precision lathe used for sale

X-axis: 330mm, Z-axis: 1650mm, max. swing over bed: 910mm, swing over cross slide: 560mm, distance between centers: 1820mm, standard turning diameter: 450mm, max. turning diameter: 610mm, max. turning length: 1650mm, bar capacity: 184mm, spindle speed: 12-1200rpm, spindle nose: A2-15, spindle bore: 200mm, spindle bearing diameter: 266mm, turret type: T10, square tool height: 32mm, boring bar holder diameter: 65mm, tailstock travel: 1400mm, quill stroke: 200mm, tailstock taper: MT5, tailstock quill diameter: 160mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, jog feed X-axis: 0-1260mm/min, jog feed Z-axis: 0-1260mm/min, spindle motor power: 30/37kW, X-axis servo motor: 4kW, Z-axis servo motor: 7kW, hydraulic pump: 2.2kW, lubrication pump: 0.004kW, coolant pump: 1.1kW, connected load: 52kW, coolant tank capacity: 300l, hydraulic tank capacity: 83l, lubricating oil tank c ...

faceplate diameter: 4000 mm swing diameter: 4600 mm turning height: 2650 mm workpiece weight: 100 t max. torque on the faceplate: 178,4 kNm faceplate speeds from - to: 1,8- 80 U/min feed stepless: 0,1 - 6000 mm/min z-axis: 1500 mm Control: Siemens 880T drive motor: 100 kW ram head dimension: 300 x 300 mm x-axis: R: 2500 / L: 2500 mm y-axis: 2900 mm z-axis: R: 200 / L: 1500 mm ram head dimension: 300 x 300 mm total power requirement: 69 kW weight of the machine ca.: - t dimensions of the machine ca.: 17,5 x 10.5 m - CNC control Siemens 880T - Coolant system - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2500 mm swing diameter over bed slide: 1400 mm turning length: 6000 mm Distance between centres: 5740 mm centre height: 1250 mm faceplate turning speed range: 4 - 400 U/min rapid traverse:: 200 mm/min faceplate: 2000 mm spindle bore: 200 mm face feeds: 700 mm upper slide-adjustment: 350 mm tailstock quill diameter: 320 mm max. workpiece weight between centres: 40 t Control: Siemens Sinumerik 8 T drive motor: 95,5 kW total power requirement: 125 kW weight of the machine ca.: 43 t dimensions of the machine ca.: 11,5 x 3,5 x 3,5 m Heavy duty high precision horizontal lathe with: - CNC Control Siemens Sinumerik 8T (CNC 6 axes) - 3-way Bed - hydraulic clamping system Rohm - Machine modified with 2000 mm face clamping plate - slide with two working positions - Sauter 4 side tool holder - circular turning unit - tailstock - chip conveyor - Rexroth Hydraulic suitable for both,  ...

Key data: 330 mm, 635 mm

Stock No.: 4042 LATHE Manufacturer: COLCHESTER, Type: STUDENT 2500 Serial No.: 307802, Year of manufacture: 2010 Specifications: Turning length 635 mm Center height 165 mm Turning over bed 330 mm Ø Spindle bore 40 mm Ø Spindle speeds 40-2500 rpm Spindle motor power 2.2 kW Accessories:                             Cooling water system                    Multi-Tool Holder                Various Tool Holders 2 pc Centering chuck                      Dimensions: Length: 2200 mm, Height: 1500 mm, Width: 1100 mm, Weight: 800 kg

Offer 26312 Technical data: - Largest circulation - Ø over bed 550 mm - via flat slide 310 mm - Turning length approx. 1500 mm - Travels - Z – axis 1600 mm - X – Axis 300 mm - Spindle holder according to DIN - Spindle bore 82 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 150 mm - Spindle speeds 80 - 3500 rpm - Rapid traverses X / Y - Drive 17 kW - with: - CNC control FAGOR - Hydr. Chuck clamping - electr. Handwheels - 8-fold tool station - man. Tailstock - Coolant device - Space requirement approx. W 4400 x H 2100 x D 2300 mm - Weight approx. 4400 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Handover: in its current condition as inspected -Condition: Problem with the lead screw -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Bulharian ZMM lathe C11MT/1500

Daewoo Puma V 550Year of manuf. : 2001 Control : Fanuc 18i-T Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 18i-TMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpChuck:3-jaw chuck

Daewoo Puma V 550Year of manuf. : 2005 Control : Fanuc 21i-TB Turning diam. : 730 mmTurning length : 750 mm____________Description:In General:Year of manufacture:2005Control system:Fanuc 21i-TBMax. speed:2,000 rpmTurning diameter:730 mmTurning height:750 mmX-axis:390 mmZ-axis:780 mmChuck diameter:600 mmTool turret:8 stationsEquipment:Chip removal:Chip conveyorCoolant supply:Coolant pumpTool measurement:Renishaw tool setterChuck:SMW Autoblok 3-jaw chuck

Conventional lead and draw spindle lathe from German manufacturer Heidenreich & Harbeck (VDF), Hamburg. The machine is equipped with a Multifix quick-change holder (type B) and comes with a wide range of accessories, including a tool cabinet and turning holder package. Electrical: Operating voltage: 380 V Control current: 220 V Frequency: 50 Hz Total current: approx. 4 A Equipment: Multifix quick-change holder type B Several turning holders and drill holders Forkardt 3-jaw chuck Ø200 mm tool equipment Tool cabinet Classic VDF feed and thread cutting gear

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 5000 mm spindle speed:: 1.6 - 315 U/min spindle motor: 75 kW spindle bore: 105 mm tailstock quill diameter: 280 mm quill stroke: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t feed: 0,18 - 160 mm/U thread - mm pitch: 1 - 192 mm thread - inch: 30 - 1/8 inch. total power requirement: - kW weight of the machine ca.: 38 t dimensions of the machine ca.: 10,7 x 2,2 x 1,9 m Fitted with: - DRO - Chuck, 1250 mm diameter - Tailstock - 2 centres - Removable grinding unit - Milling unit with ISO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conventional lathe Trens SN 710s BJ 2003

The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.

Machine with SIEMENS SINUMERIK840D control, main and counter spindle, Chip conveyor, oil mist separator, DMG-Automation WH10top. Main spindle ISM90: hollow clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91, ISM76 sub-spindle: partial hollow clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91, Gripping device with integr. Conveyor belt, autom. Protective cover, differential pressure spans. With pump rack for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant system, was connected to the control center. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece gripper for turret Auction-ID: A7-50158-7

Machine package consisting of: 1 CNC lathe WEISSER Univertor AS 400, built in 2005 1 CNC lathe WEISSER Univertor AS 400, built in 2008 1 CNC lathe WEISSER Univertor AS 400, built in 2008 CNC lathes with control SIEMENS SINUMERIK 840D, screw conveyor with chip crusher and pump-back station, NC steady rest SMW-SLU-1-OLD Ø10-70mm, 12-cavity tool turret SAUTER 0.5.440.220, NC tailstock, Artis breakage monitoring, pickup loading via pallet belt. Without coolant system, was connected to central supply. The machines can be demonstrated under power. Auction-ID: A7-50158-14

Tool holder: Capto C 5 MAPPS control system Renishaw HPRA (Manual Tool Presetter) Blum Laser Control Direct measuring system X;Y; Z; B Collet Chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece Conveyor Belt Bar Feeder Breuning Irco ILS-RBK-10012 Knoll belt filter KF10/500 / IKZ by milling spindle 7-stage up to 70 bar Chip Conveyor ConSep 2000 Auction-ID: A7-50158-6

Chip conveyor Spindle air conditioner HYFRA Coolant system Knoll Spindle head according to DIN 55026 - size 6 Spindle diameter in front bearings Travel x=300 mm Travel z=700 mm Tool holder VDI 40 Auction-ID: A7-50158-4

Vertical lathe with control Siemens SINUMERIK 840D, chip conveyor, Suction, infeed and discharge, reversible gripper. Auction-ID: A7-50158-10

OKUMA OSP-P300L-R control, with bar feeder TOP AUTOMAZIONI XFS370 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-22

FANUC Series 32i-MODEL B control, with bar feeder TOP AUTOMAZIONI XF365 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-20

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50065-454

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-256

DL-35M motorized turret, FANUC Series Oi-TF control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-13

12-position turret, 500GH spindle, MORI SEIKI MSD-501II control Excluding machining and tooling supports AVAILABILITY END OF JANUARY/BEGINNING OF FEBRUARY 2027 Auction-ID: A7-50204-14

FANUC Series 18i-TB control, with TOP AUTOMAZIONI FU350SX bar feeder - year 2024 Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-21

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-309

HEMPEL CKE semi-auto lathe 20 Long. max 2000 mm, max Ø 250 mm. Manual/auto controls, longitudinal carriage, 3-jaw chuck. Robust construction for wood or metal turning, suitable for prod. medium. Reliable and versatile machine. Auction-ID: A1-50215-39

FANUC Series 21i-T Control Excluding machining and tooling supports AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-24

FANUC Series 18i-TB control, IEMCA AUTOMATA 2.5 loader robot - year 2010 AVAILABILITY NOVEMBER 2026 Auction-ID: A7-50204-23

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50066-454

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-251

OKUMA OSP-U100L control, with bar feeder TOP AUTOMAZIONI XF370 Excluding machining and tooling supports COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-19

engine lathe, year 2007, CNC 840 D. Used machine. More info & price on IndustrialBuyer.

Traub TNK 65Year of manuf. : 2016 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):35 kWTorque (max.):120 NmBarcapacity:65 mmWorkpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:Motor spindle, integrated in tool carrier IISpeed:7.000 rpm:Power (max.):12 kWTorque (max.):22,5 NmChuck:Hainbuch Spanntop Kombi Axfix Gr. 42Toolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmToolcarrier II (X/Y/Z):Technology:Turret with 9 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmBackworking attachment:Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron)Driven Tools:5 stationsTooldrive:12.000 U/min, 6,7 kW, 5,3 NmEquipment/Accessory:Positionsensor:Direct Sca ...

sliding headstock CNC lathe, year 2015, 2368 operating hours, CNC 31i-MODELB. Used machine. More info & price on IndustrialBuyer.

Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi Ø over saddle: Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T

Additional technical specifications: • swing diameter over bed: 320 mm • swing diameter over slide: 150 mm • face slide: 185 mm • turning spindle bore diameter: 50,8 mm • spindle diameter at front bearing: 85 mm • tailstock quill diameter: 70 mm • quill taper: MK 5

Additional technical specifications: • Center distance over bed: 120 mm • Center distance over support: 60 mm

Additional technical specifications: • Center height over support: 80 mm • Center height over bed: 150 mm • Center Length: 450 mm

CNC bar-fed lathe, year 2003, CNC Fanuc 16i-TB. Used machine. More info & price on IndustrialBuyer.

sliding headstock CNC lathe, year 2018, CNC M80 Type A. Used machine. More info & price on IndustrialBuyer.

Equipped with chuck Forkardt; chuck diameter: 250 mm; equipped with digital reading unit; tailstock mount: MK4; machine is technically in good condition Auction-ID: A1-49785-11

Chuck diameter : 125 mm; tailstock holder MK2; machine is technically in good condition Auction-ID: A1-49785-5

Consisting of 2 x base body 150 x 150 mm; Including 6 type B chisel holders, length approx. 118 mm; unused Auction-ID: A1-49785-97

Equipped with frequency control and digital readout unit; including chisel support; tailstock mount: MK3; machine is technically in good condition Auction-ID: A1-49785-1

Consisting of 2 x base body 130 x 130 mm; Including 7 type B chisel holders, length approx. 118 mm; unused Auction-ID: A1-49785-96

Control Conventional Center height [mm] 225 Bed turning diameter [mm] 550 Carriage turning diameter [mm] 1600 Center distance [mm] 1050 Bed width [mm] 340 Spindle bore [mm] 52 Options Digital readout, Four-claw, Three-claw, Quick-change holder, Fixed glasses, Removable bed Auction-ID: A1-40982-48

Motor power: 7.5kW Center distance: 800mm Center Height: 160mm Auction-ID: A1-40982-18

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T