press brake machine used for sale

This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information.

General SKU364X914 MakeDMN Machinefabriek LocationBarneveld CEcheck TypeAL-175 DAI MZC Main Features MaterialStainless steel Motor0.55 KW Inlet diameter175 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter175 mm Rotor width200 mm Number of locks:8 Lock sizes80 x 80 mm Capacity5,5 l/rev. Inlet175 mm Inlet flange sizes300 mm Outlet175 mm Outlet flange sizes300 mm Installation height350 mm With motor0,55 kW, 220—242/380—420 volt, 1380 rpm Rotor speed14 rpm Air purged sealingscheck Information No.122625 Year of construction2012 Floorspace0,95x0,65 m Total height0,50 m Weight120 kgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU271S307 MakeDMN Westinghouse Machinefabriek (NL) TypeMALD200 1 No.990510 / 40821 Year of constructionunknown LocationBarneveld Main Features MaterialMild steel Motor0.55 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialMild steel Rotary valvecheck Rotor width260mm Number of locks:8 Lock sizes260x90x100mm Inletdia. 200mm Inlet flange sizesdia. 345mm stc 295mm Outletdia 200mm Outlet flange sizesdia. 345mm stc 295mm Installation height400mm With motor0,55 kW 230/400 Volt Rotor speed140 rpm Air purged sealingscheck Information Floorspace0,6x0,6 M Total height0,4 M Weight100 KgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU090W551 MakeBrabender Year of constructionunknown, With electric heating LocationBarneveld Main Features Motor6.5 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer (1x) Motor6,8 KW Variable speedcheck Speed± 5-120 Rpm Information Extra Specifications- With 7 interchangable measuring heads DiscountViscosity test machinesBrabenderDiscountPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU307S485 LocationBarneveld CEcheck MakeCampen Machinery A/S (DK) TypeAN 200500 Main Features MaterialStainless steel Motor5.5 KW Rotor240 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 240x400mm Inletdia. 40mm Outletdia. 45mm With jacketcheck Motor5,5 kW 400 volt With Monopumpcheck MaterialStainless steel Information No.02 03 350 Year of construction2002 Mounted on wheelscheck With switch(as is) Floorspace2,4x1,7 M Total height1,9 M Weight1000 Kg Extra SpecificationsIncludes a spare mono pump Foam mixersCampen Machinery A/SMixers > Foam mixersBrand > Campen Machinery A/S What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

USED TETRA PAK A1 TCA 200ML FILLING MACHINE FOR SALE YEAR 2013 VERSION 900v Item #: Usm-238 Category Tetra Pak A1 Used Tetra Pak A1 TCA 200ml Filling Machine For Sale. Year of manufacturing 2013c version 900v, speed 14000 packs per hour. Working hours 5920 Conversion to 65ml available.

Used Used Case Packer Machines TMG: Year: 2018 Condition: Good Used Case Packer Machines TMG Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections Case packer tmg Box closing machine tmg Code: JM 91 More details: https://bottlingscout.com

High tipping bucket 240 cm with Euro hitch, - Own weight: 793 kg, - HYDRAULIC CONNECTOR 1 Euro quick-release coupling ISO 12.5 M18x1.5 – Socket, - HYDRAULIC CONNECTOR 2 Euro quick-release coupling ISO 12.5 M18x1.5 – plug, - profiled sides to increase volume, - Volume: 2.28 m³, - Dig scraper strip HB500 150x16, - Scraper strip HB500 150x16 easy access to bolt lubrication, - tilt angle 109°

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

Henkovac T4 – Professional Vacuum Packaging Machine (2019), Reliable vacuum performance with robust build quality for food‑industry environments., The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products., Technical Specifications, - Model: Henkovac T4 (Tabletop), - Year: 2019 (design generation from this period), - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations, - Chamber Dimensions: approx. 530 × 590 × 460 mm, - Seal Bar Length: approx. 420 mm, - Weight: ~55 kg, - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request), Key Features, - High� ...

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

Rondo jumbolina machine Stainless, Jumbolina machine with twin cutting station, belt dimensions 5400mm x 640mm, variable speed, with various different cutting heads and blades, mobile, 3Ph

General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous Motor5,5 kW, 400 volt MaterialMild steel Information Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0.75 kW, 40 ...

Continue spiraalschroefmachine voor de productie van industriële schroeven. Spiraalvormige schoepen worden gevormd door een metalen strip onder druk door conische rollen te leiden. Maximale strookbreedte: 200 mm Maximale stripdikte: 11 mm spiraalrichting naar links of naar rechts optimale rolsnelheid: 80 tpm Spoelcapaciteit: 5 ton Gewicht van de machine: 12 ton vermogen: 75 pk Inclusief rolslijphulpstuk: hiermee kunnen de conische rollen opnieuw geslepen worden zonder ze uit de machine te hoeven verwijderen. Inclusief hydraulische guillotines: geschikt voor het doorsnijden van alle soorten vleugels. Standaard steek: de buitendiameter is gelijk aan de steekmaat. Korte spoed: de spoed is kleiner dan de buitendiameter. Lange spoed: de spoed is groter dan de buitendiameter. Lintvlucht: vergrote binnendiameter door gebruik van smal basismateriaal. Komvormige vliegwiel: het vliegwielblad staa ...

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2510 € : 150 mm : 150 x 2000 mm : 200 x 150 mm : 530 mm : 3.5 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 115 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 150X/2 with 2 speeds € 2.960,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2100 € : 75 mm : 75 x 2000 mm : 200 x 75 mm : 530 mm : 3 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 100 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 75X/2 with 2 speeds € 2.530,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: 385 x 700 mm Equipments: Max sheet size 700mm x 385mm Min sheet size 210mm x 140mm Min paper thickness 110mm Max paper weight 400gsm Speed 6000 (A4 creased and folded) Dimensions (L)2020mm (W)680mm (H)1265mm Power supply 240v 50/60hz Weight 190kg’s

Size: 0x0 Equipments: 2 spindles

General SKU349U858 MakeServolift LocationBarneveld CEcheck TypeHF 250 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information No.10815 Year of construction2003 With switchcheck Floorspace0,65x0,67 m Total height4 m Weight650 kgCatalysts & fillersFeed additivesPaper & otherLifting/tilting machinesSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes  ...

: gebraucht : 2016 : 9737 : prompt, Zwischenverkauf v : 9800 € : 1 : 8330 € : 2025 mm : 3 mm : 500 mm : 4 kW : 2500 mm : 1720 mm : 1200 mm : 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRITURATORE MONOLABERO LUNGHEZZA ROTORE 3000 DIAMETRO ROTORE 800 POTENZA MOTORE ELETTRICO 250 kW ORE LAVORO CIRCA 29000 GRIGLIE: 1 set foro tondo Ø 30mm 1 set foro esagonale 70mm 1 set foro a rombo 40mm 1 set foro tondo Ø 60 mm 2 griglie foro tondo Ø 100 mm

Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter b ...

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 40 mm -Weight: 0.9 kg

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm -Weight: 1.0 kg

Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

The machine is in good technical condition, after prior agreement it is possible to test it. - Nominal forming force: 120 t Working length: 3106 mm CNC control Delem (graphic 2D programming) Automatic calculation of bending sequence and collision detection Back gauge X axis with 2× manually adjustable stop fingers CNC electromotive height adjustment of the back gauge (R axis) CNC electrically controlled table deflection Upper tool adapter ROLLERI Equipment and accessories: - Front protective device (tilting door) - Rear protective device (sliding door) - 1× freely movable two-hand / foot control - Operating instructions including CE declaration

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Angle: 90° -Dimensions: 55 x 133 mm, see drawing in the photos -Length: 365 mm -Weight: 9.8 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 10 x 88 mm -Length: 2000 mm -with: storage box -Weight: 13.2 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 108 mm -Weight: 6.5 kg