pre shredder used for sale

Technical Specifications & Performance Data The PREO E0P0514E2 is a robust, second hand case erector engineered for reliable end-of-line industrial packaging in beverage production and other FMCG environments. It forms regular slotted cartons (RSC) and secures the bottom flaps with hot-melt adhesive, delivering square, load-ready cases for downstream packing of PET bottles, glass bottles, aluminum cans, and multipacks. Model: PREO E0P0514E2 Category: Case Erector Manufacturer: PREO Year of manufacture: 2010 Rated speed: up to 1,500 bph (format-dependent), ensuring high-throughput case forming for a used bottling line Closure type: Hot-melt glue bottom flap closure Frame construction: Painted iron frame with stainless steel fairings for durability and hygiene Electrical supply: 380V, 50Hz Condition: IN STORAGE (idle and ready for inspection) Carton formats: RSC cases for a wide range of b ...

Used Saturator Simonazzi Predosix DT7 21000 l/h Functional Features of the Simonazzi Predosix DT7 Saturator The Used Saturator Simonazzi Predosix DT7 21000 l/h saturates mineral water for high-capacity bottling lines. Simonazzi manufactured this machine as part of the Predosix series, which is widely known for its precise gas-to-liquid ratios and consistent process parameters. Consequently, the DT7 model delivers a nominal output of 21,000 liters per hour. Therefore, it integrates seamlessly into lines operating between 18,000 and 24,000 bottles per hour, depending on bottle format and filling pressure. Moreover, its design ensures minimal pressure losses during peak operations. In addition, it adapts easily to existing layouts, making it a versatile choice for retrofits. Operating Principle and Process Control The Used Saturator Simonazzi Predosix DT7 21000 l/h injects carbon dioxide in ...

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Watts, Premia solid rubber tires with rim (2 pieces) -Tire size: 18x7-8 -Bolt circle: Ø 144 x 19 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 435 x 145 mm -Weight: 25.2 kg/pc.

Tung-Yu Cold Forming Press 22” x 24” deep platens 12” daylight Pressure up to 35/40ton Year 2015 Overall dims: 1.2m deep x 1.8m x 2m high Weight: 2000kgs +/-

Description An exceptional and increasingly hard to find Swiss Aciera F1 precision universal milling machine, presented here as a carefully assembled horological setup. This machine has been used within a professional antique clock restoration workshop for light, high-precision work only, and is offered in very honest, well-maintained condition throughout. It has not been subjected to heavy industrial use, which is reflected in the overall feel and condition of the machine. Aciera machines are widely regarded as being among the finest precision milling machines ever produced, comparable in quality to Schaublin, and are particularly sought after by horologists, instrument makers, and precision engineers. Specification & Features Swiss-made Aciera F1 universal milling machine Fitted with a single-phase inverter, allowing use from a standard supply Smooth, quiet running Co ...

This 3-axis PreMill V 610 B was manufactured in 2019. It features an X-axis travel of 610 mm, Y-axis travel of 350 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 710 x 350 mm and a maximum workpiece weight of 350 kg. If you are looking to get high-quality machining capabilities, consider the PreMill V 610 B vertical machining centre we have for sale. Contact us for further details.

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sprühdüsen Ejektordüsen Nebeldüsen Wasch-Reinigungsdüsen Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

Roller press, Make Swift, Model roller press 61, Year 1980´s ?, Width 610 mm, Available Direct, Width: 610 mm

Roller press, Make Swift, Model Roller press 76, Year 1980´s ?, Width 760 mm, Available Direct, Width: 760 mm

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

3 Double Feeders, 1 Hand Feeder, 1 Cover Feeder 1522, Stiching Unit 1528, Three Knife Trimmer, Belt Delivery, Format: Max. 365x305mm, Min. 148x105mm, Max. 360x300mm, Min. 140x75mm, Stiching Thickness: Max. 10mm, Capacity: 9000 Cycles/Hour, Standard Accessories

automatic divider The divider RheoPan Precision is the basis of RheoPan line. It is very precise in weight thanks to a system of double weighing of the dough and the automatic adjustment of settings. Its stress-free division system allows it to handle both highly hydrated and fermented doughs, as well as hard doughs. It can thus produce a very wide variety of breads depending on the modules installed.

Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;

Key data: 400 mm, 300 mm, 250 mm

Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).

PREWI measuring table was manufactured in Germany by PREWI Mess- und Steuerungstechnik GmbH. The device is designed for the precise dimensional inspection of larger workpieces in both industrial and laboratory conditions. The combination of precision guideways with a measuring system operating in three axes X, Y and Z ensures high repeatability of measurements. This solution allows for a measurement accuracy of ± 0,10 mm in the X and Y axes and ± 0,05 mm in the Z axis. The HEIDENHAIN ND 5023 digital readout, in turn, enable quick reading of values during measurements, facilitating the operation of the device. The PREWI measuring table is ideal for use in quality control departments, tool rooms and manufacturing plants, where it is used to verify dimensions and assess the conformity of workpieces with technological requirements. Technical specifications of the PREWI measuring table  ...

Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

Machine Type: Aluminum Saw Manufacturer: Emmegi Type: 550 SCA Year of Make: 1996 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference M-EME-0724 DESCRIPTION We offer you a used aluminum saw from the manufacturer Emmegi. Saw blade stutters up, hence the special price. Saw drive runs clean and quiet Digital angle display New minimum quantity lubrication from Menzel from 2022 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley filled Contents and equipment see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 300 mm workpiece height: mm total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,9 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools

bizhub PRESS C1060 = Equipment No: 1817933817 – Digital Printing Machine Incl. DF-626 Original Feeder, PF-707 Paper Cassettes, SD-506 Finisher, PB-503 Perfect Binder, IC-308 ext. EFI Controller incl. VI-507 Interface kit, RU-509 Connection Unit