precast concrete plant used for sale

An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible.

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: Sinumerik 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 Rotary table: 2000 mm speeds: 250 U/min turning diameter: 2500 mm table load: 10 t Torque: 33000 Nm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8x6,4x4,4 m Gentry gantry milling machine with carousel rotary table Head change station Tool changer The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

Laminator Triplex solventbased  Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

track-mounted jaw crusher MC140 Inlet width 1400 mm Weight 160 t Capacity up to 600 t/h Good condition

Block production line HENKE - Type 140/100/40 - Board size 140 x 100 x 4.5 cm (all-plastic boards) - Control Siemens S5-115 U - uncl. 25 Molds Stone fabrication machine with facing & core concrete = Paving stones, kerbstones, kerbstones, U-stones, hollow blocks & solid block bricks can be produced - Min. product height 50 cm, max. product height 400 mm HENKE-Vibra-Matik vibration: infinitely adjustable Compaction by adjusting the imbalances - Waterjet system for product refinement, lifting ladder payload 10,000 kg, Transfer platform with skip carriage Board shelf: front track countersunk ladder, clearing lane, packager, board brush, board turning cross Rear track: Lore track, Euro pallet beaver, vertical & Horizental binding machine incl. packer and strapping system

Item condition: in working order Availability: immediately Weight: 110 kg Max. capacity: 31 ltr. Heating renewed: 2025 Tilting troughs: 8

Springer Destacking and Packing System Complete with electrical control cabinet and control panels

Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of • Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel • Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor  ...

I sell 2 bottling lines for 60 and 100 ml bottles. Complete lines with bottle feeder, pumps, vibrators and applicators of drippers and cappers, capping machines, labelers and receiving tables. One of the lines can pour 60 and 100 ml because it has the right formats for this. The machines are to be viewed but are not in use. Price 100,000 net for 60 ml and 110,000 net for line up to 60 and 100 ml

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.

Manufacturer: Tomal Type: PolyRex 3.0 Year of Make: 2000 Content: 2 x 1.5 m3 Conveying / Dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless Steel Type: Vertical Dimensions: L 1,900/1,050 x W 1,800/600 x H 2,200/2,200 mm Curb weight: 300 kg Tech. Documentation: Yes Condition: Used Price: On request

Complete plant for the production of sand-lime bricks - Autonomous production plant with 6 employees - The plant is designed for a production of 50,000 tons /year - Pipe material round stone, aggregate size 32-50 mm - Crushing from 16-50 to 0-3 mm - Primary crusher/fine crusher/harp sieve/filler mill - Extinguishing in reactors 1&2 - Pressing: the press presses at 120 bar - Hardening boiler steam plant/so-called autoclaves = total 6 pcs. + 1 reserve - Residual steam is reused or discharged to the other halls - Packaging system: Fully automatic

Key data: 120 mm, 60 , 60 1/min

pallmann style agglomerator ; Plastic Recycling Machine for Film, Yarn, Bags, Fabric Stretch Film PE Film PP Film, Fiber Film, Filament, Fabric Technical Textile, Fiber Yarn Filament PE PP Scrap Sack Rope Film Stretch Film Stretch Film Recycling PE Stretch Film LLDPE Stretch Film Power Stretch Recycling PE Film Recycling HDPE Film Recycling LLDPE Film Recycling Used for recycling fiber, filament, yarn, nonwoven, sack, meltblown, film, stretch film and other plastics. Brand plastic recycling machine for PE, PP, PVC, bio, PLA, ABS, nylon, etc. recycling system.

Manufacturer: AVESCO Model: TBG 926-2K Erdgas Year of Manufacture: 2008 Type of Machine : CHP plant with peak load boiler (gas) Power Pth: 1950 kW (connected load WV) Pel: 175 kW Gas Engine: Liebherr TBG 926-2K, S/N 2005 02 7547 Synchronous Generator: Baujahr 2007, HCI 434 C2 250 kVA, S/N D23055s001 Electrical Output: 176 kW el Thermal Output: 260 kW th Operating Hours: Requirements: operation according to 90,000 Bh Weight (approx.): 8,000 kg Find more here - / Contact us at -

A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026.

Manufacturer: MAN Model: E2848 LER 322 Year of Commissioning: 2015 Power output: approx. 250 kW Find more here - / Contact us at -

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

Bread long-forming machine Bread long-moulder Kemper IL- Special - Bread long-weaver - Manufacturer: Emil Kemper GmbH - Type: IL Special - 400 volts

Stock number: F733, In stock: Yes, Amount in stock: 1 pc., Item: Packaging plant, Motor: 3500 Watt - 220 Volt, Product size: Max W 420 x L 550 mm., Manufacturer: Dibi-Pack, Model: 4255 Conf.term

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

Large pizza oven, manufactured by Pizza Master, model PM 731 E. 400V, 50 Hz, 9,5kW

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

Used Used Galdi Packaging RG50-2 Brick: Year: 2010 Condition: Good Used Galdi Packaging RG50-2 Brick: Model: RG50-2 Year: 2010 Speed: 2500 bricks per hour Direction: from left to right Product type: 1.5 l ? 2 l milk bricks CARTON FORMING Lower closure with heat sealing by presses CAP INSERTER Single-head Type of cap: Pure Twist Flip_34i Head height adjustment: Fixed (the carton is lowered to change format) FILLING MACHINE Number of filling valves: 3 Tank height adjustment: Fixed (the carton is lowered to change format) Filling type: with flow meters Type of valve and valve functions: AISI 316 valve with pneumatic actuator CARTON CLOSING Upper closure with heat sealing by means of presses GENERAL DATA Measurements of the cartons that can be processed (length; width; height): 96 mm x 96 mm height depends on the format Safety protection Code: QT 732 More details: https://bottlingscout.com