140,791 used machines on RESALE, but how to find them? Machine Search
Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Andruckpresse / Proof Press Asbern ADR.1 Baujahr / Year 1963 - SN. 7014 Format / Size max. 400 x 550mm Aufzugsstärke / Lift strength 1,2mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Schließrahmen - Frame OHT Letter Press Heidelberg OHT A4 -24 Frame OHT Tiegel -8 Frame KS Cylinder -1 Frame KSB Cylinder -2 Frame S Cylinder -4 Frame SBG Cylinder -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy ...
Pressstation für Falzmaschinen - Pressstation for Folding machine Stahl PS66 Year 1985 - Serial-No. 27410/85 Working width max. 660mm Pressure 60.000N Speedca. min. 50 m/min - max. 100 m/min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Auction-ID: A1-50943-312
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker VCL 60 DV Serial-No. 28503 Frequency 50 Hz Speed 1400 min power required 3 PS inlet capacity 60 m3/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
clamping force: 350 kN injection volume: 58,5 cm³ screw diameter: 28 mm platen size: 260 x 254 mm Condition: used, Specification: injection moulding machine for TPE - used clamping unit: - clamping unit: vertical - clamping force: 350 kN - opening stroke max.: 300 mm - platen distance max.: 500 mm - Mould installation height min.: 200 mm - Clear width between tie bars: 260 x 254 mm - Ejector stroke max.: 80 mm - Clamping unit: VV - Lift of protective bonnet: 500 mm Injection unit: - Screw diameter: 28 mm - Screw L/D ratio: 18.6 - Screw stroke max.: 95 mm - Injection volume max.: 58.5 cm³ - Injection pressure: 1577 bar - Plasticising flow: 8.6 g/s - Injection flow: 85.5 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive power: 7,4 kW - Total power: 13,2 kW - Hydraulics: 210 bar (tank 65 litr ...
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1460773 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464418 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Auction-ID: A1-50943-64
Auction-ID: A1-50943-348
Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40 Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
AIS – MUC 1-V2 Preparation Station AIS MUC 1-V2 industrial preparation station, turner-elevator, intended for preparation, assembly, control or handling operations in a professional environment. This equipment is designed to provide an organized and functional workspace, adapted to the needs of workshops, production lines and preparation areas. From a technical point of view, this type of workstation makes it possible to bring together the different elements necessary for work operations in the same space, in order to facilitate the organisation of the operator's workstation and optimise handling. Its industrial design favours robustness, stability and ergonomics, with a structure suitable for regular professional use. The workstation can be suitable for part preparation, assembly, quality control or packaging activities, depending on the configuration and the equipment that accom ...
Schließrahmen - Frame S Letter Press Heidelberg S A4 -2 Frame S Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-50943-314
Schließrahmen - Letter Press Frame Adast GP Tiegel -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 60 t stroke: 400 mm table surface area: 800 x 500 mm feed down: 4,03 mm/sec feed up: 5,82 mm/sec column daylight: 820 mm oil pressure max. in the work cylinder: 400 bar oil volume: 26 l voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lot Geberit Mapress stainless steel press fittings with REMS press jaw M42 Auction-ID: A1-50943-440
Auction-ID: A1-50943-540
Auction-ID: A1-50943-58
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464435 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Auction-ID: A1-50943-187
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker SV 2.130/1 Baujahr / Year 1978 - SN. B676219 Frequency 50 Hz Speed 2900 min power required 3 kW inlet capacity 130 m3/h max. vacuum 195 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Includes: steel box with various accessories. Auction-ID: A1-50859-506
equipped with 400V motor, mobile chassis, hopper, Auction-ID: A1-50597-120
AIS – MUC Preparation Station AIS MUC industrial preparation station, intended for preparation, assembly, control, assembly or packaging operations in a professional environment. This equipment is designed to provide the operator with a structured and functional workspace, suitable for workshops, production lines and industrial preparation areas. From a technical point of view, the AIS MUC makes it possible to centralize the various elements necessary for the operations carried out by the user. Its design aims to facilitate the organization of the workstation, to improve work ergonomics and to optimize repetitive manipulations. It can thus be integrated into various industrial processes requiring a dedicated and organized workstation. Its industrial design focuses on robustness, stability and durability, in order to meet the constraints of professional use. Depending on its configu ...
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVX SN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.D+MKE Year 1998 - Serial-No. 101486/98-256505 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Hello, Today we can offer you a high-performance crank press ERFURT Type.PDOH 630 from 2011 Offer for sale. The machine can still be viewed under power and will be sold from the site. Hello, Today we can offer you a high-performance crank press ERFURT Type. PDOH 630 from 2011 for sale. The machine can still be viewed under power and is sold from the site. ERFURT PRESS 630 TO Type. PDOH 630 Year of construction. 2011 Presskraft / Pressing power 6300 kN Table: Table Length x Width Length x Width 2900 x 1400 mm Tool installation height Tool installation height (mm). 800 mm / 926.94 mm Plunger stroke plunger stroke 350 mm/ 96.13 mm Slide stroke at the bottom, 150 mm adjustment at the top. Slide stroke bottom, 150 mm adjustment top. Stößel / Pestle Length x Width Length x Width 2900 x 1400 mm Stroke rate / 20-80 min1
Buchdruck Schließzeuge Regletten / Letter Press closing tools - rules Schließzeuge in Breiten 9-12-18-25mm und Längen 5-7,5-10-12-15-18-20-25-30 Keilmutter Keilback Schraube Regletten, Blei Schlüssel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
measuring range X-axis:500 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:1000 mm tool diameter:max. 380 mm tool taper:HSK 100 compressed air:4-6 bar dimensions:2,1 x 1 x 2,3 m machine weight ab.:380 kg
maximum number of results exceeded
please refine your search
10 € 
