precast concrete plant used for sale

A completely overhauled Kleemann large-format screening plant for the mining and recycling industry is available. Screening decks: 2, screen width: 1800mm, screen length: 5200mm, screening area per deck: 9.36m², total screening area: 18.72m². Overhaul: springs, base frame, cardan shaft, tensioning devices and electric motor. An on-site inspection is possible.

The plant include Major 3 decanter P1500/2000 Seperator All equipments include

Condition: used,Other: Overall width: 1,950 mmTotal depth: 1050 mmTotal height: 1,400 mmHot mixer: approx. 10 litres - 5.5 kWCalter mixer: approx. 25 litres - 2.2 kWFflange closure of the hot mixer may be missing and would have to be replaced on site,Manufacturer: DIOSNA Dierks & Söhne

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

Gravel washing plant - complete plant - = Capacity approx. 150 to/h consisting of: - Feeder - Scoop wheel - Sword Wash - Riser belt with pre-screening and washing system

Used, complete aseptic bottling line manufactured by Procomac. New: 2005. A controlled-contamination filling line with microbiological isolation, designed for filling products with a pH lower than 4.5. Suitable for PCO 1881 28mm bottles; sport-cap and flat-cap closures. General description of the system: Bottles delivered to the monoblock are completely sterilised with an oxidising solution, rinsed with sterile water and delivered to the filler. The bottles are filled by electrically controlled fillers and sealed using an aseptic capping machine. The caps are fed to the steriliser via a feeder and a belt conveyor in a positive-pressure environment using sterile air; they are sterilised with an oxidising agent (oxonia), rinsed with sterile water and fed to the monoblock via a positive-pressure feed channel with sterile air. The monoblock is equipped with a microbiological isolator ...

A total of five mobile antiviral air purifiers Mann & Hummel are available. Air change rate at 70m²: 5-fold, max. indoor room size: 70m², max. air volume flow: 950m³/h, prefilter: ISO ePM10, main filter: HEPA H14, min. separation efficiency: 99.995%. Machine dimensions X/Y/Z: approx. 770mm/510mm/630mm, weight: approx. 60kg. Three units have approx. 1000 operating hours, the remaining two are in original packaging. Documentation available. An on-site inspection is possible.

Technical description  Laminator for foil finishing . Solvent-free lamination . Foil _Folie, Alu foil, Cylinder width 1310 mm Laminating width 1300 mm Laminator Type = Duplex Diameter unwinder = 850 mm ( turnstile ) Diameter rewinder = 850 mm ( turnstile ) Sleeve 3 and 6 inches, Speed max = 450 m/ min. With accessories 

KRONES ROUND GLASS LINE Features: • Year 2003 • 500/600BPM @ 700ml, 750ml, 1 Litre • Wraparound Boxes • 6 & 12 Pack • Cold Glue Front, Back & Tax Strip Labeller Asset List: 1 Waste compactor; 2006; Orwak; 9020; 54414; 415/50 2 De Palletiser; 2003; Krones Kettner; Prress Uni Abscheiber;22/0142/012; 415/50 3 Rinser 72 heads; 2003; Krones; Variojet; K563-291; 415/50 4 Filler 108 heads; 2003; Krones; Isofil; 2880 072-126; 415/50 5 Capper 18 heads; 2003; Krones; Topmatic/ Zalkin; 734-203; 415/50 6 Label check; 2015; Logics & Control; Logilook; 2359; 240/50 7 Case packer; 2003; Krones Kellner; Wrapapac W60; K95-044; 415/50 8 Laner; Krones; Multidivider 9 Robot; 2003; Krones/Kettner; Robogrip Entlander; 22/0795/008; 415/50 10 Spiral Case Elevator; Amberflex; 415/50 11 Bottle coder; 2017; Linx; 7900; AN135;240/50

Fat Baker TOP Jufeba WW-GW 20 Full reversible basket for max. 60 pieces 1 proofing trolley with ALU tipping trough Robust technology LED Temperature Controller with Safety Thermostat Output approx. 600 pieces/hour Connection 400V, 32A-CEE plug Dimensions: 1325/2425 x 825 x 1135 mm, WxDxH Used device Visit our large exhibition!

STORK MINIATURE LINE Features: • 50ml Glass & PET • 200 BPM • Flask Oval Round • Self Adhesive Front & Back Labeller • CAP Size 18 X 12, 20 X 12 ROPP Asset List: 1 Manual bottle infeed 2 Bottle conveyors 3 Header tank stainless steel 4 Rinser filler capper; 1996; Stork; Block 36 head rinser, filler, 9 head capper. New PLC HMI fitted 2021; 415/50 5 Level control / case reject; 2017; Logics and control; Logilevel HF1400; 2723; 240/50 6 3 station labeller; 1996 ; Krones; Autocol; 747-264; 415/50 7 Checkweigher; 2022; Garvens; Safeline; 333968; 240/50 8 Scale check; 2017; Logics and control; Logiweight LS; 2721; 240/50 9 &10 Case packer; Ganz brothers; CB90; DS22392; 415/50 11 Case sealer; 1995; 3M; 800AF-E; 2247; 240/50 12 Case coder and reject; 2019; Linx; IJ375; JB590; 240/50 13 Case erector; Kettner 14 Carton spiral elevator; 201 ...

BERTOLASO LINE Features: • Flask & Round • Glass & PET • 200BPM • 100ml, 200ml, 300ml, 375ml, 500ml • Wet Glue Front & Back Labeller Asset List: 1 Case erector and spiral elevator; 2013; Bortolinkemo; 415/50 2 DEPAL; 2000; OSMEKA; VAE; 521-0742; 415/50 3 Bottle conveyors 4 Rinser, filler, capper; 2013; Bertolaso; Epica 32/32/8; PMDM010128; 415/50 5 Packing table; 2006; Hutton; Gravity roller; 240/50 6 Labeller; 1994; Cavagnino & Gatti; C4810; 415/50 7 Case packer; 2005; Aries; 602; 152; 415/50 8 Case sealer; 1995; 3M; 800 AF; 224; 415/50 9 Case coder; 2019; Linx; IJ375; JB494; 240/50 10 Level check; 2017; Logics and control / Bertolaso; Logilevel plus; 240/50 11 Case spiral elevator end of line; 2022; Ambaflex; Spiralveyor SV; 51947-02; 415/50

STORK GLASS LINE Features: • Round, Shaped, Tapered • 350ml, 700ml, 750ml, 1.14 Litre • 200BPM • Wet Glue Front, Back, Neck Labeller Asset List: 1 DEPAL; 1996; Osmeka VAE; 521-0136; 415/50 2 Carton erector with Nordson hot glue applicator; 2013; Bortolinkemo; 415/50 3 Rinser filler capper; 1996; Stork; RVR30/146-36-9 LW; 021.141.10; 415/50 4 Labeller; 1996; Cavagnino & Gatti; CG84CL3/18; B4900; 415/50 5 Laner; 1996; Stork; SIE1500PB3; 031.169.00; 415/50 6 Case packer; 1996; Stork; 415/50 7 Case sealer; 1998; 3M; 800Afe; 3158; 415/50 8 Scale check weigher; 2016; Logics & Control; Logiweight LS; 2513; 240/50 9 Spiral carton elevator; 2022; Ambaflex; Spiralveyor SV; 51947-01; 415/50 10 Spiral carton elevator; 2013; Ambaflex; Spiralveyor SV; 15432-02; 415/50

Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill DRS-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensu ...

A screen printing system is offered. This was extensively overhauled in 2016 and has rarely been used since then.

Fat Baker Roka / Kippfix SB 40B-S for approx.: 360 pieces/hour donuts / doughnuts 2 Baking Baskets & 1 Steam Lid Drip tray Connection 400V, 16A-CEE plug Used device

Hagesana Filter King TOP Model: F 20 Tabletop device Stainless steel version Connection 220V Used device

Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible.

Number of layers = 3, material LDPE,HDPE; Peel Products : HDPE /LDPE Film 25 – 150 my, Film width max. = 1100 -1850 mm Extruder type = 70.30 D / 70.30 D / 70.30 D Nozzle = 300 mm Manufacturer Reifenhäuser, Output = 250 – 300 kg/h, with internal cooling With thickness measurement, adjustable basket, thickness control, IBC Upgrade 2017 by K design Rotatable trigger Gravimetric system 3 main components plus 3 x 3 dosing components Winder Type= Tandem Max. diameter rewinder = 950 mm Winding shaft = 76/152 mm Accessories: 2 x Corona inside and outside, path control ; Fan , Steel Structure, Dimensions : length approx. 14 m, width = approx. 8.5 m, height = approx. 14 m

Used pastry line RONDO / RADEMAKER Consisting of: - RADEMAKER Block Processor for the gentle rolling out of dough blocks Year of manufacture: 2006 - RONDO preparation line for pastries of all kinds, such as waxed, filled products, 2 layers of dough, croissants, etc. - Guillotine, punching and cutting station ZGEM700W. A, year of construction 2009 - Calibration unit ZKWA605A. A, year of manufacture 2011 Very good condition, ready for immediate use. Visits and test runs are possible by arrangement.

The Fristam Double Screw Pump combines process duties typically handled by positive displacement with Cleaning-in-Place (CIP) duties typically handled by centrifugal pumps. This provides a robust and reliable platform that offers greater process flexibility. It is capable of handling both product transfer and CIP. Its low pulsation characteristics and excellent solids-handling capability reduce the risk of product damage, thereby improving product quality. Designed for handling sensitive, abrasive and high and low viscosity fluids, so ideal for use in a hygienic application accross the dairy, food, beverage and home/personal care industries. This pump is previously used in a dairy factory for pumping of milk. Maximum flow with milk: 7 m3/h. Maximum flow during CIP: 12 m3/h. Maximum particle size: 18 mm. Inlet connections: 2,5 SMS. Outlet connections: 2 SMS. Current motor: 1,5 kW - 400 V  ...

Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available

Process plant for the production of nut butters,, consisting of:, Product feed container (stands on platform),, 2 Lico mills with 2 Börger product pumps,, 2 collecting containers with lids for the puree,, 2 control cabinets for the 2 mills,, chiller, 6 x product tanks with a capacity of approx. 760 kg nut butter) and control cabinet,, Each tank can be controlled individually., Settings: speed of the agitator, stirring interval (x min on, x min off)

Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available

Qty. 1 Second-hand Cookware Production Plant Consist of 3 factories: Aluminium discs and plates production factory - Still Running Non Stick Alminium Cookware production factory - Only one machine is still running Stainless Steel Cookware producing factory - Stopped 1/2026 LAND AREA: 30 000 m² COVERED ARE: 22 000 m² PHOTOVOLTAIC PANEL INVESTMENT QUANTITY OF PV PANEL: 4800 Pcs. POWER GENERATION CAPACITY OF PANELS: 2 MEGA WATT

An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible.

A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible.

Oddy Novatek 2 Pocket Bread Dough roller and moulding machine, comes as 1 with a top weight dividing machine head and the bottom rolling and pinning machine attachment, 2 sets of weight blocks 65g-150g, 3 Drums, selling due to a change in our operation.

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Complete packing line for liquid/gel products in sticks, comprising: Inever PH6/8 - 8 lane stick pack machine with 8 rotary piston pumps, currently set up for sticks of 23mm width and max. 160mm length, with filling volume of 10 – 14 ml, with adequate format parts, sticks of 17 to 35 mm width can be processed, reel diameter 600mm, reel width 640mm, fitted with Allen Coding device, electrics 400V/3Ph/50/ 60Hz, power consumption 10kW, required air pressure 6 bar, machine floor space approx. 2200 x 2100mm (WxD), machine height approx. 3100 mm, machine net weight approx. 2850 kg. Enflex ENF11 horizontal intermittent-motion cartoning machine, carton size from 50 x 50 x 15mm to 125 x 180 x 40mm (or 125 x 140 x 60m). Includes pre-folded leaflet inserter, Nordson ProBlue hot-melt unit for glue closure of the carton flaps, output up to 60 cartons per minute, electrics 400V/3Ph/50 Hz, power co ...

Chamber pasteurizer for pasteurizing bottled beverages. The machine can accommodate up to 9 pallets at a time. Pressing the start button causes the door to close automatically and the chamber pasteurizer to start the program previously set via the visualization system. Once the program has run its course, the door opens automatically. Manual operation with manual control of the actuators is also possible., Additional title: for simultaneous pasteurization of up to 9 pallets, Max. load: 9 pallets, Voltage: 380 V, Frequency: 50 Hz, Material: stainless steel housing, Base construction: standing on feet, Features: pasteurization chamber, pallet conveyor, blower, extraction system, control system, and visualization

CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings, Additional title: Cleaning system with 5 vessels, Volume CIP tanks each: 2400 l, Height: 2,6 m, Operation / Control: Proleit Software, Material: vessels from stainless steel, Position: vessels standing on 3 feet each, Base construction: flatconical vessels, Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterf ...

Water softening system from Berkefeld: Ion exchanger for reducing calcium and magnesium hardness with 2 filter tanks and brine tank. Suitable for continuous operation. Year of manufacture: 1993 Capacity: 6000 l/h, Additional title: ion exchanger

CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump., Additional title: Cleaning system with a heated CIP tank, CIP-Tank: 1500 l, Features: CIP tank, tube bundle heat exchanger, pump, piping

Linear can filler with a rinser, filler, cap placer and sealer integrated into a single unit. Back-pressure filling is volumetrically controlled. Format adapters are available for all standard can sizes., Additional title: with 6 filling stations, Capacity: 2000 cans/h for carbonated drinks, Max. oxygen pickup on the filler: 25 ppb, Compressed air: IG 1/2, 6 - 10 bar, Length: 2774 mm, Width: 1100 mm, Height: 2000 mm, Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible, Operation / Control: Siemens Simatic S7, Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Brewing plant with a mash-out wort volume of 20 hl, comprising the following components: 1. Malting plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, malt conveyor and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels with copper lids, spindle station and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Pressure tank cellar with 2 x pressure tanks (Speidel, 2021, 86 hl, 3 bar) and 1 x pressure tank (INOX, 2018, 67 hl, 3 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17–20 kegs/h) 6. Refrigeration system acting as an ...

Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system., Additional title: PET bottle sanitising and filling system, Capacity: 24000 b/h , Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: Touch-Panel / Simatic S 7, Material: mainly stainless steel, Position: free standing, Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liqui ...

Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass., Additional title: with aroma recovery, Input quantity apple juice: 6600 kg/h, Water evaporation: 4840 kg/h, Discharge quantity concentrated juice: 1760 kg/h, Steam consumption: 1685 kg/h, Length: 7,70 m, Width: 6,70 m

Water treatment system consisting of: cation exchanger, reverse osmosis system, and pressure booster station, Additional title: Reverse osmosis system with cation exchanger and pressure booster station, Permeate capacity: 1100 l/h, Max. permissible pressure: 6 bar, Yield: 75 %, Salt retention: 98 %, Power: HD-pump 1,5 kW, 3,15 A, Frequency: 50 Hz, Length: approx. 2294 mm, Width: approx. 740 mm, Height: approx. 1220 mm, Weight: 200 kg, Features: Conductivity meter, fine filter, overpressure protection, high pressure pump, control unit, pressure booster station 2 salt dissolving and storage containers, 2 filter containers with nozzle rod and lower nozzle, central control valve with upper nozzle, control unit

Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings, Additional title: 3-tank system with heating elements, aeration devices and temperature control, Volume and dimension per tank: 2000 l Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm, Length: 4500 mm, Width: 1700 mm, Height: 2100 mm, Operation / Control: electrical box with buttons, switches and temperature controls, Material: stainless steel, Position: free standing, Base construction: standing tanks with lids, on pipe feet, Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box

The fully-automated carbonisation plant produces the CO2-amount of beer, beer mixing beverages, soft drinks, mineral water and wine in a continuous and high-precision way by precise controlled dosing of CO2., Capacity beer feed: 20000 l/h, Capacity degassed water: 10000 l/h, Capacity blended beer: 30000 l/h , CO2-supply: 8 barg, Power: 23 kW, Current: 50 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, Length: 2790 mm, Width: 1250 mm, Height: 2440 mm, Weight: 500 kg, Operation / Control: fully automatic, electrical cabinet with control panel, Material: stainless steel, Features: Flange connection: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonisation section; flow measurement; Anton Paar original wort, alcohol and CO2 measurement; pressure gauge; sampling taps; various other valves

Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

CIP system comprising three rectangular tanks with piping., Additional title: Cleanig system with 3 rectangular vessels, Capacity 1 x: 1000 l, Capacity 2 x: 2000 l, Length: 3,5 m, Width: 1,5 m, Height: 1,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: rectangular containers, Features: 2 x CIP vessel 20 hl; 1 x CIP vessel 10 hl; level indicator; manway, DN65 connections

Filling capacity of the line bottle filler: 7500 l/h , Features: Dosing pump as plunger pump (Bran & Lübbe, yp DMS-G, 30 (diameter) x 60 mm stroke, 326 l/h 0.5 atü), 4 inlets (NW 25, NW 50, NW 15 and NW 32)

System for the pressureless production of aqueous chlorine dioxide solution This system enables the pressureless production of an aqueous chlorine dioxide solution. The two starting materials are fed into a reaction vessel one after the other via peristaltic pumps. The liquid level in the vessel is monitored by a level probe, ensuring a correct mixing ratio of 1:1. The operating time of the peristaltic pumps is also monitored and controlled by the software to ensure precise dosing. After the reaction time, the resulting chlorine dioxide solution is rinsed with water in the storage tank and then dosed to the point of use using a diaphragm dosing pump and a dosing valve. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, ...

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system, Additional title: cold degassing via CO2-Stripping, Capacity: 20000 l/h, Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar, Gross volume buffer tank: 7060 l ; overpressure up to 4 bar, Residual oxygen content appr.: 0,010 - 0,015 mg/l, Operation / Control: Simatic S5, Material: stainless steel, Position: mounted on stainless steel frame with feet, Features: 2 x degassing  ...

NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control, Additional title: refrigerant ammonia, Brew water flow: 5 m³/h 2 bar, Ice water flow: 15 m³/h 2 bar, Refrigerant capacity: 85 kg Ammonia, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Operation / Control: Siemens S7, Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pum ...