precast concrete plants used for sale

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 30,660 mm Number of fields / row of shelves: 11 pcs á 2,700 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 09 pcs. Total pallet spaces: 99 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 12x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profilem.: P 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 44 ...

Offer 7 paint mixing buckets mixing tank agitator tank Drais 300 l rollable (for e.g. Drais color mixing unit (dissolver) type RN 218) Fig. 1-7 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories for the Drais-Farbmischwerk type RN 218 (sold). Technical data (partly estimated or from reference plants): Manufacturer: Drais Designation: Paint mixing bucket Mixing tank Agitator tank Year of construction: probably 1985 Material: sheet steel Inner diameter: 80 cm Height: 80 cm (overall) Weight: approx. 130 kg Quantity: 7 pieces with paint residues. Also available in parts for 290€/piece. further assets from this plant: -for material separation centrifuge SZB0 1000C 960 1/min 6 loads/h The centrifuge was part of a wallpaper production plant. After cleaning the tools, it is used to separate the plastisol from the  ...

90 running meters pallet rack Stow Used goods, very good condition, see pictures Height 6 m Depth 100 cm Beam length 2.70 m Load/tray 3000 kg Frame blue Carrier orange Negotiation price: € 8.650,-- net ex stock Offer consists of: + 33 frames pre-assembled, 12t field load, depth 100 cm, height 6 m + 192 beams, length 2.7 m, 3000 kg load/compartment + 384 pcs hanging devices + 132 pcs concrete anchors Payload shield Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous ar ...

Unused Düchting Centrifugal Pump Type HK200x6 Year of construction 2015 Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 300 m³/h H 490 m N 1480 1/min P 560 kW Further Düchting pumps in stock Applications: Conveyance of contaminated, chemically neutral or aggressive liquids with up to 10% solids content. Main water drainage in mining Secondary water drainage and mine air cooling in mining Pressure boosting systems in industrial processes Water supply and water treatment plants Condensate conveying Mineral fertilizer industry Oil & Gas Applications LHK125x6 HK150x11 Q150m³/h H730m n1485 1/min P430kw HK250 HPXU100x10 Q90m³/h H250m n1485 1/min P100kw HK150x5 Q163m³/h H325m n1485 1/min P210kw HK150x9 Q220m³/h H435m n1485 1/min P435kw HPXU150-200x5 Q150m³/h H665m n1485 1/min P415kw HK200x6 Q480m³/h H470m n1485 1/min P792kw HK200x4 Q500m³/h H265m n1485 ...

60 m tyre rack Nedcon New & used goods, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/tray 1000 kg Frame Blue Strap blue lacquered Negotiation price: € 5.250,-- net ex stock Offer consists of: + 16 frames pre-assembled, depth 50 cm, height 3 m + 90 beams, length 3.7 m, 1000 kg load/compartment + 180 pcs hanging devices + 64 pcs concrete anchors Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous articles from various areas broom-clean eviction ...

15 m tire rack Nedcon New & used goods, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/tray 1000 kg Frame Blue Strap blue lacquered Negotiation price: € 1.150,-- net ex stock Offer consists of: + 4 frames pre-assembled, depth 50 cm, height 3 m + 18 beams, length 3.7 m, 1000 kg load/compartment + 36 pcs hanging devices + 16 pcs concrete anchors Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are looking for or constantly offer numerous articles from various areas broom-clean evictions  ...

We offer a Peri Trio formwork system 172,30m² complete with accessories. The elements are all in top used condition, or covered with new Finply formlining. Fair-faced concrete class 2/3 possible without any problems. Elements TR 270 12 Element TR 270 x 240 8 Element TR 270 x 120 8 Element TR 270 x 90 4 Element TR 270 x 72 4 Multipurpose element TRM 270 x 72 10 Element TR 270 x 60 8 Element TR 270 x 30 new formlining 2 formwork elements TR 270x 24 new formlining 6 corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 compensating bars TAR 85 12 Scaffolding bracket TRG 80 2 displacement hooks MAXIMO 1.5 t 1 transport hanger MX new 2 reusable containers steel 80 Prestressing steel DW 15/0,85m new 160 mother joint plates, new purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair cond ...

45 running meters pallet rack SSI Schaefer Palflex incl. insert grid Used goods, good condition, see pictures Year of construction 2006 Height approx. 6.5 m Depth 120 cm Field load 12000 kg Galvanized frame Carrier red Insert grid included! 2 grids per 2.7 meter beam length Negotiation price: € 6.590,-- net ex stock Offer consists of: + 17 frames pre-assembled, depth 120 cm, height approx. 6.5 m + 96 beams, length 2.7 m, 1500 kg load/compartment with evenly distributed load +192 pcs Hanging Arresters + 96 galvanized insert grids for 48 levels of 2.7 meter beam length + 68 pcs concrete anchors Stress plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters pallet racks from numerous manufacturers in stock. (Changes and  ...

Technical data and further information: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,900 mm Number of fields per row of shelves: 01 pcs. á 2,700 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendz. galvanized Profile type: P 115 Stand profile feature: 100 x 100 x 2.50 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 2,300 mm high 500 mm deep 04x pallet racking trusses, new Material color: blue Box profile: 110 x 50 mm Agraffe: 5 HK (hook) clear width: 2,700 mm load per pair of trusses 3,000 kg, at the same time. distributed load 02x push-through safety devices, second choice Consisting of: 01x C-profile, second choice Mate ...

Offer Double-sided adhesive tape 3M GT6008 Acrylic Foam Tape 267 rolls of 800m 5 mm wide in cartons on pallets (picture 1-3) The double-sided tape is sold by our customer due to a change in business. It is ready for use and can be kept until August 2024. 3M's GT 6008 tape is made of a medium density grey acrylic foam. Manafacture: 3M Type: GT6008 F Number of Rolls / Packages: 267 Length on the roll: 800m Width 5mm Colour: grey Thickness: 0.8mm Temperature resistance: short: 160C long: -40 to 120°C Packed on 15 pallets Weight: in total approx. 1650 kg Features (info from the web): -good adhesion to a variety of automotive surfaces -good internal strength -excellent long-term stability -very good adaptability to the surfaces to be bonded -uniform viscoelastic property -Extremely durable connections Adhesive tape 3M GT6008 Acylic Foam Tape 64 rolls a. 900 ...

Offer Double-sided adhesive tape 3M GT6008 Acrylic Foam Tape 64 rolls of 900m 12 mm wide in cardboard boxes on pallets (picture 1-2 samples, 3 Total stock & 4-7) The double-sided tape is sold by our customer due to a change in business. It is ready for use and can be kept until August 2024. 3M's GT 6008 tape is made of a medium density grey acrylic foam. Manafacture: 3M Type: GT6008 F Number of Rolls / Packages: 64 Length on the roll: 900m Width 12mm Colour: grey Thickness: 0.8mm Temperature resistance: short: 160C long: -40 to 120°C Packed on 4 pallets Weight: 880 kg in total Features (info from the web): -good adhesion to a variety of automotive surfaces -good internal strength -excellent long-term stability -very good adaptability to the surfaces to be bonded -uniform viscoelastic property -Extremely durable connections Adhesive tape 3M GT6008 Acyl ...

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

Dismantled CONCRETE PLANT Easy to operate and ready relocation. Horizontal concrete plant type «ROME CZ 5P24B» with a capacity of 65 m3 / h of fresh concrete or 45 m3 integrated vibrated concrete with additional equipment + heating system ACV. The concrete unit consists of units: - storage boxes for gravel 5 units 150m3/unit (galvanized version), - vibration system, mounted on two outlet cones each consisting of a 260 W vibrator mounted on a special plate with all the necessary electrical equipment - scale for gravel, 4 units, maximum load capacity 2400 kg, 12m3 geometric volume each, vibrator 180 W - scale for cement, maximum load capacity 600 kg, 3 units weighing cells, EC certificate, volume of the bunker 480 L, pneumatic hood fi 323 mm, pneumatic vibrator VPC 1 piece - compressor and pneumatic equipment, volume 270 L, air flow 462 l/min, compressor 3 kW - planetary m ...

New washer/dryer Manafacture: Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be laundered, glassware and parts of bottling plants Size of the chamber 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP

50 m pallet rack Jungheinrich type MPB new goods New product, see pictures Height 9 m Depth 110 cm, blue Beam length: 2.7 m, yellow Carrier with load / compartment 3000 kg Negotiable price: € 13,290,-- net from stock Offer consists of: + 19 pcs frame pre-assembled, depth 110 cm, height 9 m + 144 pcs carrier, length 2.7 m, 3000 kg load/compartment + 288 pcs suspension locks + 78 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue, infills galvanized. 3.5 m to 9 m heights in stock. Field load 12 tons. Strap yellow. Goods are in stock. Transport and assembly possible on request. Viewing is possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Ch ...

We offer you a used pallet racksystem manufacturer Jung Heinrich for sale. Technical data on the pallet racking system: Shelving system: Jung Heinrich Type: T Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,600 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Technical data on volume: Number of pallet slots per field: 12 pcs. Number of pallet slots per row: 60 pcs. Total number of pallet slots: 60 pcs. based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 450 kg Included are: 06x Pallet rack, used Material color: blue Stand profile: 100 x 65 mm Incl. transverse and diagonal st ...

We offer you a used pallet racksystem manufacturer Redirack for purchase. Technical data on the pallet racking system: Shelving system: Redirack Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 16,798 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Included are: 06x Pallet rack, used Material color: blue Stand type: H Stand profile: 83 x 83 x 15 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 1,500 mm high 1,050 mm deep 20x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head traverse clear width: 3,260 mm max. load per pair of trusses 2,500 kg at the same rate. distributed load  ...

CEMENT PLANT BATCHING PLANT CONC. BATCH PLANT 210M3/HR-200KW BP210CMPH (Type I Portland Cement shall be used) Make: Hosan Engineering Co.,Ltd.Edit Make Model: HSBP-210MS Cement Plant control panel Silo tank- 2 units compressor water tank - 2 units Cement mixer Crusher plant Crusher 1 conveyor - 3 units crusher w/ wheels control panel Crusher 2 conveyor - 4 units crusher w/ wheels Control panel Concrete Hollow Block Plant Maker: Harex Eng’g Co. Ltd. Model: H212 mixer conveyor - 2 units Hollow block molder/press control panel Capacity: 210 m/ Hr Make: Hosan Engineering Co.,Ltd. Model: HSBP-210MS Capacity: 210 m/ Hr

We offer you a used pallet racksystem manufacturer Redirack for purchase. Technical data on the pallet racking system: Shelving system: Redirack Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 80,315 mm Number of fields per row of shelves: 24 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Included are: 25x Pallet rack, used Material color: blue Stand type: H Stand profile: 83 x 83 x 15 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 1,500 mm high 1,050 mm deep 96x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head traverse clear width: 3,260 mm max. load per pair of trusses 2,500 kg at the same rate. distributed load  ...

NOE Alu L A lightweight system that can be used to work independently of the crane. The NOEalu L convinces as a real hand formwork, due to its low weight, high flexibility and durability. The low weight of 21 kg/m² Ensures long-term productive Work, even without a crane. The sturdy construction will meet the to cope with the stresses of everyday construction site life. Flexible thanks to a wide, Vertical or horizontal table assortment. The Alulock connects the various components of the system as reliable as it is escaped. The individual panels allow a concrete pressure of up to up to 60 kN /m². NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently productive work, even without a crane ...

TECHNICAL SPECIFICATIONS (impact crusher) Manafacture: SBM Designation: Impact crusher Version: Semi-mobile Type: RHS 12/12/4 Year of construction: 1998 Drive cable: 160 kW Drive type: V-belt Throughput: 130 t/h Inlet opening (width/depth): 1,264 / 1,047 mm Maximum feed size: 800 mm Number of blow bars: 4 pcs. Rotor diameter: 1,280 mm Rotor speed: 33.3 m/s Weight impact crusher: approx. 15,500 kg SPECIFIC COMMENT - Selective crushing of soft to medium-hard natural stone, reinforced concrete and rubble - Without grinding track - Can also be used as a secondary crusher OVERALL SYSTEM CONSISTING OF: - SBM impact crusher RHS 12/12/4 - Feed hopper with vibrating chute - Bar sieve for pre-screening - Outlet channel - Discharge conveyor - Overbelt magnet - Stockpile conveyor - SIMENS Simatic OP7 controller -Structural steelwork - Generator set - Optionally a ...

Shelf stand: 9,650 mm x 1,100 mm / Clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 20,020 mm Number of fields / row of shelves: 07 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Pallet spaces per row: 126 pcs. Total pallet spaces: 126 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg The scope of delivery includes: 08x Pallet racking stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-as ...

Shelf stand: 9,650 mm x 800 mm / clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 17,180 mm Number of fields / row of shelves: 06 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 9,650 mm high 800 mm deep 60x pallet racking beam, new Material colour: Ral 2004 orange Box profile: 130 x 50 mm Truss type: PNB 0413 S355MC Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,000 kg at the same time. distributed  ...

Shelf stand: 9,650 mm x 1,500 mm / clear width: 2,700 mm Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 22,860 mm Number of fields / row of shelves: 08 pcs á 2,700 mm Number of levels plus floor level: 05 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material color frame: sendz. galvanized Material color truss: blue Profile dimensions: 140 x 80 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 9,650 mm high 1,500 mm deep 80x pallet rack traverse, new Material colour: Ral 2004 orange Box profile: 130 x 50 mm Truss type: PNB 0413 S355MC Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,000 kg at the same time. distrib ...

Stand 2250x1000mm/ trusses 2705mm/ shelf load 3,30 to Technical data for the pallet racking system: Shelving system: Duwic | Cornix Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 25,345 mm Number of fields / row of shelves: 09 pcs á 2,705 mm Number of levels plus floor level: 02 pcs. The scope of delivery includes: 10x pallet racking stand, used Material color: blue Profile dimensions: 100 x 80 x 3.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,250 mm high 1,000 mm deep 36x pallet rack traverse, used Material color: orange Box profile: 140 x 50 mm Truss type: L517 Agraffe: 3 HK (hook) Clear width: 2,705 mm max. load per pair of trusses 3,300 kg at the same time. distributed load 72x locking pins, used Version: complete. galvanized To secure ...

Peri Trio 552m² Peri TRIO is a craneable formwork system that can be used upright or horizontally. Thanks to the patented BFD directional lock, all element connections are made flush, aligned and tight.  The only necessary connecting part for normal element joints, external/inner corners, articulated corners, shims up to 10 cm or the clamping of squared timbers is the BFD directional lock (can be operated with one hand). With just a few element widths, all floor plans can be formed. The powder coating prevents the concrete from adhering and allows for easy and quick cleaning. Maximum allowable fresh concrete pressure: 80kN/m2 Peri Trio 552m² Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal e ...

Service - Creation of an offer for powder coating plant from Romer. directly from the manufacturer romer-Germany Manufacturer of powder coating plants and industrial furnaces, plant construction Delivery time approx. 10 to 16 weeks Shipping costs must be charged separately.

lying, insulated stainless steel tank with 2 concrete brackets (25 m high) Volume: 20 m3 Dimensions: 3.30 m x 3.00 m long

Key data: 90 , 10 , 13

High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Load counter: 24.138 h Weight: 2300 kg Year of Build: 2012 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Ter Braak Type: depowder drum for mogul plants electrical: 380V, 3ph We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau unpacked

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

We offer a Doka Framax Xlife plus 163.67m² with a 65% discount. Original value: €112,280.00 - Special net price €39,298.00 + VAT Complete with accessories on request. Formwork completely cleaned, checked and sorted. Formlining exposed concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value operations. Piece designation 1 Framax Xlife plus Element 2,70x3,30m 8 Framax Xlife plus Element 1,35x3,30m 8 Framax Xlife plus Element 0,90x3,30m 6 Framax Xlife plus Element 0,75x3,30m 5 Framax Xlife plus Element 0,60x3,30m 2 Framax Xlife plus Element 0,55x3,30m 17 Framax Xlife plus Element 0,45x3,30m 1 Framax Xlife plus Element 0,30x3,30m 4 Framax Xlife plus-Element 1,35x2,70m 2 Framax Xlife plus-Element 0,90x2,70m 1 Framax Xlife plus-Element 0,75x2,70m 6 Framax Xlife plus-Element 0,60x2,70m 2 Framax Xlife plus-Element 0,55x2,70 ...

Key data: 3100 mm, 6 mm

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Key data: 588 , 400

2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. These generators were only run on natural gas. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 3,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply : Engine, alternator, frame, control panel, switch panels, gas line, radiators, wiring and other accessories. Pric ...

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

90 Lfm pallet shelf Shepherd PR600 used goods, see pictures Height 8 m Depth 105 cm Carrier length 3 m Load/tray 2550 kg Field load 11500 kg Frame galvanized Wearer orange Negotiated price: € 7,080,-- net from stock Offer consists of: + 30 pcs frame pre-assembled, depth 105 cm, height 8 m + 232 pcs. carrier, length 3 m, 2550 kg load/compartment + 464 pcs mount fuses + 60 pcs concrete anchors Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as intermediate sale reserved! See our terms and conditions, all prices excl. VAT from stock) Purchase /sale We are looking for or offer continuously numerous items from various are ...

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

description: Various scond hand crate conveyors Krones/ KHS/ Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 440m used case conveyors (predominantly Krones,KHS, and Gebo). Available immediately. When buying items we always pay attention on famous manufacturers an tough quality . Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of cou ...

Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Steel construction, machine platform, used steel scaffolding Manufacturer: EHINGER IMPIANTI Dimensions approx. 4.8 x 4.6 x 8.7 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Steel construction, machine platform, used steel scaffolding Manufacturer: EHINGER IMPIANTI Dimensions approx. 8.8 x 4.6 x 9 m The system has already been dismantled. Any machines and devices that can be seen in the pictures are not part of the scope of delivery. We only offer the steel construction here. The construction was part of a glass recycling plant in which foam glass bulkowas was manufactured. We sell the complete plant with belt furnaces, cup plants, silos, crushers and mills. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Liquid fertilizer / AHL / ASL - Tank tank storage tank storage tank a used storage tank 100,000 litres for storage of liquid fertilizer / AHL / ASL with a brand-new plastic inner shell. The container corresponds to DIN 6616, has 2 saddle feet, is professionally emptied and cleaned inside, incl. ladder. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. ASL (ammonium sulfate solution) is a sought-after liquid fertilizer used in drying plants during the drying of liquid fermentation residues and during exhaust air purification. Due to the corrosive properties of the bearing medium, ASL containers require an inner plastic shell. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore AHL for the storage of ...

Fully automatic system with 1 vibrating press locksmith BH 30 For production e.g. : - Concrete blocks, bricks, partition bricks - Soundstones -Curbs - Fireplace stones -Gutter - Ceiling stones, etc. - Stationary vibropress BH 30 with two filling parts for two-layer products - Chain conveyors for fresh side - Sliding tracks for dry side - 1x mast and 1x lowering scaffold - Kuboter for the removal of hardened stones from the return transport on the parcel transport - Production pallets 1400x800mm – 0 pcs Product height : from 55 to 550 mm The new automation : Siemens S7 The control of the vibrator with frequency converter Incl. approx. 5 pcs, different shapes Fully automatic system with 1 vibropress locksmith BH 30 for production of for example concrete blocks, wall stones, partition stoner -Sonic Stones -curbs -fireplace stones -Gutter -ceiling stones -stationa ...

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale