press brake 100 used for sale

ALREADY SOLD MORE MACHINES COMING SOON BMB High Tonnage Injection Molding Machine 1000 Tons Model KW 1000 / 7500 Year of Manufacture 2000 Voltage 400 Frequency 50hz Availability, ready to load See pictures please

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1130

Massey Ferguson 1014

Diesel tank - 1000 liters - Double-walled - As good as new condition - Completely cleaned - Stackable - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - To be able to give an exact freight price please send me a request with your zip code - - - - - Price: - 1.000,- € + 19 % VAT = 1.190 € - An invoice with VAT will be issued - Payment: Prepayment - - - - - Other: - Sale of used machines in the actual state to traders without warranty

Capacity: 1016kWh, Nominal power kW: 800, Nominal power kVA: 1000, Nominal voltage (50Hz): 400 , Protection: IP54, Heating cooling system: HVAC , Max current (A): 1600, Nominal current discharge (A): 400, Discharge current (C): 1.5, Battery type: (NMC), On grid and off-grid applications: Yes; Gross weight [kg]: 16000; Accessories: Battery, Control Panel, Stahldach, 12touch screen, Fire extinguish system, AEG Bi-directional Storage Converter, 20ft Container

: 10000 m³/h Weight: 700 kg Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Air-Operated Double-Acting High Pressure Pump The Resato P200-100-2 is an air-powered, double-acting high-pressure pump used for the pressure generation of liquids in various industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump works on the principle of an automatic reciprocating differential piston to convert compressed air into high-pressure fluid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-Operated, Double-Acting High Pressure Pump Air piston diameter: 200 mm Gear Ratio: 100 Flow rate:6.6 l/min Weight: 21 kg Year 2019 Max. outlet pressure Controlled by the air supply pressure, at 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type chart for P200-100-1/P200-100-2). Compatible media Suitable for water, oil or an emulsion of both. Can also b ...

Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Center height: 180 mm Grinding diameter: Ø 290 mm Distance between centers: 1000 mm Lots of equipment

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

table length: 1000 mm table width: 1490 mm table height: 840 - 890 mm weight of the machine ca.: 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MANN Filter, for engine 28/32 Part number: CF 1000

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm

length: 1000 mm width: 570 mm height: 1200 mm weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,x0,6x1,2 m used angle plate in very good condition with t-sluts and additional bores 22 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...

GRONINGER PFS DFVN1000 FILLING MACHINE Filling and stoppering machine for presterilized disposable syringes. Can be used for testing sizes and small batches of products. For laboratories, test series and small batches. Machine built in 2009. CHARACTERISTICS - 2 rotary piston pumps with 2 filling needles. Gassing during filling and stoppering - Filling via rotary piston pump, peristaltic pump, time pressure, or in combination PRODUCTION - Output: 4.800 syringes/hr (max) - Syringe diameter: 8,15 mm (with stoppers) - Dosing range: 0,2 ml – 1,5 ml ENERGY - Electricity: 220/380 V, 50 Hz, 3 Ph+N+PE - Power consumption: 7 KVA (approx) DIMENSIONS - Footprint: 1500 ｘ 1135 ｘ 2000 mm (ca)

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - daylight opening: 90/105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Yasda YBM 900N CNC Precision Horizontal 5 Axis Machining Center CNC control: Fanuc 160i-MA Table size 1000 x 1000 mm Table load 2000 kg Number of pallets 5 workpiece diameter x height 1400x1200 mm Travel X-Y-Z axis: 1800 mm A-axis (table inclination) +20 / -110 Travel of the B-axis 360° Spindle cone DIN 69871/50A Spindle speed 10,000 rpm Tool storage capacity 240 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.

We have 2 Barmag FK6-1000V texturing machines, double friction unit, manufactured in 2014, 2x240 spindles. individual morter friction units, pneumatic yarn pusher, double W2 roller, Barmag unitens, A,B side individualm control, very good machines. price $300000/set FOB China. We also have 1 Yuejian YJ-1000 double friction texturing machine available for sale, manufactured in 2018, 2x 288 spindles, double W2 roller, PU disc, airjet, A,B side individual control, shaft drive, very good condition. price $200000 FOB China

; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Compact cell Fanuc ArcMate 100/7L with R30iB control, Lorch S3 pulse welder new Number of axles: 6 payload: 7Kg working range: approx. 1633 mm Year of construction: 2016 Table area each 750x500mm Overall dimensions: approx.:2500x1500x2200 Total weight: approx. 2000kg Net amount plus 19% VAT

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

-extendable spiral kneader Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left rotation -Stainless steel spiral and guide rod -with 2 stainless steel boilers -per boiler for max. 100kg flour or for max. 160kg dough -Boiler manual locking

Schaudt PF4 1000 - Premium overhaul [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 mm - Grinding length: 1,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 300kg - Workpiece headstock: MK4 - Tailstock: MK4 - Installation dimensions: approx. 4,500x2,400 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

Vat boilers for spiral kneader Kemper ST 100 A -Kneading kettle with wagon and handle -for spiral kneader Kemper ST 100 A -Boilers are made of stainless steel -Boilers are for max. 100kg flour or 160kg dough

dimensions 820x540x70 capacity 1 to daylight 2337 mm

Washing screw stainless steel, screen basket wash screw, drum sieve, blanching drum used, Manufacturer: WOLFF Type: B 1000/3000 Diameter approx. 1000 mm, Drum length approx. 2800 mm partly stainless steel Drive 0.55 kW Total dimensions approx. 4500 x 1800 x 2200 m. Changes and errors in the technical data and information excepted.

Polygraph kama folding glue machine with 3 points format 104

capacity 250 Kg

Oven, wood chip stove, biomass stove, boiler used Manufacturer: MAXXTEC Type: IT-A-550-100-V Year of construction 2001 550 kW 350°C 540 l Diameter approx. 1700 mm Dimensions: approx. 3000 x 1700 x 4500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.