press brake 100 used for sale

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg

Conical rounder Model: KCM 1000 Capacity max. 1200 pieces/h Stainless steel version with Flourer Cones and warp grooves with Teflon coating Effective path approx. 3.5 m Adjustable knitting rings for dough weight from 300 to 1200 g Machine mobile Connection 400V, 0.75 kW, 16A-CEE plug Dimensions ca: 1050 x 1150 x 1600 mm, WxDxH Used machine overhauled with 6 months warranty

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 20 mm/M16 -Stroke: 100 mm -Cylinder tube outside Ø 40 mm -Total length retracted: 280 mm -Admission: hole Ø 20 mm -Dimensions: 280/40/H60 mm -Weight: 2.2 kg

Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

DAIKIN EWAD 100E-SL008 Brand:DAIKIN Type:EWAD 100E-SL008 Stock Number:M22-4590 Cooling capacity: 97.9 kW Number of fans:2 Refrigerant:R134a Refrigerant content: 18 kg Rated voltage: 400 Volt Power consumption:38.8 kW Motor power: 2x 0.78 kW Dimensions: 2165 x 1292 x 2273 mm Weight:1.751 kg Year of construction:2012 Quantity in stock:1 piece(s) Price on request Description: Nice air-cooled Daikin chiller with 1 screw compressor. This chiller is equipped with a switch box and a controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Also visit our website: used-refrigeration

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

Fully automatic Saddle stitcher Configuration: Fully automatic from feeder to trimmer • 1 cover folder feeder • 1 horizontal sheet feeder • 6 vertical sheet feeders • Control panel with main operating point • Stitching machine with wire feed gear • Trimmer with trimmer feed • Compensating stacker RIMA RS-14 Technical specifications: Maximum format untrimmed 320 - 350 x 460 mm Maximum trimmed format 340 x 450 mm Maximum cutting thickness (single use) 12 mm cutting thickness (double use) 1/2x punch knife width Maximum staple thickness 6 mm Maximum trimming front trimming 50 mm Maximum trimming head and foot trimming 50 mm Stitching heads max. 4 Hohner narrow stitching heads staple length of the vertical feeders approx. 250 mm (depending on the paper) Arch opening vacuum suction cups at least 6 mm rear fold, 8 mm front fold, Sheet opening gripper max. 20  ...

Specifications Type: SDJ 1000/1600 Year of construction: 2014 Lifting capacity: 1000 kg lifting height: 1600 mm Mast height, lowered: 2080 mm Mast height, raised: 2080 mm Total weight: 214 kg Directly from the customer used from November from CH-Pratteln available.

Available in stock 1 x Used 1000 bar Two Stage Hydraulic Hand Pump with hose. The equipment is used but in good working conditions.

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Handover: as is as seen -Accessories: missing, see photo -other sizes: available -Dimensions box: 265/145/H30 mm -Total weight: 0.7 kg

Micrometer, micrometer screw -Measuring range: 75 - 100 mm -Accessories: see photo -other sizes: available -Dimensions box: 265/125/H25 mm -Total weight: 0.8 kg

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine Details Warehouse number 1105-03727 Machine Type Machining Center - Vertical Make YANG EAGLE Type MCV 1000 Year of construction 1998 Control type CNC Control Fanuc O-MD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1015 mm y-travel 500 mm z-travel 500 mm Control Fanuc O-MD Clamping surface table 1070x500 mm Table load - central/maximum approx. 250 kg Tool holder BT 40 Spindle speed: 24...6000 rpm Operating hours 5617 h Tool magazine with 20 seats/places Total power requirement 12 kW Information Equipment: CNC FANUC OMD -Cooling device BT 40 Copy of user manual available! Machine can be demonstrated! I.d..

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cam switches, circuit breakers, motor protection switches, step switches, rotary switches -Type: WAA477/100 VZ -Voltage: AC-3 kW 3 ph 380 V/440 V 125 A -Dimensions: 330/95/H130 mm -Weight 2.3 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 28 x 57 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 Stück -Dimensions: 365/273/H250 mm -Weight: 20 kg/piece

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Riello: Sentinel Dual UPS UPS system SDH 1000 -Connection: 220-240 V/50/60 Hz -Power: 1000 VA/900 W -Dimensions: 425/170/H435 mm -Weight: 37.3 kg

We offer you an agitator (waste water technology) from the company Højmark. - Model RVPG S 100 - Power: 4 KW - Wings are made of stainless steel - Speed 1500 min/-1 - Slow running The prices include VAT (VAT can be demonstrated) and are non-binding If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. GTC Trade & Service Inh. M. Schönau Halbmondsweg 3 99885 Ohrdruf, Germany

Three-phase motor with 2 speeds, electric motor -Power: 2.7/3.3 kW -Speed: 1420/2850 rpm -Design: B5 -pole-reversible -Protection class: IP 54 -Dimensions: 355/250/H200 mm -Weight: 27 kg

Brand:-Siemens Model: Simatic S5-100U Programmable logic controller Siemens Simatic S5-100U If you have any questions, please do not hesitate to contact us, Yours sincerely,

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Temperature sensors, resistance thermometers, thermometers, thermocouples -Thermocouple: LC-05, unused Ovp -Type: LC-05/NI-100 D DM -Number: 6x available -Price: per piece -Dimension packaging: 150/20/H20 mm -Weight: 0.1 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, caster, pallet truck castors -Manufacturer: Wheels-Vogel, heavy-duty bike -Wheel size: Ø 85 x 100 mm -Inside: Ø approx. 25.5 mm -Weight: 1.3 kg

electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: IDM 100/30.6013/2 -Power: 40 W -Speed: 1380 rpm -Shaft: Ø 9 x 8 mm -Design: B5 -Protection class: IP 22 -Dimensions: 165/135/H160 mm -Weight: 4 kg

pile lifter Hunkeler AS 1000; condition as is; only tested for function; Format 850x1200mm; Load capacity 1000kg; Manual or foot operation. Pile lift Hunkeler AS 1000; condition as is; only checked on function; size 850x1200mm; lift capacity 1000kg; hand or foot switch.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: KR 100, 1/4 -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 345/200 / H230 mm -Weight: 29 kg

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 212.20.100 1.6 bar -Screw connection: G1/2 B below -Dimension box: 140/110/H60 mm -Weight: 0.6 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: Hasco, high-performance cartridge heater -Item No.: 277202 10 x 100 mm -Power: 400W 220V -Dimensions cartridge: O 10 x 100 mm -Weight: 0.1kg

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 100 x 50 mm clear width: 1,900 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey Box profile: 100 x 45 mm clear width: 1,900 mm Design: Head traverse

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DN-80-100-PPV -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 320/95/H125 mm -Weight: 4.8 kg

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

Milling machine MACMOM M 100, year of construction 1970. Without table. At call.

Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Lashing eyes: attachment points, 40 pieces -Material: stainless steel, 10 thick -Dimensions .: 100 x 48 x H110 mm -Eyelets: 60 x 30 mm -Bores: Ø 18 mm -Price: complete -Total weight: 31 kg

Dreh-Øüber Bett: 320 mm Dreh-Øüber Support: 185 mm turning length: 1000 mm Spindelbohrungs -Ø/ Aufnahme: 32 mm mm spindle turning speed range: (12) 85 - 2000 U/min feeds - longitudinal: 0,006 - 1,77 mm/min feeds - cross: 0,003 - 0,888 mm/min thread - mm pitch: 0,1 - 28 mm thread - module: 0,1 - 1,75 mm thread - inch: 2,5 - 75 inch. voltage: 400 V / 50 Hz power capacity: 2,2 kW weight of the machine ca.: 0.8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Lashing eyes: attachment points, 43 pieces for screwing or welding -Material: stainless steel -Dimensions .: 100 x 138 x 10 mm -Eyelets: 60 x 30 mm -Bores: Ø 18 mm -Price: complete -Weight: 32 kg

Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker