press brake 100 used for sale

material width: 100 mm material thickness: 1 mm cross cut: ? total power requirement: 0,75 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Sheet Cutting Machine Workspace: 100 x 1 Drive: 0,75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 2000 mm band speed: 15 + 30 m/sel tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad Dust suction hood: 2 x 75.0 mm motor speeds:: 1420 / 2660 Upm. face grinding attachment: 400 x 100 mm total power requirement: 2.5 / 3.3 kW weight of the machine ca.: 148 kg. range L-W-H: 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding ...

square edge steel: 16 x 16 mm flat steel: 100 x 5 mm L-beam: 60 x 8 mm round bar steel: 18.0 mm weight of the machine ca.: 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for ...

turning length: 1000 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1675 kg. range L-W-H: 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...

weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad Total weight, approx.: 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set)  ...

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/s total power requirement: 3,0 kW weight of the machine ca.: 159 kg dimensions of the machine ca.: 768 x 1185 x 1417 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead mans switch Station for flat grinding small workpieces Low running costs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : Bulgarien : 133550 € : 2524.1 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00  ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 27,0 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...

x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle bore: 40 mm Tools speed: 30...500 U/min oscillation frequency: 5001400 DH/min pressure: 60 kp accuracy +/-: 0,001 mm total power requirement: 6,4 kW - max. diam of work: 350 mm - max. diam for centerless work: 70 … 150 mm - max. worksize: d = 155 mm - work.length: max. 1000 mm - work.length,centerless: 300 mm - hole in spindle: 40 mm - speed of spindle: 30 … 500/ U/min // rpm - oscíllation frequency: 500 .. 1400 DH/min // DS per min - pressure: 60 kp - precision: 0,001 mm - load: 6,4 kW, 380/400~ - Spezifikation: Stock finishing tools incl. - high precision surface micro finishing of pistons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: / mm plate length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 1000 mm table height: 850 mm weight of the machine ca.: 1,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1510 mm width: 680 mm height: 990 mm weight of the machine ca.: 0,55 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders Hydraulic Hollow Piston Cylinder 100 tons Manufacturer: Power Team Model: RH 1006 Model C Center Hole Cylinder/Ram - Double-Acting / Hydraulic Return 100 ton Capacity 6,000 in Stroke 12,375 in Retracted 18,375 in Extended The unit is NEW and fully functional. see pictures for more details.

Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: Chain cutter motor: 1.7 kW Rebating cutter motor: 0.6 kW Drill motor: 0.25 kW Blade length: 150 mm Chain width: 12–17 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Bernardo Type T 1000S swivel-spindle router for versatile routing work on solid timber, sheet materials and profiles. The machine is ideal for joinery and carpentry workshops requiring precise and high-performance milling solutions. Featuring a swivelling spindle, sliding carriage, angle stop and pneumatic hold-down device. Technical data: Milling spindle diameter: 30 mm Speed ranges: 1400 / 3500 / 6000 / 800 rpm Clamping length: 125 mm Motor power: 4.0 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany

Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the stable milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: Working width: approx. 1,000 mm Spindle diameter: 40 mm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: Working width: 720 mm Max. clearance: 820 mm Drilling depth, vertical: 45 mm Drilling depth, horizontal: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

TOS Hostivar BUB 32/1000 Universal cylindrical Grinder YOM 1986 Original TOS DRO Max. Grinding diameter 320 mm Max. Grinding length 1000 mm Max. weight of workpiece 350 kg Main motor output 16kW Dimensions 5190x1976x1668 mm Machine weight 5500 kg

press capacity: 28 t x-axis: 2000 mm y-axis: 1000 mm machine weight ab.: 11000 kg Youtube-Video-Links: https://www.youtube.com/watch?v=LdcmUuj8QnM&ab_channel=BaestleinGmbH https://www.youtube.com/watch?v=IcEmqxjpnoE&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 416 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 168 mm turning length: 145 mm travel -x axis: 130 mm travel -z axis: 110 mm Spindle Speed: 45 - 6.000 U/min. control: spindle passage: mm spindle bearing diameter: mm bar material dia.: mm total power requirement: kW machine weight ab.: kg rapid traverse x + z axis: 18 / 24 m/min rapid traverse X- and Y-axis: 24 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 620 mm stroke: 0-100 mm hole diameter in sheet thickness: 40 in 20 mm no. of strokes: 49 Hub/min Control: total power requirement: 15 kW weight of the machine ca.: 3.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 1,1 UpM T-slots: 6 x M16 Tilt Angle: 90-180-105 ° Tilting Speed: 30 sn min./90° dimensions: 2100x920x1100 mm weight of the machine ca.: 930 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: max. 700 mm : : max. 1 mm : Cutting capacity structural steel: max. 1 mm Cutting capacity aluminum: max. 1 mm Cutting capacity stainless steel: max. 0,5 mm : : max. 1 mm : max. 1,5 mm weight of the machine ca.: ca. 150 kg dimensions: 1200 x 400 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 300 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 400 mm : 1010 mm : 295 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. control: MemoryPlus Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle ...

weight max.: 1000 kg workpiece diameter: Ø 80 - 700 mm table turning speeds: 80 - 1600 mm/min. roll diameter: Ø 250 x 50 mm voltage: 230 V / 50 Hz range L-W-H: 500 x 300 x 384 mm Antrieb weight: 85.0 kg range L-W-H: 500 x 160 x 384 mm Mitläufer Description: - Device for rotating and positioning containers and cylindrical workpieces - Unit constructed of solid steel with polyurethane-coated metal rollers - Stepless speed control with DC drive system - Rotary knob for continuously adjustable rotation speed - Switch for clockwise/counterclockwise rotation - Foot switch for start/stop, - High-frequency protection Scope of delivery: - 1x drive unit with integrated control system - 1x rotating unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...

turning diameter: 360 mm turning length: 1000 mm swing diameter over bed slide: 215 mm reus: 30 - 3000 U/min spindle bore: 38 mm feed: längs 0,043 - 0,653 m/min total power requirement: 3,5 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1900 x 900 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...

table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0.6 - 6.0 U/min spindle bore: 60.0 mm swivelling range: 0 - 90.0 Grad weight of the machine ca.: 62.0 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Funct ...

sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.