press brake 100 used for sale

Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Gas boiler for sale inklusive Weishaubt gas burner panel gas string and soundbox Price 3500 euro loaded on truck

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, pipe silencer, silencer -Ventilation duct: Pipe silencer with spiral slit -Connection diameter: 100mm -Dimensions: Ø 210 x 675 mm -Weight: 3.3 kg

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Round brush, grinding wheel, chip brush, wire brush -Round brush: Steel wire brush, 268 pieces -Outer diameter: 100 mm -Width: 22 mm -Bore diameter: 27 mm -Submission/Price: complete -Weight: 0.2 kg/piece

Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports Construction year: 2018 angle: 45° KW: 1,5/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Conveying length in mm (NL): 1500 Frame width in mm (NB): 1250 Belt width in mm (GuB): 1000 Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Movi-Mot For individual ...

Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...

Key data: 78 KW, 97 kVA, 400 V

Diesel Emergency Power Generator 100kVA, 4 Cylinder EU StageV Engine: Deutz TCD4.1L4 Generator: Stamford UCI274C Frequency: 50Hz Voltage: 400/230V Tank: 188l Power PRP (kVA / kW) 97/78 Power ESP (kVA / kW) 107/86 Noise Level Lp(A) (dB(A)@7m): 67 Sound power-LW(A) (dB(A)): 95 Control: DSE 7420 MKII Fuel filler neck with key Tropical-proof cooler for operation at 50 ºC. Prepared for maintenance intervals every 500 hours Emergency stop button Differential protection Central stop eye Access door to the radiator

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

Forming and/or portioning machine for a wide variety of malleable masses This machine can be used to produce products in an infinite number of individual shapes with a flat bottom. We used the machine to portion our date chocolates. - Tabletop device – compact and space-saving - For small to medium production capacities - Fully automatic operation - Easy tool change and quick cleaning - Cost-effective forming rollers can be ordered TECHNICAL DATA: - Year of construction: 2021 - Condition: very good (Nov. 2025 fully serviced) - Dimensions (L×W×H): 750 mm × 550 mm × 940 mm - Weight: approx. 81 kg - 85 kg - Working width: 95 mm - Voltage: 230 V / 50–60 Hz / 16 A - Drive power: 0.5 kW - Control voltage: 24 V/DC PERFORMANCE (calculated with marzipan mass) – Volume (m³/h): 0.113 – Mass (kg/h): 128 – Number of units (pcs/h): 7,066 (bar: 80/20/1 ...

Baldor PSM 150-100-x

Prometec process monitor system 100

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...

Kannegiesser belt conveyor GF 1000-680-600 RA1303 The Kannegiesser belt conveyor is from 2018 and is in good (used) condition. Technical data: Conveyor length (NL): 1000 mm Frame width (NB): approx. 680 mm Belt width (GuB): 600 mm Overall height (BH): 80 mm Conveyor speed (v m/s): 0.67 m/s Drive: Bauer Gear motor Electrical data: 400 V / 50 Hz, 0,37kW Return roller (UT): Ø = 60 mm Belt: 2-ply PVC belt, gray, smooth Year of construction: 10/2018 Optionally available: Supports Side guides Frequency converter for stepless speed control All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Bauer Getriebemotor KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of delivery: without supports and si ...

Manufacturer: KraussMaffei Model: 420-1000 CX Year of Manufacture: 2016 Type of Machine: Injection moulding machine Capacity: 420T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 7 - Height 2 (cm or m) - Weight 25500 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3; Compressed air 7 (bar or psi) - Cooling or heating - water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintance, 13Kw motors, highshear overhauled 2017, level detection, 50mm discharge pipe, 3Ph

Manufacturer: KraussMaffei Technologies GmbH Model: 650-1000-750 CX Z Year of Manufacture: 2017 Type of Machine: Injection moulding machine Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 35000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 650-1000-750 GX Z Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 650T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 10, Height 3 (cm or m) - Weight 32000 kg - Voltage 480 Volts - Current 400 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: KraussMaffei Technologies GmbH Model: 1000-2000-1400 MX W Year of Manufacture: 2018 Type of Machine: Injection moulding machine Capacity: 1000T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 4, Width 10, Height 3.5 (cm or m) - Weight 40000 kg - Voltage 480 Volts - Current 500 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details.

Manufacturer: General Inspection (Gi) Model / Machine Type: DT-100 Date of Manufacture: 10/2018 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Motorized vertical test bench IMADA MV-100BA., Dynanometer Chatillon:, 100 x .05 Lb, 50 x 05 Kg, 500 x .5 N

This 3-axis FAMUP MCX 1000 vertical machining centre was manufactured in 1997. It features a longitudinal travel of 1,100 mm, transverse travel of 480 mm, and vertical travel of 470 mm. The machine includes a tool magazine capacity of 30 positions and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the FAMUP MCX 1000 vertical machining centre we have for sale. Contact us for further details.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Four identical Kettma Hamburg 100 KA linking machines, one KMF 105 linking machine, Series 5, and spare parts are available, an on-site inspection is possible.

Pharma Mixer Granulator Manufacturer: Diosna Machine Type: P 100 Bj. 1994 Gross capacity 122 l, net capacity approx. 37 - 100 l Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-bladed, one-piece, drive with air gap seal Double-jacketed container for heating/cooling (without own heating/cooling unit) Probe Product Temperature Blind flange for retrofitting a DIOSNA mixing probe Sealable opening in the container lid for adding mixing components Nozzles for fluid addition Screw cap with degassing/vent filter Pneumatic spout, swivel for cleaning HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurized enclosure Protection class E Ex p (T4), Fabr. Gönnheimer, type F 800, control unit FS 821, control panel BT 81 4.1 Separate control cabinet (no Ex) with PLC Siemens S5-115U Drive 400/230/ ...

; Gross weight [kg]: 6748; Engine: Hyundai DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1130

; Gross weight [kg]: 9040; Engine: Baudouin 8M33G1000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1250

Key data: 1000 mm, 900 mm, 700 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 100 eVo Year of Make: 2013 Condition: Very good – machine partially overhauled in 2023  Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain HR 410 Technical data: • Spindle: 18000 rpm, infinitely variable • HSK-A63 interface • 60x WZW • Swivel rotary table 950 mm x 800 mm • B-axis 5°/+110° • C-axis 360° • IKZ (internal coolant supply) 40 bar • 600 l coolant tank with paper belt filter • Chip conveyor • Rinsing gun • Blowing air through spindle center Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...