precise used for sale

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The DH exxactly. TRP is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. Version as a tabletop unit or on a mobile base For dimensional control in the machine room, in incoming goods or quality assurance For daily inspection of your own machine lines Smooth-running guidance for precise and fast measurement Safe measurement of long workpieces by one person Measuring range of choice 1,000 to 7,000mm (longer version possible on request) Easy-to-read large digital display "Lowest-Power-LCD" Power supply depending on the display unit battery or Mains connection 100-240 VAC; 50/60 Hz Dimension display at 1/10 mm Accessories: With interchangeable centering tips suitable for measuring hole distances Interface with data connection to a PC for logging  ...

bore capacity in steel (diameter): 40,0 mm throat: 320 mm bore stroke: 160 mm morse taper: 4 MK table:: 500 x 420 mm turning speeds: 90 - 1455 U/min total power requirement: 1,0 / 1,5 kW weight of the machine ca.: 450 kg. range L-W-H: 500 x 930 x 1870 mm characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sl ...

x-travel: 750 mm y-travel: 250 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1270 x 260 mm feed:: 24 - 402 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 175 - 520 mm rapid traverse: Z Achse 660 mm/min throat: 0 - 550 mm total power requirement: 2,2 kW weight of the machine ca.: 1.400 kg range L-W-H: 1715 x 1470 x 1660 mm Furnishing : - Universal milling head, adjustable to all angular positions - Swiveling control panel with ergonomically mounted switches - Heavy machine stand made of gray cast iron for vibration-free work - Dovetail guide with adjustable V-ledges in all 3 axes - Very smooth running thanks to ground gear wheels running in an oil bath - Positioning motor for z-axis included in delivery - Standard with automatic table feed in x and y axes - Precise surface-machined cross table with T-slots - Digital position display for x, y and z axes included i ...

: 3,0 mm ST 40 : 2,0 mm VA : 90° Grad blade length: 130 x 130 mm table:: 600 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 170 kg range L-W-H: 630 x 660 x 1270 mm Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe The data for this ad was created with ModulMWS - the sof ...

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

weight max.: 1200 kg. table turning speeds: 80 - 1600 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 20 - 800 mm range L-W-H: 520 x 470 x 390 mm Antrieb range L-W-H: dito mm Mitläufer volt: 230 V / 50 Hz weight: 56 kg Description: - Device for rotating and positioning Containers and cylindrical workpieces. - Unit in solid steel construction with polyurethane-coated metal rollers. - Precise speed adjustment by Frequency converter. - Foot switch for start / stop, 4-step operation. - Switch for right / left rotation. - Rotary knob for infinitely adjustable rotation speed. - Selector switch for rapid traverse / normal operation. - Switch with indicator light for operational readiness. - HF protected Scope of delivery: - 1 drive unit with control (integrated) - 1 follower The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 4 MK table:: 385 x 335 mm turning speeds: 80 - 2130 U/min total power requirement: 1,1 / 2,2 kW weight: 125 kg range L-W-H: 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyl ...

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: flat: 220 x 90 mm turning speeds: 3200 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 3,0 kW weight: 125 kg range L-W-H: 700 x 900 x 1500 mm Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

saw blade diameter: 350 mm cutting length: 430 mm cutting diameter: 135 mm turning speeds: 3.800 U/min Dust suction hood: 100 mm dimensions of saw-blade: 350 x 3,0/2,4 x 40 mm total power requirement: 3,0 kW weight of the machine ca.: 100 kg dimensions of the machine ca.: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shift cut on one side up to 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 430 mm - Cutting height at 90 ° = 135 mm - Cutting length at 45 ° = 310 mm - Cutting height at 45 ° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0 / 2.4 x 40 mm Z = 1 ...

saw blade diameter: 420 mm cutting diameter: 200 mm Cutting height at 45°: 140 mm hole of sawblade: 50 mm total power requirement: 5,0 kW Dust suction hood: 100 mm weight of the machine ca.: 310 kg. range L-W-H: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stops - Shifter cut on both sides (60 ° / 45 °), with fixed stops - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Furnishing : - 5 kW motor - Saw blade can be tilted via handwheel and worm gear (Schifters cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 volt / 5 kW (S6 / 40%) motor with brake and automat. Star-delta motor connection - Machine weight ap ...

total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software  ...

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

bending radius min.: 190 mm square edge steel: 20 x 20 mm flat steel: 100 x 7 mm round bar steel: 22,0 mm L-beam: 100 x 10 mm weight of the machine ca.: 34,0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths Bending power cold warm Flat steel 100 x 7 mm 100 x 15 mm 65 x 12 mm 75 x 20 mm Round steel 22 mm 27 mm Square steel 20 x 20 mm 25 x 25 mm Angle steel 100 x 10 mm 100 x 15 mm scope of delivery - Bending plate sharp / round - Stepless angle stop - Terminal block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software soluti ...

saw blade diameter: 410 mm cutting diameter: 170 mm turning speeds: 3.500 U/min Dust suction hood: 100 mm dimensions of saw-blade: 420x3,2/2,4x40 mm total power requirement: 3,0 kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,6 x 1,0 x 2,0 m - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM cir ...

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

La San Marco NEW 105 MULTIBOILER 3G portafilter machine espresso machine Touch (6) factory price 11,157 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting, which can be easily adjusted via the touch screen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display provides a range of information that is of great benefit to the operator. The illumination of the workplace with adjustable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Groups: 3  ...

bore capacity in steel (diameter): 15 / 18 mm throat: 180 mm bore stroke: 80 mm turning speeds: 200 - 4000 U/min : 250 x 220 mm distance drilling head - clamping area: max. 380 mm total power requirement: 1,1 / 400 kW / Volt column diameter: 65 mm tool taper: MK 2 weight of the machine ca.: 0,08 t dimensions: 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 8020 mm : 2 mm : 1.5 mm : 8 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS millmeter precise adjustment of the clamping beam BMS MULTI-Touchcontrol electric powered rotary shear electronic depth stop flexible material supports inclined bending beam optimized geometry of the clamping beam safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on request Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with Modul ...

: neu : 12 - 14 Wochen ab Auftrag : Deutschland : 6400 mm : 2 mm : 1.5 mm : 6 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS millmeter precise adjustment of the clamping beam BMS MULTI-Touchcontrol electric powered rotary shear electronic depth stop flexible material supports inclined bending beam optimized geometry of the clamping beam safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on request Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with Modul ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

sheet width: 3100 mm plate thickness: 20 mm distance between columns: 3100 mm no. of strokes: 6-8 Hub/min table height: 880 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 500 l cutting angle: 2,7 ° thickness at Niro-steel: 13 mm rear stop: 200 mm/sec. total power requirement: 37 kW weight of the machine ca.: 23 t dimensions of the machine ca.: 4,15 x 2,49 x 2,6 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created w ...

PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressing ...

cutting diameter: 380 mm saw band length: 4800 mm cutting width: 520 mm : 380 x 380 mm Capacity 90° rectangular: 520 x 380 mm : 300 mm : 300 x 300 mm Capacity 45° rectangular: 300 x 380 mm dimensions of saw-band: 4800 x 34 x 1,1 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,33 t dimensions of the machine ca.: 2,85 x 0,93 x 1,66 m Product Description Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.B ...

cutting diameter: 320 mm saw band length: 3660 mm cutting width: 440 mm Capacity 90° rectangular: 440 x 220 mm : 320 mm speed: 20 -100 m/min main drive: 1,5 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 3660 x 27 x 0,9 mm total power requirement: 2,0 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1,9 x 0,85 x 1,3 m Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.Blade guides with rollers and carbide pads provide pr ...

DIRECTLY FROM THE PRINT SHOP Offer consisting of: Heidelberg Perfect Binder Eurobind 1300 PUR-D 4-pliers perfect binder, glue type PUR-D - Short set-up times due to high automation - thin and precise glue application due to nozzle application system -Touchscreen Specifications: - Capacity: 1300 cycles/h -Sizes: Block height: 145-360mm Block width: 120-300mm Block thickness: 2-45mm Grammage: 60-170g/sqm Envelope width: 242-680mm Envelope height: 145-370mm - Envelope grammage: 120-300g/sqm - Milling depth/ adjustable: 0.3mm -Energy requirement: Perfect binder: 400V +/-5%, 50 Hz, 3ph+N+PE/ 20A/ 9,9kW Glue vapor extraction: 400V, 50Hz, 3ph+PE/ 16A/ 1.5kW PUR Premelter: 400V, 50Hz, 3ph+N+PE/ 32A/10kW -Metrics: Bookbinding: Length, closed hood: 4085mm Length, open hood: 4230mm Width, closed hood: 2275mm Width, open hood: 2500mm Height, closed hood ...

cutting diameter: 1110 mm saw band length: 10500 x 67 x 1,6 mm cutting width: 1110 mm : 1110 mm : 1110 x 1110 mm table height: 545 mm speeds steplessly adjustable: 20 x 100 m/min total power requirement: 15,5 kW weight of the machine ca.: 10,44 t dimensions of the machine ca.: 4800 x 1500 x 2975 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies coolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 10 mm distance between columns: 3100 mm no. of strokes: 10 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 300 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,94 x 3,56 x 2,09 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

cutting diameter: 1110 mm saw band length: 10500 x 67 x 1,6 mm cutting width: 1110 mm : 1110 x 1110 mm table height: 545 mm capacity 90 degrees: round: 1110 mm capacity 90 degrees: square: 1110 x 1110 mm cutting speed: 20 - 100 m/min : 1020 mm : 675 mm : 675 x 675 mm Capacity 45° rectangular: 675 x 1020 mm total power requirement: 10 kW weight of the machine ca.: 5,86 t dimensions of the machine ca.: 4,5 x 1,7 x 2,7 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies coolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. The data for this ad wa ...

cutting diameter: 560 mm saw band length: 6000 mm cutting width: 750 mm table height: 590 mm : 560 mm Capacity 90° rectangular: 410 x 560 mm : 410 mm : 410 mm Capacity 45° rectangular: 410 x 560 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 6000 x 41 x 1,3 mm total power requirement: 5,22 kW weight of the machine ca.: 2,045 t dimensions of the machine ca.: 3,4 x 1,0 x 2,05 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechanic blade tension ?swa ...

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

cutting diameter: 460 mm saw band length: 5200 mm cutting width: 650 mm : 460 mm Capacity 90° rectangular: 650 x 460 mm : 380 mm : 380 x 380 mm Capacity 45° rectangular: 380 x 460 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 5200 x 41 x 1,3 mm table height: 590 mm total power requirement: 4,67 kW weight of the machine ca.: 1,52 t dimensions of the machine ca.: 3100 x 1000 x 1800 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. inverter hydromechanic blade tension ...

cutting diameter: 360 mm saw band length: 5000 mm cutting width: 610 mm speed: 20 -100 m/min main drive: 3 kW hydraulic pump: 0,55 kW coolant pump: 0,12 kW dimensions of saw-band: 5000 x 34 x 1,1 mm : 360 mm : 360 x 360 mm Capacity 90° rectangular: 610 x 360 mm : 360 x 360 mm : 360 x 360 mm Capacity 45° rectangular: 490 x 360 mm : 360 mm : 360 mm : 610 x 360 mm capacity 60 degrees: round: 3,67 mm capacity 60 degrees: square: 360 x 360 mm capacity 60 degrees: flat: 360 x 360 mm band speed: stufenlos 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,47 t dimensions of the machine ca.: 2,75 x 1,21 x 1,87 m This twin-pillar horizontal bandsaws have been designed to provide a low cost, compact and rigid machine.The bow is constructed in heavy gauge steel. It is mounted at two chromed and grinded pillars offering a strong rigid sawframe. This design provides a high ...

sheet width: 4000 mm plate thickness: 13 mm distance between columns: 4100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 400 l cutting angle: 2,3 ° total power requirement: 30,75 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 4,95 x 3,68 x 2,24 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...

KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...

sheet width: 3000 mm plate thickness: 13 mm distance between columns: 3100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 400 l cutting angle: 2,3 ° total power requirement: 30,75 kW weight of the machine ca.: 11,2 t dimensions of the machine ca.: 3,95 x 3,64 x 2,10 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 420 mm : 320 x 320 mm Capacity 90° rectangular: 420 x 200 mm : 280 mm : 260 x 260 mm Capacity 45° rectangular: 280 x 200 mm cutting speed: 20 - 100 m/min work height max.: 640 mm total power requirement: kW weight of the machine ca.: 1,62 t dimensions of the machine ca.: 1,8 x 0,82 x 1,19 m This bandsaw have been designed to give a low cost compact and rugged machines.Constructed in heavy gauge steel, it offers a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standar ...

sheet width: 2000 mm plate thickness: 10 mm distance between columns: 2100 mm no. of strokes: 10 Hub/min table height: 820 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 10 Stück oil volume: 200 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,2 x 3,45 x 2,03 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

FARO EDGE 2.7 M coordinate measuring arm was built in 2014. The efficient and productive portable measuring arm verifies the quality of workpieces of any shape by measuring components in 2D and 3D with an accuracy of ± 0.017 mm. The mounted measuring head and the non-contact laser scanning function also allow for comparative analysis of individual components and assemblies with CAD files. The machine has been designed with convenience and ease of use in mind, as evidenced by the excellent weight distribution and balance maintained. The FARO EDGE measuring machine consists of: – a 2.7 metre long measuring machine with base plate and probe, – battery and cables, – a removable handle, – a non-standard case (hard case). Applications of the FARO EDGE 2.7 M machine - measuring and verifying the dimensions of machine parts of any shape - measurement of shape deviation and c ...

cutting diameter: 540 mm saw band length: 6000 mm cutting width: 750 mm table height: 695 mm cutting speed: 20 - 100 m/min : 540 mm : 540 x 540 mm Capacity 90° rectangular: 750 x 540 mm : 540 mm : 540 mm : 600 x 540 mm : 510 mm : 450 mm Capacity 45° rectangular: 450 x 540 mm capacity 60 degrees: round: 270 mm capacity 60 degrees: square: 250 mm capacity 60 degrees: flat: 250 x 540 mm total power requirement: 4 kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 3,0 x 1,3 x 2,13 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cu ...

sheet width: 200 mm plate thickness: 6 mm distance between columns: 2100 mm no. of strokes: 16 Hub/min table height: 760 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm down holder: 10 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 3,1 x 3,43 x 1,65 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...