press brake 100 used for sale

Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation.

Key data: 80 V, 100 , 400

For sale is a new Perkins diesel generator set with 100 kVA / 80 kW power (PRP), powered by a Perkins 1104C-44TAG2 engine. Highlights: Made in the EU · 30 months warranty. PERFORMANCE DATA • Continuous power (PRP): 100 kVA / 80 kW • Emergency power (ESP): 110 kVA / 88 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Perkins 1104C-44TAG2 • Displacement (l): 4.41 • Bore × stroke (mm): 105 x 127 • Compression ratio: 18.2:1 • Charging: Turbocharged & Intercooler • Injection: In-line Injection Pump • Speed Control: Mechanical • Cylinders: 4 DIMENSIONS & WEIGHT • L × W × H: 2140 × 810 × 1250 mm (soundproofed hood) • Weight: 1092 kg • Fuel tank: 348 l • Sound level: 70 dB INCLUDED 4-stroke, 1500 rpm, water-cooled high-performance diesel engine, Leroy Somer Alternator, ABB circuit b ...

Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details.

- Ram table size 1500 x 1600 mm - Lower Table 2200 x 2200 mm - Max. die height table to table 1600 mm

Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible.

There are two Arburg ALLROUNDER 420C 1000-290 GOLDEN EDITION available, year of manufacture: 1x 2011, 1x 2019, an on-site inspection is possible.

Rated current: 88A, connected load: 50kW, an on-site inspection is possible.

industrial robot, year 2006. Used machine. More info & price on IndustrialBuyer.

Table: 825 x 1140 mm Extendable workpiece support Spindle diameter: 50 mm Spindle length: 210 mm Vertical spindle travel: 190 mm Maximum profiling tool diameter: 200 mm Maximum tenoning tool diameter: 320 mm Motor 5.5 kW Incl. side-mounted tenoning carriage 5 speeds: 3500 - 6500 - 8000 - 10000 rpm

Throughfeed carcase clamp Carcases: Width: 280 to 1320 mm Height: 250 to 2800 mm Depth: 150 to 800 mm. Working height in the press: 500 mm Mechanic clamping (electrical motors)

pulling force - max.:100 t total power requirement:87 kW weight of the machine ca.:51 t dimensions of the machine ca.:95 m² m working stroke:2750 mm max. helix angle:+/- 30 ° Working stroke: 2750 mm

material width:150 mm material thickness:2,5 mm feed length:100 mm compressed air:6 bar clamping force of fastening pincer:2000 N clamping force of moving pincer:2000 N feeding force:1200 N weight:0,1 t Dimensions (WxDxH):0,35 x 0,85 x 0,5 m

material width:70 mm material thickness:0 - 1,5 mm feed length:100 mm material cross-cut:60 mm² feeding force:400 N clamping force of feeding pincer:1300 N air pressure - required:3 - 6 bar Weight:0,01 t Dimensions (WxDxH):0,4 x 0,4 x 0,7 m

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

Rated current: 14A, rated power: 5.4kW, weight: 920kg, with documentation. An on-site inspection is possible.

Rated current: 53A, connected load: 29kW, an on-site inspection is possible.

Clamping force: 500kN, heating power: 4.2kW, connected load: 19.2kW, weight: 2.2t, an on-site inspection is possible.

boring mill, year 2024, CNC 840D. Used machine. More info & price on IndustrialBuyer.

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1097 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 1000 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 2510 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-4012-twg2-generator-10 00kva-used/242, , = More information =, , Empty weight: 9.205 kg, Type number: 4012 TWG2 GENERATOR 1000KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator Volts: 0 , Generator Amps: 0 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -100kva-used/34, , = More information =, , Year of construction: 1010, Empty weight: 1.280 kg, Type number: 4045TF120 GENERATOR 100KVA

Engine Brand: LOVOL, Condition: NEW, Engine Cooling Type: Exchanger (on engine) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/lovol-1006twgm12-new/744, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1006TWGM12; Transport weight [kg]: 715

Engine Brand: LOVOL, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 135 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/lovol-1006-p6tadp2a43-new/ 743, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1006-P6TADP2A43; Transport weight [kg]: 715

Engine Brand: LOVOL, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 75 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/lovol-1004-4tz09-new/145, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1004-4TZ09; Transport weight [kg]: 510

Pad printing system ( 5 x MSC 100 in-line design ), a linear system with upstream parts supply (automatic mint card feeder) Drying tunnel Stacking device

Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100|50|13 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Drive: . kW Capacity: . kg/h material: . 8 pieces For manipulator A5.1 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 piece used FULL MOBILE CONCRETE MIXING PLANT SBM / SIMEM SMM 100 Year of construction 2007 Performance: 100 kbm/h Mixer unit Mixer SIMEM MSO 3000/2000 Additive dosing unit 2X 12.5l Cement scale 1200kg water dosing unit 600l Row silo / aggregate storage unit / compartment batcher Weighing belt 5000kg Aggregate/aggregate boxes: 4 X approx. 38.5 kbm Cement silos 4 X approx. 80 ton Fully automatic Dorner control Installed in a container Additive storage Installed in a container Location: Austria Available: IMMEDIATELY price net , ex location without guarantee and/or warranty, mistakes and/or false representations reserve, selling in current state – standing or recumbent, subject to prior sale

Granit marble Length: 1510 mm Width: 1005 mm Thickness: 160 mm Height on feet: 1015 mm Weight: approx 0,5 T

with air blower min. opening width: 600 mm max. opening width: 1400 mm max. stacking weight: 1.000 kg with protective grid

Transnorm conveyor belt GF 1000-700-600 RA2058 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

Automatic feed via Diethei PD 100 control To the extension on the right Max. feed length: 2000 mm

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Used automatic dough batching machine type SPdc-1000. New 2001. Automatic dough batching set 3 head.

Analog Densitometer Macbeth RD-100, in exception good condition for its age, transistor lamps, in working condition.

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven: YES sc ...

Dematic roller conveyor right with straight section 1000-90°-500-440 IR795 RA2356 Make: Dematic Direction of rotation: 90° right-running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm Length of straight section: 1000 mm Frame height: 132 mm Overall height including motor: 275 mm Conveying speed: 0.33 m/s Drive type: Round belt Electrical details: Motor type: SEW geared motor Motor power: kW 0.25 380V Optional: Supports Side guides Frequency converter for stepless speed control convertion to left Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For ind ...

Used Tetra Pak A3 Flex 1000 ml Square Filling Line Complete aseptic carton filling line designed for packaging liquid food products in 1000 ml Square cartons. The line includes filling, capping, accumulation, and secondary packaging equipment, providing a reliable solution for beverage and dairy production. Line Configuration - The filling line consists of the following equipment: - Used Filling Machine – Tetra Pak A3 Flex (Version 150) - Used Cap Applicator – Cap 30 Flex (HeliCap 27) - Used Cardboard Packer – TCBP 70 - Used Accumulator – ACHX 10 Tetra Pak Filling Machine General Information - Manufacturer: Tetra Pak - Model: A3 Flex - Version: 150 - Year of Manufacture: 2007 - Package Format: Square Technical Specifications - Capacity: 7,000 packs per hour - Package Volume: 1000 ml - Condition: Very good used condition Suitable Products - The machin ...

x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air classifier - Integra HWS-1000 KL (unused) This item is as new, as it was never in use. For sale: - Air classifier POWER HWS-1000 KL - Hook lift - system DIN 30722 - Conveyor belt special construction, foldable with stock winch - AA: 2750 mm, GB: 650 mm, steep conveyor belt with 30 mm V-profile incl. magnetic drum and VA chute - Power generator 100 KVA, Stage 3, 280 liter tank Condition: NEW The wind sifter was not in operation. Only the power generator has a running time of 2.566 hours The 2020 Integra HWS-1000 KL is an industrial air classifier machine primarily used for sorting and separating materials based on air flow dynamics. It is often employed in recycling processes or material handling where specific separation is required. The machine features a hook lift system compliant with DIN 30722 standards and includes a specially designed conveyor belt with a steep angle ...

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - .ucymachines/ Contact us at - sales@ucymachines

Complete baking line capacity: 1000kg/hour. Consisting of: Stainless steel vibrating supply hopper dimensions approx. 1950x1400x1350mm; Conveyor transport belt belt width 400mm; lift height 1900mm; Stainless steel baking oven inlet width approx. 700mm; min. product layer thickness approx. 40 mm max. product layer thickness approx. 70mm; Baking oven equipped with lifting mechanism oven dimensions approx. 6500x1400 mm; Stainless steel cooling tunnel dimensions approx. 3450x1000x1850 mm equipped with metal mesh belt and axial fans; Stainless steel glazing unit salt/glaze belt with agitator on mobile frame; Mobile flavoring dispenser working width approx. 800 mm; Mobile conveyor big-bag transport belt with supply hopper belt width 250 mm height approx. 2800 mm; Stainless steel controling panel; Video of bakeline in process available. Request video by contacting seller.

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: RAL5015 sky blue Stand Type: PNFB 12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Drf2Qd Footplates The stands are pre-assembled (screwed truss) Frame height: 1,750 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.