press baler used for sale

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long

SMC Pressure Sensor PSE202-M

Serial number: 042-024/51 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220/60V Connection: 17 kW Nominal current: 80 A Nominal force: 1000 kN Operating pressure Speed: 200 mm/s Plunger stroke: 500 mm Projection: 360 mm Maximum distance between table and plunger: 800 mm Table dimensions: 900 x 560 mm

Serial number: 0069 Compressive force: 28 kN Stroke: 12 mm Delay time: 0.063 sec min./max. operating pressure: 3/6 bar Table dimensions: approx. 200 x 150 mm incl. installed punching tool

Table dimensions: approx. 190 x 110 mm incl. installed tools

Machine number: 3-0512 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 160 mm incl. installed punching tool

Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused

Silo 20 m³ volume with hook holder Payload 28 to, dead weight 2500 kg Diameter 2500 mm, height 6600 mm, outlet height 1100 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Footprints 2400 x 2500 mm Next Pressure Test 07/28

If you are interested, please message

Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line

Length approx. 1800 mm; WILA NS Recording

Pressure silo 34 m³ volume, payload 48 to, dead weight 3000 kg Diameter 2500 mm, height approx. 9000 mm Cone with air loosening Spout with ball valve DN 80 Inspection Cover NW 500 Silo Back Protection Ladder Blow-in line, vent line Pressure test book not available

Used Kilian TX-40 AM rotary tablet press. Number of stations 40.

If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for a custom quote HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 20T PHC Pellet Press Machine Type: Hydraulic Single Column Press Year of construction: 2023 Location: Gelsenkirchen, Germany Specifications: - Press force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Print build-up time: max. 2 seconds (Closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20°C - Deflection:

Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Equipped with 10 crimp sets; unused

with mounted punching tool

Pressure silo 3 m³ volume, payload 4800 kg, dead weight approx. 1200 kg Diameter 1750 mm, stand dimensions 1700 x 1720 mm, Spout height 1200 mm / 900 mm Outlet flap NW 250, silo tip with ball valve DN 65 Filling lid NW 450 in the silo roof, Inspection cover NW 450 in silo cylinder Crane eyelets, forklift pick-up shoes Vertical ladder + platform

# Description text for the press If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Mold opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Specifications: - Pressing force: 40 tons - Maximum open height: 1800 mm - Tappet travel: 1500 mm - Oil Temperature Monitoring: Electric Air Cooling - Lubrication: Manual via grease fitting - Extending table travel: 1200 mm - Extending table speed: 30 mm/sec - Electrically infinitely variable ram: 180 degrees - T-slots: According to customer requirements - Pressure setting: From 10 tons to 40 tons - Monitor: 10" on the control cabinet for pressure adjustment and warning ...

two pieces of different designs

Machine number: 2-0538 Compressive force: 28 kN Stroke: 12 Table dimensions: approx. 200 x 160 mm incl. installed punching tool

Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves

Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line

Specifications Maximum pressure: 56 tons Year of Make: 2016 Press force: 3.8 kg/cm² Number of bindings: 5 Channel cross-section: 1100 × 750 × 600÷1200 mm Dimensions of the tailgate: 990 × 1250 mm Bale weight: 250 - 500 kg Weight: approx. 15.5 - 17.5 t Power connection: 3 × 400 V250 - 500 kg Bale tying: automatic Drive power of the main motor 75 kW Nominal current of the main motor 125.22 A Pump capacity 438 l/min Oil cooler 4kW Oil heating 1 kW Theoretical throughput 535 m3/hour Theoretical flow rate to density 20 kg/m - 10.70 tons/hour Theoretical throughput to density 50 kg/m - 26.75 tons/hour Machine in operational condition, in continuous operation. Courtesy, please contact the seller directly regarding this machine tel. 508 115 007

Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000

This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information.

Bipel Tiltmaster 120 Press Closing force 120ton Platen size 458 x 458 Opening force 180KN Ram stroke 100mm With vacuum Max. Daylight between platens 200mm Overall dims: 1195mm wide x 1000mm deep x 2000mm high Weight: 3000kgs

SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water

Laminating press manufactured in 2001. This WEMHÖNER KT-F-1E features a pressing area of 5,750 mm x 2,200 mm, with pressing plates measuring 2,600 mm and 2,620 mm in length. The machine accommodates thicknesses from 6 mm to 40 mm and operates at a pressure of approximately 40 kg/cm². If you are looking to get high-quality laminating capabilities, consider the WEMHÖNER KT-F-1E machine we have for sale. Contact us for further details.

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-14 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 130 to 400 grams/piece Pitch 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Many more dough dividers in stock!

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Subrange 40 to 120 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Option: other knitting plates Maintenance contract Many more TOP roll presses in stock!

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg

Used Hermetic Press - Plate Press for Concrete Slabs, Terrazzo Slabs, etc. Manufacturer: OCEM Type: OPA850 Year of Make: 1994 with washout system for exposed concrete, flat storage and steel pallets Used hermetic press - slab press for concrete slabs, terrazzo slabs, etc. Manufacturer: OCEM Type: OPA850 Year of construction: 1994 with washing system for exposed aggregate concrete, flat cycle and steel pallets

Key data: 250 t

Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg

for sale - PROFI Hydraulic Workshop Press HF2 30 tons Clear width 560 mm Hand and foot operation Piston stroke 160 mm Cylinder diameter 115 mm Weight approx. 165 kg further models and inquiries to FSA Maschinen AG