press brake 100 used for sale

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

for 200, 250 and 330 ml

used chamber filter records 1000 x 1000 PP approx. 190 pieces in the camp

used membrane filter records, membrane chamber filter records 1000 x 1000 pp approx. 190 pieces in the camp

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Used appr. 100 m³ / 100,000 litres steel tank, single-walled, top condition, aboveground storage tank, on 2 bases, water tank, firefighting tank, water cistern. volume: 100 m³ / 100,000 litres material: steel tank dimensions: appr. Ø 3.0 m x 16 m long weight: appr. 15.0 t painted white outside, pure steel inside The container is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. The container / steel tank can be used as storage tank for many different media. Upon request we can coat the inside with a food-suitable paint or rework the tank into a firefighting tank or otherwise to suit your demands, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has alrea ...

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine of the high-Z series in TUeV-certified quality (EMC). With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the high-z CNC unit, they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or clamp the factory into a high vice (the machine stands on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be processed). Or just do engraving or drilling then they simply work on a flat surface, on which they then attach, for example, an MDF plate, which they once plan overfraes and are then able to work exactly in depth up to approx. +/- 0.02mm. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle drive ensures  ...

The quasar 100 kN is a product after the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typically obtained from static universal testing machines tensile, pressure, bending and cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-confi ...

For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-

; ready for operation

Water distillation plant for water for injection according to the pharmacopoeia. Power up to 2,200 l / h

ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000

Anew ex works! Hydraulics - membrane pump Abel HMD-G-80-1000 long construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,

used hydraulics - membrane pump Abel HMD-G-80-1000 compact construction method conveyor achievement: max. 80 m? / h conveyor pressure: 15 cash engine: 45 kW, 400 V, 50 hertz, 1500 rpm - with foreign fan the pump is steered about Frequenzumformer.

Article: Black rubber Compensator Manufacturer: Wanda Type: black with length limiter Condition: used, very good Model: DN 100 PN 10/16

According to the description below

Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

working width 1000 mm Still in operation: Yes Available: sofort

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

Thank you for your interest in our used machines we can offer you as follows: Many thanks for your interest in our second-hand machinery, please find below our offer: Manufacturer / manufacturer: National Lab model / type: 1000-1 Proficool UKT recirculating cooler/chiller chiller temperature controller Details / different: laboratory chillers ProfiCool UKT 1000 1 / almost good as new! Extremely quiet laboratory chillers with maintenance-free, air-cooled chiller. Heat exchanger made of brass. Control Panel with electronic controls with digital display (LED) as well as separate a / output switches for pump and cooling. External casing made of stainless steel. Filler for filling of the cooling circuit. Hose connections (olives) with a 12 mm outer diameter.

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very a ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Generators of 100 kVA (hood unit) power: 100 kVA / 80 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF45TE2F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 4-L Total displacement: 4.5 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 22.6 l / h Fuel consumption 75% PRP: 18.5 l / h Fuel consumption 50% PRP: 13.4 l / h Oil consumption under full load: 0.1% of fuel consumption Control: Mechanical Inner diameter output exhaust pipe: 70.3 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation ...

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 1000 screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 1000 mm screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

3000 x 1500mm 10,000 W

Storage tanks outside marbled for wine, water, fruit juice, schnapps 5.100 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3357 mm Cylinder height: 2500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 5.100 liters NEW! Measurement und weight: Diameter: 1610 mm Total height: 3260 mm Cylinder height: 2490 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ...