging For industrial embossing of solid grey board in bookbinding and in the further processing of fine packaging. The stabilized embossing head guarantees precise embossing even with non-centred embossing clichés. For blind, relief or film embossing of rigid, flexible and plastic cases at up to 80 cycles/min. The PE 312 processes the whole bandwidth of cover materials with blind, relief or film embossing. Can be adapted for optimal processing of different materials by stepless adjustment of temperature and embossing pressure and by adjusting embossing time in steps of 10 seconds. Matrix plate with hole grid for attaching embossing blocks. Save make-ready time by preparing the matrix plate offline. Application : • Blind, relief or hot foil stamping • Combination of micro-embossing and structure embossing Technical data : Hardcover 1 ...

pressure control valve, R6V10 595 W0 B1 220, Denison, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.