134,860 used machines on RESALE, but how to find them? Machine Search
Key data: 1000 mm, 560 mm, 800 mm
Inv. Num. : 3714 Type: MH 1000 C Producer: MAHO Created: 1991 Parameters: Control system: Philips CNC 432 Hours: 62345 h Work table length: 1150 mm Work table width: 800 mm Tool magazine: 24 pieces Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 3400 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 800 mm Cone: ISO 50 Maximum tool weight: 800 kg Machine weight: 7.3 t Equipment: 3 tool holders
NAKAMURA TOME WT-100 CNC Tower TECHNICAL FEATURES: Year: 2012 NC Type: FANUC 31i-B Distance between spindles: 735 [mm] Maximum diameter Turning time: 190 [mm] Maximum length Machinable: 503 [mm] Y-axis travel: -31 / +31 [mm] Z1 axis stroke: 503 [mm] X1 axis stroke: 135 [mm] Z2 axle stroke: 503 [mm] X2 axle stroke: 135 [mm] X1 Axis Fast Forward Speed: 16000 [mm/min] X2 Axis Fast Feed Speed: 16000 [mm/min] Z1 axis fast feed speed: 40000 [mm/min] Z2 axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 6000 [mm/min] Spindle Nose: A2-5" Maximum diameter in bar turning spindle: 42 [mm] Spindle Bore: 56 [mm] Maximum speed Spindle: 6000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter Spindle Nose: A2-5" Counter-spindle bore diameter: 56 [mm] Counter-spindle stroke: 525 [mm] Maximum speed Spindle: 6000 [rpm ...
Machine spirit level, block spirit level, frame spirit level, straightedge level, precision spirit level, frame straightedge level, precision machine spirit level -Manufacturer: Fr. Keilpart, Precision machine spirit level -Reading: 0.03 mm/m -Box dimensions: 220/65/H70 mm -Weight: 2.1 kg
; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
Cooling system: Heat exchanger cooled; Gross weight [kg]: 1130; Engine: Cummins 6BT5.9-GM83; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
Automatic Transfer Switch - ATS Panel - ATI Panel, 100 Ampere - Applicable for generators up to 65 kVA; Gross weight [kg]: 50; Registration Number: 1
Pile turner Rachner RD 1000 P; cleaned and tested; Platform size 128x80cm; Load capacity 1000kg; Opening width max.1400mm. Pile turner Rachner RD 1000 P; cleaned and checked; platform size 128x80cm; lifting capacity 1000kg; max.openig width 1400mm.
Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm
; Gross weight [kg]: 385
; Gross weight [kg]: 2100
Thank you for your interest in our used machines, which we are able to offer you as follows: Manufacturer: Sollich Model: 100F Chocolate Tempering Machine "Mini Temper" Year of construction: 1992 Masch. Nr.: 2241 Capacity: up to 80 kg/h Miscellaneous: good condition Chiller New in 2023 With the 100 F, you can keep 25 kg of couverture at a constant temperature and process it ideally pre-crystallized for several hours, or produce up to 80 kg of pre-crystallized couverture per hour. We offer this machine for sale "as is". from Hess warehouse. Lichtenau, unpackaged
Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed
grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...
Polar Mohr stacking lift L-1000-W-6 => refurbished for ergonomic working at user-friendly working heights Specifications Tub size 1400 x 1000 mm Stroke max. 910 mm Load capacity max. 1000 kg The automatic lifting of the material to be cut makes it possible to the operator at an ergonomically favourable working height for him the material into the vibrator or directly into the cutting machine shop. However, the stacking lift can also be used for stacking material to be sliced. The lowering takes place semi-automatic. This means that the process will be manually started and passed through the light barrier automatically stopped. POLAR stacking lifts do not have to be can be anchored to the ground and can therefore be easily be converted. Customer: - The productivity of the cutting machine increases by up to 10%, as the working height during loading/unloading rem ...
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1000-N QiLin The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multipl ...
; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 1000
This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,100 mm Number of shelves per row of shelves: 05 pcs. Number of levels plus floor level: 06 pcs. Volume Specifications: Pallet spaces per field: 21 pcs. Pallet spaces per row: 105 pcs. Total pallet spaces: 105 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanized Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled (bolted truss) 12,500 mm high 1,100 mm deep 60x Pallet rack crossbeam, used Material colou ...
FOIL SEALING MACHINE type TS 1000 C-2 Year of Build 1980, Machine No: 1748, for the production of bags made of suitable Polyethylene and polypropylene films Product: Tren suture bag Processing: single-lane or dual-use printed two-lane unprinted Working width: max. 1000 mm Section lengths: 80 - 600 mm Film thicknesses: 2 x 0.015 - 0.100 mm depending on the welding wedge design Working cycles (mech.): max. 150/min. depending on film thickness, type of film, film quality and Section length Film web speed: max. 35 m/min Power consumption: 4 KVA Nominal voltage: 380 V Nominal frequency: 50 Hz Control voltage: 220 V Cooling water consumption: approx. 42 l/h Paint: light grey according to RAL 7030
Details Machine no. 2042.6616-05 Year of manufacture 2004 Circumferential diameter over bed 1,000 mm Circumferential diameter over bed 1,000 mm Center height over flat web 500 mm Bed width 560 mm Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Three-phase motor infinitely variable (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control system Manualplus 4110, completely renewed about 1 to 2 years ago 2 Lynettes Equipped with rotary power chuck, diameter approx. 500 mm. Including a lot of accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix base holders, size D. Machine was equipped with a separate milling device, with its own control system, value approx. € 20,000.00. Only served by the owner, ver ...
used
Dear Ladies and Gentlemen, We have constantly used transformer stations for wind turbines from 630 KVA to 2500 KVA in very good condition in stock
new
KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3
A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.
Manufacturer ZAYER Model MEMPHIS 10.000-U Month/ Year Manufactured 2002 CNC HEIDENHAIN TNC-430M 9 AXIS Table Table dimensions 9,500 x 2,000 mm. Permissible Weight on Table 20,000 kg Number/Width/Distance T Slots 8/28/250 Tours Table longitudinal (X-axis) 10,011 mm. Ram transverse (Y-axis) 1,960 mm. Vertical (Z Axis) 1,112 mm. Width between uprights 2,850 mm. Distance from the table to the nose of the head axis 45º in vertical position 1,291 mm. Distance from the table to the nose of the head shaft 45º in horizontal position 1,365 mm. Progress Working (X/Y/Z) 20,000 mm/min. Fast X-Y-Z Axis 30,000 mm/min. Head Automatic Type 45º Head positions 360.0000 x 0.001º Cone DIN 69871 AD 50 Maximum rotation speed 6,000 r.p.m. Main engine power 37 kW Automatic tool changer AITEK Manufacturer Type Horizontal/Vertical Tool Magazine Positions 100 ISO 7388-2 B50 Tool ...
Punching tool, punch, stripper, hold-down -Scraper: Hold-down device for dies -Hole: Ø30 x 258 mm -Dimensions: 310/100/H125 mm -Weight: 4.6 kg
WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER
Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg
; Gross weight [kg]: 8380; Engine: KTA38-G14; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
drill diameter: 2,4-13 mm drilling length: ca 165 mm lip angle: 90-140 ° total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 5 mm plate thickness: 1000 mm distance between columns: mm total power requirement: 4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Switchgear, control system, UV light -Honeywell dynamic self-check ultraviolet flame amplifier -Voltage: 220/240 V AC 50 Hz -unused: in original packaging -without original packaging: 1 -Quantity: 1 available -Price: per piece -Dimensions: 125/90/H50 mm -Weight: 100 g
A semi-automatic table-top tube sealing machine from Neweco is available. Tube materials: LDPE/HDPE/PE/PP/laminate, max. tube diameter: 50mm, max. tube length: 250mm, max. sealing capacity: approx. 720tubes/h, machine dimensions X/Y/Z: approx. 600mm/800mm/800mm, weight: approx. 70kg, estimated counter reading: approx. 80000tubes. Documentation available. An on-site inspection is possible.
Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm
Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...
Key data: 1000 mm, 1 t
for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg
calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800
maximum number of results exceeded
please refine your search
