precast concrete plant used for sale

Water treatment plant with semi-permeable membrane modules for desalinating pre-treated water. Reverse osmosis takes place via a two-stage process consisting of two pressure pipes, each with two membrane modules. The plant consists of: - Two pressure pipes, each with two membrane modules - Permeate blending and concentrate recirculation - Upstream fine filtration - Various sampling taps - Various measuring instruments for pressure, flow, temperature, conductivity and pH value - Flushing station with flushing tank and flushing pump - Chemical dosing stations for antiscalant and NaOH - High-pressure pump - Various automatic fittings - Control cabinet with touch display, Additional title: Reverse osmosis for desalination of raw water, Flow rate: 6000 l/h depending on the blending quantity, Max. operating overpressure: 14 bar, Recovery appr.: 82 %, Water: 5 - 7 m³/h; 1 - 10 bar, Operation / ...

Prominent water treatment plant, consisting of: 1. Softening: The raw water is fed into the double softener. Only one bottle is ever in operation and the other is in regeneration or stand-by. In the softener, calcium and magnesium are replaced by sodium. The system has a volume counter that switches to the other bottle when the preset quantity is reached. Regeneration takes place with saline solution from the brine tank. The value at the outlet is 0°dH. 2. reverse osmosis: Reverse osmosis fills the permeate tank with demineralised water, so-called permeate. Depending on the raw water quality, water temperature, condition of the membrane and correct setting, different conductance values and operating pressures result. The following flow rates are set during commissioning: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. permeate tank and ozonisation: The unpress ...

CIP tank with 4 separate tanks for water, lye, acid and disinfectant. The system consists of: - 4 tanks with various fittings - Feed and return pumps - 3 diaphragm dosing pumps - Pipework, pneumatic disc valves - Level sensors, in-line conductivity measurement, full and empty level probes, flow monitors., Additional title: Cleaning system with 4 vertical stainless steel vessels, Volume: 1270 l Caustic tank, acid tank, disinfectant tank, Operation / Control: Control cabinet for electrical and pneumatic systems, Bischof CPU, , Material: Tanks made of V4A or V2A stainless steel, Features: 4 x CIP tanks, 3 x diaphragm metering pumps, 3 x pneumatic diaphragm valves, feed pump, return pump, 8 x pneumatic ball valves, 3 x full-level sensors, 3 x empty-level sensors, flow monitors, conductivity measurement, level control, switch cabinet

Complete compressed air system Aircenter SM13 with refrigerant dryer and a compressed air vessel. The Sigma Control 2 unit coordinates compressed air generation and consumption., Additional title: Screw compressor with refrigeration dryer and compressed air filters, Operating hours: 2169, Flow: 1,32 m³/min, Operating pressure: 8 bar, Compressed air vessel volume: 270 l, Power: 7,5 kW, Frequency: 50 Hz, Weight: 440 kg, Operation / Control: Operating terminal / Sigma Control 2, Base construction: screw compressor, mounted on frame, Features: compressed air vessel; refrigeration dryer; coalescence filter KE; activated carbon adsorber ACT 12; dust filter KD; coalescence filter KE Oil filter, oil separator tank, oil drainage system

Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia, Additional title: Refrigerant: Ammonia, Cooling capacity: 70 kW, Design to: -8 °C, Design tc: 27 °C, Power: 15 kW, Operation / Control: Control cabinet with hardware control, Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Hydroelectric power plant - Power 85 kW consisting of: 1 piece turbine / useful gradient 6.5m / water volume 2'100 l/s 1 piece generator 1 piece control with control cabinet 1 piece rake

Sturm Coating System Description: For sale is a used coating plant from the manufacturer Sturm, formerly used at the Mercedes-Benz plant in Hamburg for the machining of rear axle beams. Technical data & scope of delivery: Manufacturer: Sturm (plant) / KUKA & Yaskawa (robot) Year of construction main plant: 2019 Former operation: 3-shift (age-appropriate condition) Plant components: Aggregates, dryer and cooling zone, paint booth, loading and unloading station Included robots / peripherals: Several replacement KUKA robots (models KR 210L 150-2 / KR 210 2, model years 2006–2012) Related Robot Control Cabinets 2x Yaskawa Robot EPX 2900 1x Thermal aftertreatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to plant maintenance, it is state-of-the-art Electrics & mechanics: Mostly in an age-appropriate or good con ...

Used Automatic Microfiltration Plant Sifa 2011 Are you in need of a reliable and efficient microfiltration system for wine and water filtration? Look no further than the Sifa Automatic Microfiltration Plant. With its exceptional performance and advanced features, this plant offers optimal filtration results, making it the perfect choice for your filtration needs. High-quality Microfiltration Solution by Sifa for Optimal Filtration Results One of the key highlights of the Sifa Microfiltration Plant is its ability to deliver high-quality filtration. Equipped with three chambers specifically designed for wine microfiltration and two chambers for water microfiltration. This plant ensures the removal of impurities and particles, resulting in superior filtration outcomes. Advanced Features and Automation for Seamless Operation and Control Thanks to its advanced automation system, the Sifa Micr ...

Manufacturer: Global EnerTec Year of manufacture: 2024 (produced March 2024, commissioned September 2024) Model / Type: GET Granulierungslinie 3t/h Type of machine: Tire recycling and rubber recycling line Operating hours: less than 500 hours Condition: Fully functional, currently in operation Input capacity: 3 tons of shredded tires per hour Input material: Shredded used tires, edge length 50 to 100 mm Output quality: Rubber granulate 0.8 to 4 mm, free of fiber and steel Connected load: 574 kW Average consumption: 340 kWh per hour Voltage: 400 V Plant size (length x width x height): approximately 32,300 x 11,700 x 6,600 mm Recommended hall size: 40 x 20 meters, minimum height 7 meters, recommended 8 meters Operating personnel: 1 plant operator plus 1 production assistant per shift Certification: CE certified Control and electronics: Siemens PLC control, with components f ...

We are selling our BTH system. The plant was extensively maintained (by the supplier Premier Tech) and prepared for a new packaging project, which was unfortunately cancelled. Currently, we only have one customer with about two production runs per year, each lasting about two weeks. It is a special project in which 4.8 kg are filled into transparent PE bags; this is possible with the machine at low power. The machine is designed for daily operation, which is why we now want to sell it. Below you will find some information. If you are interested, you are welcome to visit the machine on site. In order to continue supplying our customers with the 4.8 kg bags, we can sell the machine together with this project (it is a food-grade allergen-free product for a non-food application). Packaging in paper bags with an inner bag (liner) is much faster and easier. For questions or more videos, pleas ...

Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible.

A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment.

ID3818 Sorting conveyor belt / Sortierband Year/Year 2021

A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible.

Round and long moulders, Weight range approx. 350 - 2100gr Hourly output up to approx. 2000 pcs Ribbon Circular Knitted Length: approx. 280cm Adjustable trough inclination Long moulder up to max. product length 50cm Knitted board approx. 120cm long Stainless steel version incl. 2 flourers Wheat mixed doughs (90/10) to rye mixed doughs (90/10). Dimensions [W x H x L] 1,060 x 2,130 x 3,630 mm Connection 400V 5.5KW, 32A plug

Used PIERALISI oil extraction plant with decanter J2Technical Specifications & Performance DataThis complete olive oil extraction line centers on a Pieralisi J2 decanter and includes upstream preparation and downstream separation for continuous processing. The configuration is engineered for farms, cooperatives, and industrial facilities seeking reliable second hand equipment to integrate upstream of bottling and industrial packaging operations. Manufactured by Pieralisi with complementary stainless steel equipment, the line supports robust operation for edible oil production.Main decanter: Pieralisi J2 decanter centrifugeHourly throughput (decanter): 25–30 ql/hSeparators: 2 centrifugal separatorsMalaxers: 3 malaxers, type SiciliaPreparatory malaxer: 1 unit, capacity 5 qlCrusher: Hammer crusherWasher: Santoro washer in stainless steelDefoliator: Leaf-removal infeed conveyorConstruction ...

Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decante ...

A complete and fully automated tank storage and mixing system for the production of non-alcoholic, non-explosive liquids is available. Stainless steel tanks: 2, tank volume: 5m³, total volume: 10m³. Equipment: load cells, dosing pump, agitators, control system and level sensors. The system has seen very little operation and is therefore in an almost like-new condition. Documentation available. An on-site inspection is possible.

length: . mm width: . mm height: . mm Workbench with vice and assembly block Kelch The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 13000 mm y-travel: 2750 mm z-travel: 3000 mm turning speeds: 600 U/min spindle taper ISO: 50 milling head: 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 11137 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mm Control: Siemens 840C Tool changer: 100 Pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mm width: . mm height: . mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items a ...

weight max.: 20 t axial load -forward: 9 t axis load in the back: 9 t Brake system: size of tire: 550/45-22,5 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Tandem tipper Hydraulic tailgate Grain pusher Dual-circuit braking system Trailer hitch The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Mo ...

length: 1500 mm width: 700 mm height: 830 mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1500 mm width: 800 mm height: 860 mm a workbench with a vice The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

filtration performance: . l/min fleece width: . mm temperature: . °C The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: . bar coolant capacity: . l Expansion Range: . mm Paper belt filter Allweiler Filter flange 800x500 Tank 1400x800x40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roka Werk Kippfix TW-36E Fat Baking Machine with Accessories - Manufacturer: Roka factory - Model: Kippfix TW-36E - Fat baking device for donuts and donuts - made of stainless steel - Digital control with temperature and baking time display - With standby function at 140°C - With turning device - With tipping zone incl. drip tray - with 2 baskets - Hourly output approx. 360 pieces Technical data: - Power 7.2 kW - 3/ 400 V - 50 Hz

Industrial solar photovoltaic plant installed in 2021, with an original peak capacity of 676.13 kWp and a current peak capacity of 565.99 kWp. Equipped with monocrystalline PERC modules mounted on ballasted aluminium structures and 5 Huawei SUN2000-100KTL-M1 three-phase inverters, with a combined nominal output of approximately 500 kW AC. Includes an ITRON meter for zero-export control, electrical panels, protection systems, cabling, cable routing, and metering and monitoring systems.

Fat Baker Jufeba WW-GW 05 2 reversible baskets for max. 36 pieces each Steam lid, drainer tray with proofing trolley and ALU tipping troughs only with us DGUV V3 electrical test Connection 400V, 16A-CEE plug Used device with warranty

Milk E-Heating System PHE, Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump., Make: DMUK, Capacity: 1000-1000 L/h, Temperatures: Regulated by the controls, Circulation Pump: Included, Control Panel: Included, VDF: Included, Condition: Excellent

USED TETRA PAK REX TR27 ASEPTIC FILLING AND CAPPING COMPLETE LINE FOR SALE YEAR 2016 Item #: Usm-245 Category Tetra Pak Rex USED TETRA REX TR/27 Complete Filling and Capping Line For Sale 500ml and 1000ml: 1-USED TETRA PAK ASEPTIC REX TR/27 Complete Filling and Capping Line For Sale YEAR OF MANUFACTURING 2016, Filling Size: 500ml and 1000ml PACK SHAPE ; GABLE TOP or Tetra Rex SPEED: 7000 PACKS PER HOUR ASEPTIC FILLING FOR LONG LIFE PRODUCTS 2-Tetra Pak Tray Machine, Cardboard Packer 32 by Tetra Pak, Wrap Around, Formats: 23, 43, YEAR OF MANUFACTURING 2016 3-Conveyors: Type: Conveyor Control System and Easy Ride and Long Conveyors Condition: Excellent and Tetra Pak Maintained

USED TETRA PAK TBA 19 200ML SLIM 10V FILLING LINE FOR SALE Item #: Usm-247 Category Tetra Pak TBA 19 1-Tetra Pak TBA 19 200ml Slim Filling Machine, Year of manufacturing 2003 and version 10 and with ASU- Auto splice unit, Working Hours 40183 2-Tetra Pak Straw applicator is tsa 21, Year of manufacturing 2003, Version 200v 3-Tetra Pak Multi Shrink 65, Year of manufacturing 2003 5-Packer CSB-10 6-Conveyors and Paper trolly Condition: Tetra Pak maintained and good condition line.

USED TETRA PAK TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 2007 Item #: Usm-248 Category Tetra Pak TBA 19 1-TBA 19 125ml Slim Filling Machine, Year of manufacturing 2007, Version 20v, with ASU Auto Splice unit, speed 7500 Packs per hour , Working Hours 42000 2-Tetra Straw applicator TSA 21, Year of manufacturing 2004, Version 200v 3-Tetra Multi Shrink Wrap 65, Year of manufacturing 2004 4-Packer CSB 1D 5-Conveyors and Paper trolly Condition: Tetra Pak maintained and excellent workinh condition

USED A3 SPEED 250ML BASE LEAF FILLING LINE FOR SALE YEAR 2010 Item #: Usm-249 Category Tetra Pak A3 Speed A3 Speed 250ml Base Leaf with DIMC Cap in Mold, VCK Change from 125ml to 250ml Base Leaf in 2020, DIMC installed in 2020, Version 300v, Working Hours 33485, Speed 24000 Packs per Hour, Tetra Tray Shrink 51, Year of manufacturing 2010 Conveyors Filling Machine, PC-23 with chain 29 meter, Drive unit 4 pcs, Bend 90 X 4 pcs Conveyors TTS-51, UC-24 with chain 6 meter Condition: Tetra Pak Maintained.

USED TETRA PAK A1 TWA 180ML ULTRA WEDGE FILLING LINE FOR SALE YEAR 2019 Item #: Usm-250 Category Tetra Pak A1 A1 TWA 180ml Ultra wedge filling line, year of manufacturing 2019, version 1000v, speed 10000 packs per hour. with straw applicator ,Packer, conveyors and paper trolly.

Complete SIG Combibloc CFA 124 36 Aseptic Filling Line For Sale Item #: Usm-256 Category Sig Combibloc Complete SIG Combibloc CFA 124-36 Aseptic Filling Line For Sale SIG Combibloc CFA 124-36 Filling Machine Year 2013, formats 125ml / 150ml / 200ml / 250ml, speed 24,000 packs per hour, working hours 20,428. Meurer Buffer Table Year 2013, model CM/HSP 3KF, working hours 20,428. Meurer Conveyor System Year 2013, model CM/FT, working hours 20,428. Geyssel Straw Applicator Year 2013, suitable for 125ml / 150ml / 200ml / 250ml formats. Meurer Multi Pack System Year 2013, formats (3x1, 3x2) and (4x1, 4x2). Meurer Tray Packer Year 2013, formats 3x8, 3x9, 4x6, and 4x10. Meurer Tray Packer / Shrink Unit Year 2013. Condition: The complete line has been professionally maintained by SIG Combibloc. Running hours are approximately 20,428.

MARIANA SHRINK TRM700 SERIES INCLDUING LF AND LFT VARIANTS YEAR 2020 Item #: Usm-251 Category Others Technical Specifications – TRM-700 Series Designed For 1000ml Tetra Edge Packs Production Capacity Up to 60 cycles per minute Product Size Range: Minimum Size: 60 × 120 × 60 mm (L × W × H) Maximum Size: 320 × 460 × 370 mm (L × W × H) Film Specifications: Film Type: LDPE (Polyethylene) Film Thickness: 30 – 90 µm Reel Width: 225 – 575 mm

TETRA PAK TR28 REX FILLING LINE FOR SALE YEAR 2021 Item #: Usm-257 Category Tetra Pak Rex Tetra Pak Filling Line – TR/28 General Information Manufacturer: Tetra Pak Machine Type: TR/28 carton filling machine Year of Manufacture: 2021 Country of Assembly: Sweden Performance & Capacity Configuration: Dual-lane filler Output per lane: approx. 7,000 packs/hour Total output: approx. 14,000 packs/hour Filling formats: 500 ml cartons 1,000 ml cartons Operating & Technical Data Operating hours (last service reference): approx. 5,455 hours Preventive maintenance completed (latest service): full service including 166 maintenance tasks System includes: Filling system Sterile air system Cleaning/CIP system Carton sterilization system Condition Regular preventive maintenance performed Latest service completed successfully (service complete”) Minor outstanding tasks  ...

REFURBISHED TETRA PAK CAP FLEX 30 THE CAP APPLICATOR FOR HELICAP 23 YEAR 2014 Item #: Usm-258 Category Cap Applicator Refurbished Cap Flex 30 For helicap 23 Year of Manufacturing 2014

Spectral sorter with NIR spectral camera and RGB camera. Stands at our partner company in Italy

A Nordson Encore LT powder coating line is for sale The plant was bought new about three years ago, but never put into operation. It is in almost mint condition and has been stored in a dry place.

MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET  ...

The system is made of stainless steel and has been completely overhauled. Opening 1 m wide and 1.7 m high for parts up to 3 m. The layout length is 24 m. All pumps. Heat exchangers etc have been overhauled. We provide a 12-month warranty for the system. If necessary, the facility can be extended by one or more zones.

System for depalletizing empty beverage crates and palletizing full beverage crates. The system consists of the following components: - Depalletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer depalletizing; upgraded in 2017. - Palletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer palletizing. - Pallet pressure check (Syscona, 2001) - 2 pallet magazines (for good and rejected pallets) - Pallet labeling system (2005) for applying EAN 128 labels - Pallet strapping system (Strapex, 2005) for applying two horizontal straps - Pallet conveyors with turning segments as well as infeed and discharge stations, Additional title: Complete palletising and depalletising system for beverage crates; manufactured , Capacity: 44000 bo/h, Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates, Features: Depalletising robot; Palletisi ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.