precast concrete plant used for sale

The fully-automated carbonisation plant produces the CO2-amount of beer, beer mixing beverages, soft drinks, mineral water and wine in a continuous and high-precision way by precise controlled dosing of CO2., Capacity beer feed: 20000 l/h, Capacity degassed water: 10000 l/h, Capacity blended beer: 30000 l/h , CO2-supply: 8 barg, Power: 23 kW, Current: 50 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, Length: 2790 mm, Width: 1250 mm, Height: 2440 mm, Weight: 500 kg, Operation / Control: fully automatic, electrical cabinet with control panel, Material: stainless steel, Features: Flange connection: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonisation section; flow measurement; Anton Paar original wort, alcohol and CO2 measurement; pressure gauge; sampling taps; various other valves

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings, Additional title: 3-tank system with heating elements, aeration devices and temperature control, Volume and dimension per tank: 2000 l Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm, Length: 4500 mm, Width: 1700 mm, Height: 2100 mm, Operation / Control: electrical box with buttons, switches and temperature controls, Material: stainless steel, Position: free standing, Base construction: standing tanks with lids, on pipe feet, Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box

Filling capacity of the line bottle filler: 7500 l/h , Features: Dosing pump as plunger pump (Bran & Lübbe, yp DMS-G, 30 (diameter) x 60 mm stroke, 326 l/h 0.5 atü), 4 inlets (NW 25, NW 50, NW 15 and NW 32)

System for the pressureless production of aqueous chlorine dioxide solution This system enables the pressureless production of an aqueous chlorine dioxide solution. The two starting materials are fed into a reaction vessel one after the other via peristaltic pumps. The liquid level in the vessel is monitored by a level probe, ensuring a correct mixing ratio of 1:1. The operating time of the peristaltic pumps is also monitored and controlled by the software to ensure precise dosing. After the reaction time, the resulting chlorine dioxide solution is rinsed with water in the storage tank and then dosed to the point of use using a diaphragm dosing pump and a dosing valve. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, ...

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control, Additional title: refrigerant ammonia, Brew water flow: 5 m³/h 2 bar, Ice water flow: 15 m³/h 2 bar, Refrigerant capacity: 85 kg Ammonia, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Operation / Control: Siemens S7, Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pum ...

Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display, Additional title: Reverse osmosis for desalination of raw water, Flow rate: 6000 l/h depending on the blending quantity, Max. operating overpressure: 14 bar, Recovery appr.: 82 %, Water: 5 - 7 m³/h; 1 - 10 bar, Operation / ...

Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m³ - Mixing and equalisation tanks 2, 40 m³ - Mixing and equalisation tanks 3, 80 m³ - Bioreactor 1, 240 m³ - Bioreactor 2, 240 m³ - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m³ - Secondary sedimentation tank 2, 100 m³ - Thin sludge tank, 70 m³ - Thick sludge tank, 90 m³ - Sludge dewatering 1 and 2 - Precipitant tank, 25 m³ - Various process water pumps, Bioreactor capacity 2 x: 240 m³, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; t ...

CIP tank with 4 separate tanks for water, lye, acid and disinfectant. The system consists of: - 4 tanks with various fittings - Feed and return pumps - 3 diaphragm dosing pumps - Pipework, pneumatic disc valves - Level sensors, in-line conductivity measurement, full and empty level probes, flow monitors., Additional title: Cleaning system with 4 vertical stainless steel vessels, Volume: 1270 l Caustic tank, acid tank, disinfectant tank, Operation / Control: Control cabinet for electrical and pneumatic systems, Bischof CPU, , Material: Tanks made of V4A or V2A stainless steel, Features: 4 x CIP tanks, 3 x diaphragm metering pumps, 3 x pneumatic diaphragm valves, feed pump, return pump, 8 x pneumatic ball valves, 3 x full-level sensors, 3 x empty-level sensors, flow monitors, conductivity measurement, level control, switch cabinet

Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia, Additional title: Refrigerant: Ammonia, Cooling capacity: 70 kW, Design to: -8 °C, Design tc: 27 °C, Power: 15 kW, Operation / Control: Control cabinet with hardware control, Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: Screw compressor with refrigeration dryer and compressed air filters, Operating hours: 2169, Flow: 1,32 m³/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE Oil filter, oil separator tank, oil drainage system

KRONES ROUND GLASS LINE Features: • Year 2003 • 500/600BPM @ 700ml, 750ml, 1 Litre • Wraparound Boxes • 6 & 12 Pack • Cold Glue Front, Back & Tax Strip Labeller Asset List: 1 Waste compactor; 2006; Orwak; 9020; 54414; 415/50 2 De Palletiser; 2003; Krones Kettner; Prress Uni Abscheiber;22/0142/012; 415/50 3 Rinser 72 heads; 2003; Krones; Variojet; K563-291; 415/50 4 Filler 108 heads; 2003; Krones; Isofil; 2880 072-126; 415/50 5 Capper 18 heads; 2003; Krones; Topmatic/ Zalkin; 734-203; 415/50 6 Label check; 2015; Logics & Control; Logilook; 2359; 240/50 7 Case packer; 2003; Krones Kellner; Wrapapac W60; K95-044; 415/50 8 Laner; Krones; Multidivider 9 Robot; 2003; Krones/Kettner; Robogrip Entlander; 22/0795/008; 415/50 10 Spiral Case Elevator; Amberflex; 415/50 11 Bottle coder; 2017; Linx; 7900; AN135;240/50

Used Automatic Microfiltration Plant Sifa 2011 Are you in need of a reliable and efficient microfiltration system for wine and water filtration? Look no further than the Sifa Automatic Microfiltration Plant. With its exceptional performance and advanced features, this plant offers optimal filtration results, making it the perfect choice for your filtration needs. High-quality Microfiltration Solution by Sifa for Optimal Filtration Results One of the key highlights of the Sifa Microfiltration Plant is its ability to deliver high-quality filtration. Equipped with three chambers specifically designed for wine microfiltration and two chambers for water microfiltration. This plant ensures the removal of impurities and particles, resulting in superior filtration outcomes. Advanced Features and Automation for Seamless Operation and Control Thanks to its advanced automation system, the Sifa Micr ...

STORK MINIATURE LINE Features: • 50ml Glass & PET • 200 BPM • Flask Oval Round • Self Adhesive Front & Back Labeller • CAP Size 18 X 12, 20 X 12 ROPP Asset List: 1 Manual bottle infeed 2 Bottle conveyors 3 Header tank stainless steel 4 Rinser filler capper; 1996; Stork; Block 36 head rinser, filler, 9 head capper. New PLC HMI fitted 2021; 415/50 5 Level control / case reject; 2017; Logics and control; Logilevel HF1400; 2723; 240/50 6 3 station labeller; 1996 ; Krones; Autocol; 747-264; 415/50 7 Checkweigher; 2022; Garvens; Safeline; 333968; 240/50 8 Scale check; 2017; Logics and control; Logiweight LS; 2721; 240/50 9 &10 Case packer; Ganz brothers; CB90; DS22392; 415/50 11 Case sealer; 1995; 3M; 800AF-E; 2247; 240/50 12 Case coder and reject; 2019; Linx; IJ375; JB590; 240/50 13 Case erector; Kettner 14 Carton spiral elevator; 201 ...

BERTOLASO LINE Features: • Flask & Round • Glass & PET • 200BPM • 100ml, 200ml, 300ml, 375ml, 500ml • Wet Glue Front & Back Labeller Asset List: 1 Case erector and spiral elevator; 2013; Bortolinkemo; 415/50 2 DEPAL; 2000; OSMEKA; VAE; 521-0742; 415/50 3 Bottle conveyors 4 Rinser, filler, capper; 2013; Bertolaso; Epica 32/32/8; PMDM010128; 415/50 5 Packing table; 2006; Hutton; Gravity roller; 240/50 6 Labeller; 1994; Cavagnino & Gatti; C4810; 415/50 7 Case packer; 2005; Aries; 602; 152; 415/50 8 Case sealer; 1995; 3M; 800 AF; 224; 415/50 9 Case coder; 2019; Linx; IJ375; JB494; 240/50 10 Level check; 2017; Logics and control / Bertolaso; Logilevel plus; 240/50 11 Case spiral elevator end of line; 2022; Ambaflex; Spiralveyor SV; 51947-02; 415/50

STORK GLASS LINE Features: • Round, Shaped, Tapered • 350ml, 700ml, 750ml, 1.14 Litre • 200BPM • Wet Glue Front, Back, Neck Labeller Asset List: 1 DEPAL; 1996; Osmeka VAE; 521-0136; 415/50 2 Carton erector with Nordson hot glue applicator; 2013; Bortolinkemo; 415/50 3 Rinser filler capper; 1996; Stork; RVR30/146-36-9 LW; 021.141.10; 415/50 4 Labeller; 1996; Cavagnino & Gatti; CG84CL3/18; B4900; 415/50 5 Laner; 1996; Stork; SIE1500PB3; 031.169.00; 415/50 6 Case packer; 1996; Stork; 415/50 7 Case sealer; 1998; 3M; 800Afe; 3158; 415/50 8 Scale check weigher; 2016; Logics & Control; Logiweight LS; 2513; 240/50 9 Spiral carton elevator; 2022; Ambaflex; Spiralveyor SV; 51947-01; 415/50 10 Spiral carton elevator; 2013; Ambaflex; Spiralveyor SV; 15432-02; 415/50

Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill ER-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensur ...