We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Key data: 750 kN, 150 mm
Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: BBT Presses, single column eccentric press type ER 25 with safety cage -Press guard: Nilson -Clutch: pneumatic -Pressure capacity: 25 tons -Stroke rate: 50/100 strokes/min -Stroke: adjustable 12 - 80 mm -Table size: 520 x 360 mm -Projection: 190 mm -Punching fixture: Ø 30 mm -Insert height: 310 mm -Central lubrication -Dimensions: 1180/800/H1820 mm -Weight: 1418 kg
used
Just arrived: Baler Presona LP 80 VH1, year 2006 More images and a feature video will be available in early 2024. Specifications: Manufacturer: Presona Sweden Type LP 80 VH1 Year of construction 2006 Press force 78 t Drive power 55 kW Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight approx. 450-600 kg Throughput at bulk density of 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW: 20-27 t/h Binding 5-fold vertical Weight approx. 25000 kg
used
ID3011 Presto Presses CC40V 4.2 t Channel baling press, transportable in a hook lift container, pressing force 400 kN, channel cross-section 750×1100 mm, 15 KW drive power, with mobile extraction system Höcker Polytechnik Vacumobil V 180 Channel baler, transportable in a hook lift container, pressing force 400 kN, channel cross-section 750×1100 mm, 15 KW drive power, with mobile extraction system Höcker Polytechnik Vacumobil V 180
used
automatic baler Manufacturer: PRESONA Type: LP 50 EH 2 Year of construction: 2005 specifications: Press force: 50 t Specific pressing force: 6.31 kg/cm² Drive power: 37 kW Throughput: 340 m³/h Infill opening: 1,250 x 1,100 mm Channel format: 720 x 1,100 mm (H x W) Bale weights: up to approx. 400-550 kg Setting: 5-fold vertical Oil tank: approx. 600 ltr. capacity Bale weight : up to 550 kg depending on material and length Machine dimensions: approx. 8,200 x 2,800 x 3,900 mm (L x W x H) Machine weight: approx. 18 t
used
Spindelpresse - Spindle Press Spindle Press Krause Serial-No. KgS -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-
used
Used Mechanical C-Frame Press PRESSIX 130 ton used machine in excellent condition dimension table 700 x 1200 mm dimension ram 550 x 800 mm adjustable slide 110 mm
used
Key data: 72 kN, 60 mm, 200 mm
Very neat C-column press from TOX Pressotechnik Very good condition,
used
Profile height max. 160 mm Resistor stroke 100 mm Punching stroke 20 mm Pressing force 35 kN Compressed air connection 6-8 bar Weight approx. 350 kg
used
Description: Punching force: 6.5 kN Max. stroke: 30 mm Projection: 68 mm Approx. Onsite Dimension. (l x w x h): 500 x 500 x 600 mm, weight approx.: 80 kg
used
Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones
used
Mobile ham press, inside dimensions: 700 mm x 400 mm x 200 mm, total dimensions: 1180 mm x 500 mm x 1420 mm.
used
Albamat 550 V5 cardboard press with EKZ 1400 shredder RA2285 Type: Albamat 500 V5 / EKZ 1400 Year of manufacture: 2019 Condition: used Optical: traces of use Height: Press: 4450 mm without housing, 5550 mm with housing Width press: 2350 mm Depth press: 5613 mm Pressure: 60t / 600 kN Recommended maximum carton size: 960 x 630 x 420 mm. Depending on the housing, longer cartons are also possible Shredder feed opening 1435 x 990 mm Motor power: 22 kW baler, 1.1 & 7.5 kW shredder. Bale size: 1050 x730 x 1200 mm (depending on filling) Cycle time: 25 s, 3.3 t/h at 35 kg/m³ Dead weight: 8500 kg baler + 1000 kg shredder + feed hopper Start of baling process: Photocell Bale tying: 5 x 3.1-3.8 mm wire, fully automatic including: Oil cooler and oil heater for outside temperatures Free pusher Feed belt control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, German ...
used
Mobile press for cheese and tofu, 20 plastic forms, form dimensions: (2x) Ø 200 mm x 70 mm, total dimensions: 2440 mm x 400 mm x 1490 mm.
used
Pressure vessel with valve system, dimensions pressure vessel: ø 1450 mm x 3700 mm, dimensions valve system: 2500 mm x 950 mm x 1450 mm.
used
pressure:400 t distance between columns:1100 mm stroke:250 mm no. of strokes:25 - 75 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1100 x 965 mm capacity of ejector in table:30 t ejector stroke of ejector in table:80 mm capacity of ejector in ram:3 t stroke of ejector in ram:60 / 70 mm ram surface:980 x 800 mm column travel -side:800 mm ram adjustment:20 mm power capacity:80,0 + 5,5 kW weight:47,0 t Dimensions (WxDxH):3,5 x 3,3 x 6,0 m weight of switch cabinet:1,4 t dimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 m ejector in ram:hydraulic
used
pressure:400 t distance between columns:1060 mm stroke:450 mm no. of strokes:15 - 30 /min distance table/ram, max. stroke up, adjustment up:1160 mm table surface area:1000 x 700 mm capacity of ejector in table:2 x 16 t ejector stroke of ejector in table:125 mm Die cushion pressure in table:120 t Die cushion stroke in table:2 mm capacity of ejector in ram:2 x 4 t stroke of ejector in ram:100 mm ram surface:1000 x 700 mm column travel -side:630 mm power capacity:55,0 kW weight:50,0 t die cushion in table:2. station
new
Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...
new
Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. The machine ...
used
Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...
used
Press-Vite Buegel / Steam table 4 whirlpool hoods, 9000W Bj .2002, Pr12LP+ You buy a bell system Press Vite Buegel- / Steam table,with 4 hoe-adjustable whirlpool hoods, and 2 steam generators /en working width approx. 340 cm, 380VPr12LP - 9000W Bj 23.10.2002 Control GE VAT20 U20NOK7S BJ. 16.02.2002 Article number 17746; Please include requests;
used
Underfloor circular saw for aluminum made by EMMEGI type 500 SCAMasch. -No: 191446, year of construction 1987Technical specifications:max saw blade diameter: 500 mmSpeed: 2890 rpm.Cutting capacity 90 ° e.g.: 170 x 150 mmor e.g.: 100 x 250 mmCutting area 45 ° e.g.: 170 x 165 mmor e.g.: 130 x 150 mmCutting area 20 ° e.g.: 150 x 60 mmor z. W .: 90 x 90 mmWeight approx: 520 kgDrive power: 4.0 kWWith- Minimum quantity spraying device- 2 vertical clamps- Miter cutting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm
used
Hydropneumatic functioning Punching power: 50 kN Height: 140 mm
used
Pneumatic cylinder Manufacturer: TOX Type: K08. 81.200.12 Force 70 kN at 6 bar air pressure Total stroke: 200 mm, of which power stroke 12 mm max. with total stroke adjustment via hand-adjustable stop screw to the exact x-mass adjustment All information without guarantee
used
Format: A3 // Paper format: ca 31x45cm
used
used
direct imaging very good condition in western europe, Print numbers: 11mio, Format: 37 x 52
used
Hand Operated Press600mm x 600mm IPW heated platens300mm daylightEurotherm Controllers
used
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
used
2x Pressure tank single - walled with frame. 800 liter per tank 1600 total.
used
Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN
new
: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min voltage: 400 V / 50 V adjustment movement hydraulic up to: 120 mm motor speed: 1400 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1200 x 800 x 1750 mm Horizontal and vertical position, optionally two or three driven rollers, standard roller set, lateral guide rollers, foot pedal with safety button, according to CE, operating instructions, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 t throat: 250 mm stroke: 10 - 115 mm no. of strokes: 60 Hub/min dayligth: 285 mm distance table - lower edge of ram: 400 mm ram adjustment: 50 mm table-size: 500 x 750 mm ram head dimension: 340 x 440 mm work height max.: 700 mm table hole: 220 mm ram hole: 45 mm total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 1,4 x 2,5 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high ...
new
: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min adjustments: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1,2 x 0,8 x 1,75 mm The PB 50-3 H is a hydraulic profile bending machine: we produce thisprofilebender in Europe and deliver it directly from our stock. This hydraulic profile bending machine has a shaft diameter of 50 mm and 3 driven rolls. It is easy to switch between working with two or three driven rolls via the gearshift on the side of the machine. Operation of the profile bender is done by a foot pedal and with the pedals you choose the turning direction of the rolls. Our PB 50-3 H has a handpump to adjust the position of the upper / centre roll with hydraulics. The position of this upper roll can be read out on a scale and on the digital display (0,1 mm). Furthermore, our Profi Bend machines can work in ...
new
: 50 mm roll diameter: 148 mm revolutions per minute: 13,6/27,2 U/min total power requirement: 1/1,4 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 800x920x1450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 30 t throat: 180 mm stroke: 10 - 75 mm no. of strokes: 125 Hub/min dayligth: 225 mm distance table - lower edge of ram: 300 mm ram adjustment: 50 mm table-size: 360 x 560 mm ram head dimension: 260 x 340 mm work height max.: 670 mm table hole: 140 mm ram hole: 35 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,1 x 1,3 x 2,0 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This hig ...
used
pressure: 125 t throat: 300 mm stroke: 10 - 135 mm no. of strokes: 50 Hub/min dayligth: 315 mm distance table - lower edge of ram: 450 mm ram adjustment: 60 mm table-size: 600 x 900 mm ram head dimension: 315 x 550 mm work height max.: 800 mm table hole: 250 mm ram hole: 50 mm total power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,65 x 1,68 x 2,87 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. Thi ...
used
height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 16 t plate thickness: 4 mm no. of strokes: 70 Hub/min stroke speeds: 1,7 sec. working feed: 2/9.8 mm/sec return speed: 20 mm/sec piston stroke: 70 mm arm length:: 160 mm total power requirement: 2,2 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,8 x 0,45 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 10 t plate thickness: 4 mm no. of strokes: 26,6 Hub/min stroke speeds: 1,7 sec. total power requirement: 2,2 kW weight of the machine ca.: 190 kg dimensions of the machine ca.: 0,68 x 0,44 x 1,214 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,650 t diameter of piston: 180 mm working feed: 2 mm/sec return speed: 20 mm/sec pressure capacity max.: 200 bar toolpiece height min.: 200 mm dimensions of the machine ca.: 1150 x 750 x 1103 mm This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can b ...
used
pressure: 60 t throat: 235 mm stroke: 10 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 50 mm table-size: 470 x 700 mm ram head dimension: 310 x 410 mm work height max.: 670 mm table hole: 190 mm ram hole: 40 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,23 x 1,46 x 2,35 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This ...
used
pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...
used
There are two identical cylinders available, max. pressure: 6bar, total stroke: 100mm, power stroke: 12mm, max. press force: 39.9kN, fast approach force: 1700mm, retracting force: 1900N, weight: 20kg.
used
Double miter saw Make Pressta Eisele Type Norma LMS D 400 Masch. -No: 222633 Year of construction 1992 Technical specifications Cutting length 4000 mm Saw blade diameter 400 mm Speed 2890 rpm. with - Neig and tiltable - Digital length display Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.
used
Pneumatic punching machine make PRESSTA EISELE type KST 120Machine -No: 5161 built in 1991Technical specifications:Ram stroke: 40 mmRam force: 60 kNInstallation height tools: 250 mmProjection: 110 mmTable area: 200 x 150 mmPower transmission: 10Dimensions: 280 x 1480 x 425 mmWeight approx: 140 kgwith- underframe- 5 punching toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
There are two identical erecting stations available, connected load: 7kW, with documentation.
used
S. No.: AAC02761-0502-6018 REV 3 Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device - Destacker - RIP