pre used for sale

Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.

Machine to combine book blocks with book covers Equipped with Metris MT P120vB Book height : Standard 80 - 340 mm (XL 80 - 450 mm) Book thickness : 110 - 450 mm Block thickness : 2 - 80 mm Output : 200 - 300 books/hour

Manufacturer: SCHULZE Model: PRETREATmaker IV Year of Manufacture: 2021 Power Supply: 100–240 VAC, 50/60 Hz Power Consumption: 150 W Current: 0.6 A IP Rating: IP44 (Protection against solid objects >1mm and water splashing from any direction) Weight: 71 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Pneumohydraulic cylinder TOX PressotechnikHydro-pneumatic press, power packType: S 04.00.050.12 DFabr. Item No.: 208696.460 Year of construction approx. 2000Printing capacity: 4.0 ton. at 10 barPressure capacity: 3.0 ton. at 8 barPressure capacity: 2.6 ton. at 7 barPressure capacity: 2.4 ton. at 6 barPressure capacity: 2.0 ton. at 5 barPressure capacity: 1.6 ton. at 4 barPressure capacity: 1.2 ton. at 3 barTotal stroke: 50 mmPower stroke: 12 mmPiston rod: 30 mmThread mount piston rod: M22 x 2 mmCompressed air requirement: 3 to 10 bar- electronic

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 200 kw. d.c. drive and starter (new 2019), Electric cabinet (in need of some refurbishing), CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offered : as is where is, good working conditions, installed power - used power in work: about 60-65% : 200, conditions: AS IS OR RECONDITIONED TO YOUR BUDGET EXTENT, options available: AS IS or RECONDITIONED, capacity: 500-600 kg/h nominal capacity

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 240-320 kg/h (depending on material and feeding rate), Total installed power 104 kw d.c.380 V 50 H 3Ph (65% used in work), including:, scrap silo with extraction screw, crammed feeding unit, extruder with heaters and vents,, 85 mm Ø screw 35 L/D (reconditioned to 100% performances), vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer complete with hydraulic pack, water ring pelletizer, drying centrifuge, new electric cabinet, CE compliance, User’s manuals, Electrical drawings, This line is offered fully RECONDITIONED, availability: about 10 weeks from confirmation, capacity: 240-320 kg/h, INSTALLED POWER: 104 kw

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](.germanplast.eu/listings/4115725-drying-system-for-vertical-mi xers), price options: size and shape bespoke to project

A CNC fine milling machine Iselautomation KG with defective spindle is available. Travel X/Y: 400mm/200mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1600mm, weight: approx. 500kg. On-site inspection is possible.

Column Drilling Machine PRECIS Ø 23 mm Cone CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Total height: 1800 mm Weight: approx 800 kg

Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD

Presstek Dimension Exel with external Affinity chilling unit, AMS -air management system, Dell Dimension computer, serial tools, connecting cables and some repro materials. Very clean and maintained. Available immediately.

Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Manufacturer: Peak Model: Precision Hydrogen 200cc 100–230V Year of Manufacture: 2020 Type of Machine : Hydrogen generator Specifications: - Voltage: ~100/230V - Frequency: 50/60 Hz - Current: 6 Amps - Maximum Output Pressure: 100 PSI Find more here - .ucymachines/ Contact us at - sales@ucymachines

Inv. Num. : 8690 Type: iGen 150 Press Producer: Xerox Created: 2015 Parameters: Maximum print sheet size: 364 x 660 mm Minimum print sheet size: 178 x 178 mm Printed sheet weight range: 60-350 g/m2 Machine dimensions: 6150 x 1830 x 2440 mm

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Grooving, ruling and perforating device with 600mm working width, foot control

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke actuation via footswitch Weight: approx. 600 kg

Manufacturer: SCHMID Model: PremiumLine Year of Manufacture: 2010 Power Requirements : 380 V 93.0 A 50 Hz 3 Phase Exterior Dimensions : - Width 11,500.000 in (29,210.0 cm) - Depth 184.000 in (467.4 cm) - Height 151.000 in (383.5 cm) Accessories: Various spare parts: pumps, brackets, angle pieces for piping, pipes, screws, washers, sensory Complete SCHMID DES-PremiumLine etching system, available from inlet to outlet. The system consists of 14 individual modules, including piping, wastewater buffer tanks, pumps, valves, sensors, control cabinet, PC, and spare parts. The configuration includes two wastewater buffers, one dedicated to the development and stripping modules, and another for the etching modules. Fully equipped and designed for high-precision PCB or semiconductor processing applications. Find more here - .ucymachines/ Contact us at - sales@ucymachines

S. No.: G366J310535 Counter: Color Total 2’878’974 / B & W Total: 2’961’001 Format/Sizes: Maximum size: 330 x 660 mm Maximum standard sheet: 330 x 488 mm Minimum size: 98 x 146 mm Equipment / Additional information: With Fiery PRODUCTIVITY/PRINT SPEED • Average Monthly Print Volume: Up to 80,000 • Duty Cycle: 750,000 • 80 ppm (8.5 x 11"/A4), 52–350 gsm with Performance Package • 80 ppm (8.5 x 11"/A4), 52–220 gsm • 60 ppm (8.5 x 11"/A4), 221–350 gsm • 44 ppm (11 x 17"/A3), 52–350 gsm with Performance Package • 44 ppm (11 x 17"/A3), 52–220 gsm • 32 ppm (11 x 17"/A3), 221–350 gsm IMAGE QUALITY • 2400 x 2400 dpi VCSEL ROS for sharpness, detailed shadows and bright highlights • 1200 x 1200 x 10 RIP rendering without down sampling for Ultra HD performance

New mobile dental unit reversed including with new demountable chair type DENTA-COMP PREMIUM MAKER BPR DENTAL MOBILILLITY BPR SWISS Perfect machinery international whatsapp +31 653549259 The Netherland whatsapp +34 682511830 Spain

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

General SKU366W1229 MakePfaudler-Werke LocationBarneveld Pressure Working pressure1.5 Bar Working pressure jacket6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume576 Ltr. Pressure1.5 Bar Specified Features - Pressure vessel Capacity576 l. Vessel sizesdia. 1000x700mm ManholeDN200 Top connectionscheck OutletDN60 Max. temperature200°C With jacketvolume 6 l. Max. temperature200°C MaterialGlass With jacketcheck General No.209769 Year of construction1970 Mounted on consolescheck Floorspace1,0x1,0 m Total height0,40 m Weight740 kg Extra information Volume 115 l., allowable temperature 200 Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesPfaudler-werkeIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIn ...

General SKU251U320 MakePfaudler TypeCH 4000 No.64300 Year of construction1998 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4440 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity4440 Ltr. Vessel sizesDia: 1400x3200 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN100,DN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC MaterialGlass - Enamel (WWG-9115) General Floorspace1,7x1,7 m Total height3,54 m Weight1790 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPINew arrivalsGeneric medicinesPfaudler-werkeIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemi ...

General SKU366W1274 MakeSchallex LocationBarneveld Pressure Working pressure1 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1000 l Vessel sizesdia. 900x1300mm Dished frontscheck ManholeDN500 Top connectionscheck Outletcheck Max. temperature80°C MaterialStainless steel 1.4571 (316Ti) General No.15674 Year of construction1996 Mounted on legscheck Floorspace0,9x1,3 m Total height1,50 m Weight500 kg Extra information With level sensors Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesSchallexIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemi ...

General SKU366W1273 LocationBarneveld MakeSchallex Pressure Working pressure1 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1000 l Vessel sizesdia. 900x1300mm Dished frontscheck ManholeDN500 Top connectionscheck Outletcheck Max. temperature80°C MaterialStainless steel 1.4571 (316Ti) General No.15673 Year of construction1996 Mounted on legscheck Floorspace0,9x1,3 m Total height1,5 m Weight500 kg Extra information With level sensors Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesSchallexIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemic ...

General SKU203U020 LocationBarneveld MakeCarl Canzler Type1640 Ltr. Pressure Working pressure3 Bar Main Features MaterialMonel Volume1640 Ltr. Pressure3 Bar Specified Features - Pressure vessel Capacity1640 Ltr. Vessel sizesdia. 1200x1300 mm Dished topcheck Dished bottomcheck Top connections2x DN50, DN100 OutletDN50 Max. temperature120 °C MaterialMonel 2.4360 General No.15451 Year of construction1974 Mounted on legscheck Floorspace1,5x1,2 m Total height2,6 m Weight450 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesCarl CanzlerIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > Plastic & polymersTanks > Pressure vesselsIndustries > Chem ...

General SKU401S1130 LocationBarneveld CEcheck MakeEmerson network power Main Features Heating (medium)Gas Temp.18 °C Specified Features - Temperature control unit Temperating machinecheck With coolingcheck Temperature18-27°C. With temperature controllercheck With controlcheck MaterialMild steel General TypeHPF12U302A3P10020 Mach.No.10940780001 Year of construction2012 With switchcheck With switchgear( as is) Floorspace0,9x0,75 m Total height2,05 m Weight300 kg Extra information Extra Specificationsthis machine is used to cool air Fine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsBiopharmaceuticalDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsB ...

General SKU062B447 MakeTechno-G Solids Zutphen Year of construction1998 Mounted on legscheck Pressure Working pressure10 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1500 Ltr. Pressure10 Bar Specified Features - Pressure vessel Capacity1500 l Vessel sizesdia. 1200 x 1000mm Dished top, Conical bottom Top connectionsdust filter with air cleaning Outletdia. 200mm MaterialStainless steel 1.4301 (304) General LocationBarneveld Floorspace1,2 x 1,2 m Total height3,3 m Weight850 kg Extra information - With candle filter make Pall, type Filtroplast 70/50Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesTechno-g SolidsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndus ...

General SKU201P036 LocationBarneveld MakeVertikale druktank (1x), Fabrikaat leering Enschede Apparatenbouw B.V. No.No.48951-6 Pressure Working pressure3.5 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume12250 Ltr. Pressure3.5 Bar Specified Features - Pressure vessel Capacity12.250 Ltr Vessel sizesdia. 2100x2940mm Dished topcheck Dished bottomcheck Manholedia.600mm Top connections(11x) Outletdia. 100mm with ballvalve Max. temperature140 Degr..C. With propellor stirrerEkato, type EM-2080 Impeller EVPR2-25 Motor4.0 KW, 400 Volt (II 2G Ex de IIC T4 - ATEX Speed mixing shaft+/- 84 Rpm MaterialStainless steel 1.4404 (316L) General Year of construction2012 Weight2650 KG (excl. roerwerk/aandrijving).Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmace ...

General SKU201P040 MakePfaudler Werke GmbH Schwetzingen TypeBE-1000 without gearbox No.4084563 Year of construction2012 Mounted on legscheck Material Lining materialGlass - Enamel (WWG-9115) Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1474 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1.000 l (1.474 l gross) Vessel sizesdia.1200x1020mm Dished topcheck Dished bottomcheck Manholedia.350x450mm (oval) Top connections(5x)dia.100mm, (2x)200mm Outletdia.100mm Max. temperature-25/230 Degr.C. MaterialGlass General LocationBarneveld Weight1400 KGFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesPfaudler-werkeIndustries > Chemical > Fine chemicalsIndustrie ...

General SKU271W400 LocationBarneveld MakeManesty Betapress Main Features Tablet Diameter15 mm Specified Features - Rotating tablet press Rotating tablet presscheck Number of stations:16 Without punching diescheck Tablet sizesMax Dia 5/8” Filling depth0,626” With motor230 volt With variable speed drivecheck Capacity90.000 tablets/hour With hoppercheck MaterialSilicon steel 1.5023, Stainless steel 1.4552 General TypeBetapress No.57 U 1/69/D Mounted on framecheck With switchcheck With switchgear(as is) Floorspace0,7 x 1,20 m Total height1,80 m Weight800 KGConfectionerySolid pharmaceuticsRotating tablet pressesGeneric medicinesManestyIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsPresses > Rotating tablet pressesIndustries > Pharmaceutical > Generic medicinesBrand > Manesty What you can expect from Foeth: -- Machine is i ...

General SKU209W120 MakeHaagen &: Rinau No.301015/5 Year of construction1998 Mounted on legswheels Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN400 Top connectionscheck OutletDN40 Max. temperature143°C Max. temperature143°C MaterialStainless steel 1.4435 (316L) General LocationBarneveld Floorspace0,95x1,15 m Total height2,0 m Weight360 kg Extra information with spray ball. inspection window in manhole. Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts ...

General SKU209W129 LocationBarneveld MakeHaagen &: Rinau Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN400 Top connectionscheck OutletDN40 Max. temperature143°C MaterialStainless steel 1.4435 (316L) General No.301017/4 Year of construction1998 Mounted on legswheels Floorspace0,95x1,15 m Total height2,0 m Weight410 kg Extra information with spray ball. inspection window in manhole. Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmace ...

General SKU209W131 LocationBarneveld MakeHaagen &: Rinau Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN400 Top connectionscheck OutletDN40 Max. temperature143°C MaterialStainless steel 1.4435 (316L) General No.301017/3 Year of construction1998 Mounted on legswheels Floorspace0,95x1,15 m Total height2,0 m Weight380 kg Extra information with spray ball. inspection window in manhole. Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmace ...

General SKU404U1217 MakeBaumgartner &: Co. / Alois Binderberger No.571 Year of construction1994 LocationBarneveld Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume238 Ltr. Pressure2.5 Bar Specified Features - Pressure vessel Capacity238 Ltr. Vessel sizesdia. 850x695 mm Dished topcheck Dished bottomcheck ManholeDN300 Top connectionsDN50 (CIP) Outlet1 ½:: Max. temperature-5/144 °C With propellor stirrer(magnetic) Motor0.25 kW, 230/400 volt, 2720 rpm Speed mixing shaft± 200 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General Floorspace1x1 m Total height0,9 m Weight220 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesBaumgartnerIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other  ...

General SKU404U1216 MakeBaumgartner &: Co. / Alois Binderberger LocationBarneveld CEcheck Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume219 Ltr. Pressure2.5 Bar Specified Features - Pressure vessel Capacity219 Ltr. Vessel sizesdia. 750x800 mm Dished topcheck Dished bottomcheck ManholeDN300 Top connectionsDN50 (CIP) Outlet1 ½:: Max. temperature-5/144 °C With propellor stirrer(magnetic) Motor0,25 kW, 230/400 volt, 2720 rpm Speed mixing shaft± 200 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General No.569 Year of construction1994 Floorspace0,9x0,9 m Total height1,05 m Weight210 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesBaumgartnerIndustries > Chemical > Fine chemicalsIndustries > Che ...

General SKU344U849 LocationBarneveld MakeNovartis Services AG Pressure Working pressure1 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume400 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel Capacity400 Ltr. Vessel sizesDia: 800x800 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN25(2x), DN15 OutletDia: 25 mm Max. temperature50°C MaterialStainless steel 1.4435 (316L) General No.470 Year of construction1997 Mounted on legsWith wheels Floorspace1,3x0,9 m Total height1,2 m Weight170 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesService AGIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries >  ...

General SKU209W096 MakeDiessel Type200L No.96 18 2302 Year of construction1996 Mounted on legswheels Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity250 Ltr. (200 Ltr.) Vessel sizesDia. 644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C MaterialStainless steel 1.4435 (316L) General LocationBarneveld Floorspace0,80 x 0,85 m Total height1,75 m Weight180 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesDiesselIndustries > Chemical > Fine chemicalsIndustr ...

General SKU338T905 MakeUHDE Hagen TypeF650 No.1858022/5 Year of construction1987 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume30 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity30 ltr Vessel sizesDia: 228x959 mm Dished bottomcheck With covercheck Top connectionsDN 40 OutletG 3/8 Max. temperature-40/120°C MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace0,7x0,6 m Total height1,85 m Weight200 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesUhde HagenIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemi ...

General SKU430W1384 MakeEdelstahlbau Tannroda LocationBarneveld CEcheck Type350 l Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure6 Bar Specified Features - Pressure vessel Notified bodyClosed Capacity450 l., (350 l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN30 Max. temperature-20°C/+200°C MaterialStainless steel 1.4404 (316L) General No.1765 Year of construction2017 Mounted on legsand wheels Floorspace1,10x1,10 m Total height1,70 m Weight500 kg Extra information - mirror polished inside - pressure gauge attached Fine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmetics ...

General SKU418W1325 MakeEstrella AG (CH) LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume490 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity490 l., (400 l.) Vessel sizesDia. 800x1110 mm Dished topcheck Dished bottomcheck With covercheck Top connections5x DN80, 2x DN150 OutletDN80 Max. temperature100°C Max. temperature100°C MaterialGlass - Enamel General No.84174 Year of construction1985 Floorspace1,3x1,0 m Total height1,3 m Weight580 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesEstrellaIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > Biotech ...

General SKU418W1326 MakeTycon Venezia LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialGlass Volume438 Ltr. Pressure2 Bar Specified Features - Pressure vessel Capacity438 l Vessel sizesDia. 709x845 mm With covercheck Dished frontscheck Top connections2x dia. 80mm + dia. 100mm Outlet2x dia. 50 mm Max. temperature-10°C/+200°C MaterialGlass - Enamel General No.2537 Year of construction1984 Floorspace1,5x1,0 m Total height1,3 m Weight400 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesTycon ItalyIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > Plastic & poly ...

General SKU209W102 MakeDiessel No.96 18 2308 Year of construction1996 Mounted on legswheels Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C MaterialStainless steel 1.4435 (316L) General LocationBarneveld Floorspace0,80X0,90 m Total height1,72 m Weight190 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesDiesselIndustries > Chemical > Fine chemicalsIndustries > Ch ...

General SKU209W098 MakeDiessel No.96 18 2305 Year of construction1996 Mounted on legswheels Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity250 Ltr, (netto 200 Ltr) Vessel sizesDia.644 x 800 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck Outlet25 mm Max. temperature150°C MaterialStainless steel 1.4435 (316L) General LocationBarneveld Floorspace0,80x0,85 m Total height1,72 m Weight190 kgFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIGeneric medicinesDiesselIndustries > Chemical > Fine chemicalsIndustries > Ch ...