pre shredder used for sale

Used Used PET Prefom Presses Husky 2010: Year: 2010 Condition: Good Used PET Prefom Presses Husky: Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com

Used Used PET Preform ENGEL 21.900 pz/h: Year: 2004 Condition: Good Used PET Preform ENGEL: Model: MacPET 4550-320 maszyna nr 52892 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com

Used Used Husky preform press: Year: 1989 Condition: Good USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95 More details: https://bottlingscout.com

Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg

Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if  ...

Mechanical stamping press manufactured in 2002. This PRESSIX 160 CNR 6 features a capacity of 160 tons and an adjustable stroke ranging from 20 to 200 mm. It operates at a speed of 20 to 70 strokes per minute and includes a motorized slide adjustment of 100 mm. The table dimensions are 1100 x 700 mm, providing ample workspace. If you are looking to get high-quality stamping capabilities, consider the PRESSIX 160 CNR 6 machine we have for sale. Contact us for further details.

CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -

Available from June 2026 Presto HPK 50 BS baler, built in 2011, with vorbulator and optional chain belt conveyor Horstmann Manufacturer: Presto Type: HPK 50 BS Year of Make: 2011 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 1050 mm (LxW) Channel cross-section: 700 x 1100 mm Filling volume, max. 1.23 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 6 t/h 60 kg/cbm: 9.6 t/h 100 kg/cbm: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Data Chain Belt Conveyor Manufacturer: Horstmann Type: PK 1100/11 Year of Make: 2011 Belt width 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length approx. 3000 mm Climbing part approx. 5000 mm Gooseneck approx. 1000 mm The press is still in use and can be viewed under operating conditions. It will be available from the beginni ...

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Dixi 50 S ? Vertical Baler Year: 2004 General: Type: Vertical baler for paper, cardboard, foil, PET, textiles, and other recyclable materials Pressing force: 50 t Drive: 7.5 kW electric motor, 400 V / 50 Hz Control: Microprocessor-controlled with programmable settings Bale Performance: Cycle time: ~41 seconds Press time: ~23 seconds Bale size (L × W × H): 120 × 80 × 80?110 cm Bale weight: 350?500 kg (depending on material) Feeding opening: 1200 × 670 mm Dimensions &, Weight: Machine size (L × W × H): 1600 × 1300 × 3100 mm Transport height (lowered): 2240 mm Approximate weight: 2,050?2,180 kg Operation &, Features: Manual bale strapping Automatic start when feed door closes Hydraulic ram return and full bale ejection Adjustable press time and bale size Optional extras: dust-extraction connection, hydraulic door opener Type: Vertical baler for paper, cardboard, foil, PET, te ...

General SKU327X694 MakeM. Roth LocationBarneveld CEcheck Type278 l. Pressure Working pressure4 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume278 Ltr. Pressure4 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 (316L) Capacity278 l. Vessel sizesø 600 x 1000 mm Dished topcheck Dished bottomcheck Manholecheck side manhole DN300 Top connectionscheck Outletcheck with pneumatic valve Max. temperature144 °C Information No.B854 Year of construction2008 Mounted on legscheck Floorspace0,80x0,80 m Total height2,20 m Weight200 kgPressure vesselsM.rothTanks > Pressure vesselsBrand > M.roth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 950 mm   table surface (front-back): 660 mm   thickness of bolster plate: 68 mm SLIDE   table surface (left-right): 540 mm   table surface (front-back): 450 mm   spigot hole diameter: 60 mm   stroke: 130 mm   stroke rate (max.): 65 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 370 mm DIMENSIONS / WEIGHTS   total weight approx.: 7000 kg Located in Barcelona - Spain 2 identical units available

Manufacturer: Wemhöner , Year: 1997, Type: Vario pin Presse, Control: Siemens S 5, Number of tables: 2, Automatisches Rüsten: yes, Pin-Sytem: yes, Heating system: Elekto, Nutzfläche : 1290 X 2500, min.Folienbreite: 1450, Min.-max. workpiece height in mm: 10-40, Press length mm: 2500, Pressing width mm: 1290, Work piece thickness max mm: 40, Membrane: yes, Foil magazin spaces: 4, Kammerdruck: 6 bar pneumatisch/360bar Hydraulschi, Through running machine: yes, Membrane: yes, Landing opening mm: ca.80, Längsdurchlauf: yes, Automatische Entleerung: yes, Through running machine: yes, FREE TEXT: Automatischer Folienozug mit Schneidanlage und Abnahmestation mit Wender/, Year :1997

General SKU223N082 MakeEWAC B.V. Broek op Langedijk No.26455-040 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket3 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure3 Bar Specified Features - Pressure vessel Capacity1000 ltr Vessel sizesdia. 750x2210mm Dished topcheck Dished bottomcheck Top connectionsdia. 300mm + dia 100mm + dia. 32mm Outletdia. 100 mm With jacketcheck Max. temperature145 degr. C MaterialStainless steel 1.4401 (316) Information LocationBarneveld Floorspace1,0x1,0 m Total height2,8 m Weight620 kgPressure vesselsEwacTanks > Pressure vesselsBrand > Ewac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

Technical data: Maximum pressure: 40 tons Year of Make: 2002 Press force: 50.5 t/m² Oil tank: 600l Bale weight: 375-525 kg Weight: approx. 15 tons Power connection: 400 V/ 15 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance

pressure:400 t distance between columns:1100 mm stroke:250 mm no. of strokes:25 - 75 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1100 x 965 mm capacity of ejector in table:30 t ejector stroke of ejector in table:80 mm capacity of ejector in ram:3 t stroke of ejector in ram:60 / 70 mm ram surface:980 x 800 mm column travel -side:800 mm ram adjustment:20 mm power capacity:80,0 + 5,5 kW weight:47,0 t Dimensions (WxDxH):3,5 x 3,3 x 6,0 m weight of switch cabinet:1,4 t dimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 m ejector in ram:hydraulic

pressure:400 t distance between columns:1060 mm stroke:450 mm no. of strokes:15 - 30 /min distance table/ram, max. stroke up, adjustment up:1160 mm table surface area:1000 x 700 mm capacity of ejector in table:2 x 16 t ejector stroke of ejector in table:125 mm Die cushion pressure in table:120 t Die cushion stroke in table:2 mm capacity of ejector in ram:2 x 4 t stroke of ejector in ram:100 mm ram surface:1000 x 700 mm column travel -side:630 mm power capacity:55,0 kW weight:50,0 t die cushion in table:2. station

Deltapilot S Endress+Hauser unused / like new Technical Details: Typ: DB50L-AC44BD13EG20 IP66/NEMA4X CONTITE VA 0 - 4000 mbar

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Palletizer Kettner Manufacturer: Kettner Type: Press uni KEG EP - BP Year of construction: 1995

Premixer SIMONAZZI with Brix and CO2 controlControl Siemens S7Power 18,000 l/h

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

cheese press stainless steel very good condition, been apparently very little used for sliced cheese such as Gouda designed for various sizes approx. 1 kg - 8 kg Special cheese sizes are possible by simple modification

Planetary grinders Manufacturer Precise In a suitcase with extensive zubehoer Rule transformer Tool holder SK40 with interchangeable tightening bolt Control range: 15000 - 45000 rpm Orbital speed 70 - 120 rpm when working horizontally max.: 70 rpm Radial delivery: 0.0001 - 0.002 mm Reception: SK40 electr. Connection: 220 V, 600 W Special price

High-frequency Fraesspindel Precise Type PKZ 50/51 with SK40 for mounting in the spindle of a milling machine and collet holder for receiving the cutter. Speed range 15,000-60,000 rpm Manufacturer Precise Control unit PVSF1 Waerme exchanger PWK17-8 Spindle PK 50/51 without automatic Tool. fully operational Special price! More information on request

Electric tool changer RASTER Premat EWD20

Press-Vite Buegel / Steam table 4 whirlpool hoods, 9000W Bj .2002, Pr12LP+ You buy a bell system Press Vite Buegel- / Steam table,with 4 hoe-adjustable whirlpool hoods, and 2 steam generators /en working width approx. 340 cm, 380VPr12LP - 9000W Bj 23.10.2002 Control GE VAT20 U20NOK7S BJ. 16.02.2002 Article number 17746; Please include requests;

Set for KUKA robot working area limitation Manufacturer: Nabtesco precision Europe Type: RV-260F-58.62 All information without guarantee

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Year:2015 Impression count around: 120 mio Heidelberg License Software Version S14B.11.B00 Press Center Color Assistant Pro Press Center Dry Star Advance Press Center Master Level Press Center Instant Gate Press Center Instant Star Press Center Wallscreen Press Center Netprofiler Features Automatic Impression-cylinder washing device Automatic Ink-roller washing device Automatic Blanket washing device Inpress control with wall screen AutoPlate XL Electromechanical double sheet control Non-stop feeder/Non-stop delivery Preset Plus extension (x3) modules Non-stop delivery (Plus Version) Pull lay double sheet detector Multi loader coating unit Ink temperature control doctor blade - Tresu Antistatic device Inking rollers for standard and UV inks 7 Units preparation interdeck drying Mixed operation conventional/UV Coating unit UV-preparation UV-preparation for delivery 3 UV int ...

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading

Pneumatic cylinder Manufacturer: TOX Type: K08. 81.200.12 Force 70 kN at 6 bar air pressure Total stroke: 200 mm, of which power stroke 12 mm max. with total stroke adjustment via hand-adjustable stop screw to the exact x-mass adjustment All information without guarantee