pre used for sale

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology ⦁ Optical set-up and positioning assistant ⦁ Generous edge clearance ⦁ Flat front covers ⦁ Block hydraulics ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and deflection compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ TCB - Thickness Controlled Bending Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Hydraulic upper tool clamping ⦁ Hydraulic lower tool clamping, hardened ⦁ Lower tool shifting 2 positions, pneumatic Crowning ⦁ CNC crowning Control ⦁  ...

Standard configuration Machine ⦁ C frame ⦁ Press beam ⦁ Highly dynamic electromechanical direct drive ⦁ Distance measurement system (Y-axis) with dynamic deflection compensation ⦁ Electrical cabinet air conditioning up to an ambient temperature of 40 °C Backgauge system ⦁ 3-axis backgauge with carbon fiber gauge finger (X, R and Z axis) Clamping system ⦁ Manual TRUMPF upper tool clamp ⦁ Manual TRUMPF lower tool clamp Control ⦁ TASC6000 machine controller ⦁ Integrated TRUMPF technology data ⦁ Data transfer ⦁ Network capability ⦁ USB interface Operation ⦁ Foot switch Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Backgauge system ⦁ 6-axis backgauge system Ergonomic package ⦁ Comfort support table (front) ⦁ Comfort foot rest ⦁ Front work area illumination (LED) ⦁ Swiveling control panel ⦁ Sitting and standing aid ⦁  ...

Working width: 3450 mm Working height: 2000 mm Number of cylinders: 5 St. loading dimensions L x W x H: 3600 x 1200 x 2720 mm Hess Multipress Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stro ...

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 160 tons -Motor: 22 kW -Clamping table: 810 x 870 mm -Max. insertion height: 500 mm -Max. stroke: 250 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1900/1800/H4200 mm -Weight: kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 25 to PRESS TABLE   table surface (left-right): 500 mm   table surface (front-back): 310 mm SLIDE   table surface (left-right): 250 mm   table surface (front-back): 133 mm   spigot hole diameter: 40 mm   stroke rate (max.): 155 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 0 mm   stroke max.: 60 mm   main drive power: 1.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 275 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 980 mm   space requirements -front/back-: 1000 mm   total height: 1890 mm   total weight approx.: 950 kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 440 mm   thickness of bolster plate: 60 mm SLIDE   table surface (left-right): 460 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 80 mm   stroke rate (max.): 140 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 10 mm   stroke max.: 80 mm   stroke rate (min.): 70 /min   stroke rate (max.): 190 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 370 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1225 mm   space requirements -front/back-: 1355 mm   total height: 2450 mm   total weight approx.: 3100 kg ATTACHMENTS (PRESSES)   strip feeder: optional   feeder type: grip feeder   foot engagem ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 43 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm SLIDE   stroke: 90 mm   stroke rate (max.): 105 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 63 to PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 530 mm SLIDE   table surface (left-right): 460 mm   table surface (front-back): 360 mm   stroke: 110 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   stroke min.: 6 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 450 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4 kW DIMENSIONS / WEIGHTS   total weight approx.: 4500 kg

CONTROLS   electronic controls SIEMENS PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, double sided   openings in uprights: yes   number of slide actions: 1 PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 1050 mm   opening in bed (left-right): 240 mm   opening in bed (front-back): 200 mm SLIDE   table surface (left-right): 900 mm   table surface (front-back): 600 mm   spigot hole diameter: 50 mm SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke min.: 20 mm   stroke max.: 200 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 570 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1600 mm   space requirements -front/back-: 3000 mm   ...

: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 € : 1867.32 € : 98800 € : 320 to : 3050 mm : 365 mm : 2600 mm : 750 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet  ...

Key data: 50 t, 2000 mm

with 3-axis CNC control (Y, X, R) With Hydr. Foot pedal (with lock) incl. 1 set of bending tools (punches and dies) 3800 kg Loading onto truck included

The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.

N. 06 INOX CRELL - MORE STEAM BRAND BABCOK WANSON

Gas pressure and heat generator from 2018 with approx. 1,500 operating hours. 9.5 bar, 135 KWth, 1,200 – 1,800 rpm, Compressor: Compair EK 175 NG Manufacturer: Bosch Model: CA 570 NA Type: Gas CHP Pressure and Heat Engine: MAN E0834 E302 Compressor: Compair EK 175 NG Serial Number: 100866970 Output [bar]: 9.5 Power [KWth]: 135 Year of manufacture: 2018 Operating hours: approx. 1,500 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.3 x 1.0 x 1.85

Key data: 135 t, 3100 mm, 2600 mm

Control DELEM DA 69T the machine was distributed by Knuth and manufactured in Turkey. Pressure capacity 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Projection 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm X-axis travel 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power main drive 15 kW Hydraulic tank capacity 250 l Bwebpxv Izez Hmxujpeu Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some stamps and dies are included (see pictures) Viewing possible under power.

Hammelmann Hochdruckpumpenanlage HDP 202 / S 1100-20, Baujahr 2019, mit nur ca. 300 Betriebsstunden. Die Anlage befindet sich in einem sehr guten Zustand, ist voll funktionsfähig und sofort verfügbar. Technische Daten: - Hersteller: Hammelmann - Typ: HDP 202 / S 1100-20 - Baujahr: 2019 - Maschinen-Nr.: B9.02202.0267 - Betriebsstunden: ca. 300 h - Max. Betriebsdruck: 3.000 bar - Förderleistung bei 3.000 bar: 28 l/min - Alternativer Betriebspunkt: 1.000 bar / 110 l/min - Antrieb: Volvo TAD 873 VE Dieselmotor - Motorleistung: 235 kW - Abgasstufe: Stage IV / Tier 4 Final - Motordrehzahl: 2.200 U/min - Pumpendrehzahl: 2.150 U/min - Max. Flüssigkeitstemperatur: 40 °C - Sauganschluss: DN100 - Ausführung im 10-Fuß-Container Die Anlage kann mit zwei unterschiedlichen Betriebspunkten betrieben werden: 1.000 bar / 110 l/min oder 3.000 bar / 28 l/min. Original Hammelmann M ...

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

A Trützschler fiber cleaning machine incl. feed table and control cabinet as well as a Trützschler feeding/opening unit for fiber material is offered. 1) A Trützschler CVT3 1600 fiber cleaning machine, year of manufacture: 1997, design: enclosed machine housing, several access doors, several inspection windows, material/air connection in the upper machine area, material feed via a feed table. Including feed table and control cabinet. 2) Trützschler CS feeding/opening unit, year of manufacture: 1988. Inspection possible by arrangement.

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10,5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 380 Volt total power requirement: 30.0 kW weight: 21300 kg range L-W-H: 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time.  ...

3 × AMANDUS KAHL 65-1500 Flat Die Pellet Mill – NEW 2025, in original crates Three brand-new AMANDUS KAHL 65-1500 pellet mills (2025), never installed, still in original factory crates. Ready for immediate delivery from Istanbul, Turkey. Kahl’s flagship and the largest flat die pellet mill on the market: up to 12 t/h per mill, up to ~36 t/h for all three. The mills come from a cancelled project and are offered at an attractive price well below the factory price. Package includes: 3 complete pellet mills with hydraulic, lubrication and oil systems EAPR automatic press control with 3 switch cabinets and remote maintenance 12 flat dies 1500 × 100 mm (9 × 8 mm, 3 × 10 mm) 72 pan grinder rollers, 18 breaking arms with knives Technical documentation (EN/TR) Technical data: die diameter 1500 mm, 630 kW drive, 10–12 t/h per mill. Suitable for wood, biomass, straw and gre ...

Key data: 63 t

Press force: 63 t, with drawing cushion and separate hydraulic power unit

Used TR-5 rotary tablet press. Technical Specifications - Manufacturer – Metalchem ​​Annopol - Type – TR-5 - Number of punches – 35 - Pressing pressure – max. 10 tons - Year of manufacture – 1988 - Weight – approx. 2000 kg The machine is operational but requires repair.

Used HOESCH chamber filter press. Technical specifications: Manufacturer – Hoesch Germany Type – 40/400806/4 Capacity – approximately 0.5 m3 Filtration area – approximately 40 m2 Operating pressure – up to 0.4 MPa Frame material – polypropylene Number of frames – 41 Year of manufacture – 1988 Plate size – 800 x 800 mm Operating pressure – approximately 6 bar Electrical box with press control.

The machine is in good technical condition; testing is possible by prior arrangement. WORK TABLE (MM) 900 x 700 mm UPPER PLATEN (MM) STROKE (MM) 550 x 400 mm 600 mm DAYLIGHT (MM) RAM CYLINDER DIAMETER 900 mm 135 mm / 1 pc AUXILIARY CYLINDER DIAMETER 3550 mm / 2 pcs RAM CYLINDER DOWNWARD SPEED (MM/S) 250 mm/s RAM CYLINDER RETURN SPEED (MM/S) 250 mm/s RAM CYLINDER WORKING SPEED (MM/S) 10 - 40 mm/s MOTOR PUMP 18.5 kW 45 cc OIL TANK (LITERS) OIL (LITERS) 345 l 67 l

Shelf press for veneering ORMA NPC 6/100 Shelf length 2500mm Shelf width 1300mm Number of batches 3 Automatic pressure boosting Safety cable "breakaway" Water press heating with water from the CO system Working pressure 350bar Press on 6 actuators Piston rod diameter 85mm CE Certificate Machine dimensions 340x165x255cmH Machine Weight 6000kg

40m³/h, +/-800 mbar, 1.1kW, 450 rpm

60m³/h, +/-500 mbar, 2.2kW, 1420 rpm

40m³/h, +/-600 mbar, 1420 rpm

40m³/h, +/-600 mbar, 1,85kW, 1420/min

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 63 to   nominal work capacity: 630 kNm PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   thickness of bolster plate: 250 mm SLIDE   table surface (left-right): 450 mm   table surface (front-back): 310 mm   spigot hole diameter: 50 mm   stroke: 100 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 17.5 mm   stroke max.: 100 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 340 mm   distance table - slide max.: 440 mm ELECTRICAL SPECIFICATIONS   total power consumption: 5.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1310 mm   space requirements -front/back-: 1500 mm   total height: 2900 mm ...

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/sec return speed: 120 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm control: DELEM oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 8650 kg range L-W-H: 4250 x 2050 x 2800 mm Very good condition () Current new price: 75.0000 Euros Special price on request --------------------------------------------------------- POWER BEND PRO electro-hydraulic press brake featuring: Increased daylight opening (installation height) Increased cylinder stroke Increased throat depth --------------------------------------------------------- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics Bending sequence calculation Product/tool library USB interface - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 74300 € : 1404.27 € : 100 to : 4.5 mm : 700 mm : 1000 mm : 210 mm : 1 - 132 mm : 58 1/min : 6 : 90 mm : 60 mm : 300 mm : 445 mm : 7.5 kW : 1650 mm : 1545 mm : 3011 mm : 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00 The data for this ad was cr ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to : 500 mm : 6.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 6000 mm : 3000 mm : 43000 kg : horizontal verschiebbar : 2550 mm : 2200 mm : 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to : 500 mm : 5.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 5000 mm : 3000 mm : 32000 kg : horizontal verschiebbar : 2550 mm : 1.700 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

: neu : ca. 4 Monate ab Auftragse : Italien : 258000 € : 400 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4500 mm : 5000 mm : 2600 mm : 24000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm Horizontal verschiebbarer Zylinder2.200 mm Hydraulisch beweglicher Ständer: 3.600 mm Bedienung über Handhebel sowie Bedienpanel Tisch mit integriertem Zylinder zum anheben des Werkstücks Ausrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH (Symbolfoto) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 € : 400 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 4000 mm : 2600 mm : 20500 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.900 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 € : 3591 € : 300 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 5000 mm : 2600 mm : 18000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 € : 2551.5 € : 300 to : 500 mm : 3.000 x 2.050 mm : 700 mm : 20 mm/s : 2 mm/s : 3100 mm : 3000 mm : 2600 mm : 11500 kg : horizontal verschiebbar : 2050 mm : 1300 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 4 Monate ab Auftragse : Italien : 107000 € : 2022.3 € : 200 to : 500 mm : 3.000 x 2.550 mm : 800 mm : 20 mm/s : 2 mm/s : 3550 mm : 3000 mm : 2600 mm : 8500 kg : horizontal verschiebbar : 2550 mm : 1900 mm : 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 80000 € : 1512 € : 200 to : 500 mm : 2.000 x 1.550 mm : 800 mm : 20 mm/s : 2 mm/s : 2400 mm : 2000 mm : 2600 mm : 4800 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solut ...

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 € : 1260.63 € : 150 to : 500 mm : 1.550 x 2.000 mm : 800 mm : 20 mm/s : 3 mm/s : 2350 mm : 2000 mm : 2500 mm : 4100 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 117000 € : 2211.3 € : 125 to : 500 mm : 800 x 400 mm : 900 x 600 mm : 600 mm : 300 mm : 115 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 15 kW : 1400 mm : 1950 mm : 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 72500 € : 1370.25 € : 35 to : 500 mm : 700x350 mm : 700x500 mm : 600 mm : 250 mm : 125 mm/s : 43 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1400 mm : 2300 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 79500 € : 1502.55 € : 60 to : 500 mm : 700x350 mm : 700x500 mm : 600 mm : 250 mm : 120 mm/s : 38 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1500 mm : 2350 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 € : 1695.33 € : 85 to : 500 mm : 700x400 mm : 800x600 mm : 600 mm : 300 mm : 105 mm/s : 41 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 1200 mm : 1600 mm : 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 138000 € : 2608.2 € : 170 to : 500 mm : 870x500 mm : 1000x600 mm : 600 mm : 300 mm : 110 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 19 kW : 1500 mm : 1950 mm : 2650 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

: neu : ca. 4 Monate ab Auftragse : Italien : 172500 € : 3260.25 € : 300 to : 500 mm : 1250x1000 mm : 600 mm : 22 mm/s : 2 mm/s : 7.5 kW : 1750 mm : 1500 mm : 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with M ...

: neu : ca. 4 Monate ab Auftragse : Italien : 38200 € : 729.62 € : 70 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 250 mm : 24 mm/s : 5 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil coo ...