128,430 used machines on RESALE, but how to find them? Machine Search
FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...
Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.
Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly
Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985
Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500
Premixer Falterbaum Typ: Famix 5000 Capacity: up to max. 5.000 l/h Year of manufacturing: 1973 2-component mixer with Bran + Lübbe pump (syrup and water) including vacuum pump
Tincture press Manufacturer: Hubert Schwanke/Fischer Type HP-25 Serial No. 51-57 Mobile undercarriage Separation of liquid and substance under pressure Capacity approx. 25 litres Output depending on the pressed material max. 80 litres/h Hydr. High pressure max. 450 bar, min. infinitely adjustable on the pressure switch from 0 bar Total pressure on pressed material area 25.5 t Spec. Surface pressure for normal strainer 450 bar = 29 kg/cm² Hydraulic oil quantity in storage tank max. 17 litres Hydraulic Oil Type: Shell Ondina 17 Hydraulic oil change: after approx. 2000-3000 operating hours or according to the degree of contamination of the oil Hydraulic Oil Pump 2 Stage High Pressure And Low Pressure Pump Type RZ 0,6/2-12,3/W.FL.250 Flow rate double solenoid valve 1 Two-stage valve: Type NE 20-450/30 set to 470 bar 1 ...
Vacuum press, vacuum table, membrane press Vacuform from Columbus Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. Natural rubber membrane, rubber membrane, extremely stretchy and easy to clean. Frame inner dimensions approx. 2920 x 1320mm Vacuum pump Becker, 400V, 0.75 kW with 25 m³/h output Large vacuum container, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run continuously. Mobile on four swivel castors, lockable Work surface folds down for storage. CE mark Original paint, only a few places touched up Very good condition, see original photos Machine is immediately ready for use Dimensions approx. 316 ...
Key data: 1 t
Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Inv. Num. : 7246 Type: HCFP Producer: Hidroliksan Created: 2022 Parameters: Compressive force: 100 t Table length: 1400 mm Table width: 1000 mm Stroke length: 700 mm Distance between frame walls: 1100 mm Machine height: 3100 mm Machine length: 1600 mm Machine width: 1600 mm Machine weight: 4000 kg
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
Foot control / strip bender / opening 159x77cm Auction-ID: A3-43525-18410
longitudinal travel: 1 mm cross travel: 1 mm table length: 1 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,5x0,8x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.
Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details.
Stainless steel multi-clamping prism A143-6-10-fold, size W 57 x L 143 x H 76mm, ground on all sides with steps.
Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg
Pre-sorting sieve 0.80x0.75m. (Compas) Auction-ID: A1-40135-317
A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveill ...
Tip distance approx. 500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
Key data: 18 t
Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Working width approx. 105 cm; Auction-ID: A1-40137-358
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
200 ton x 4000mm with Rolleri Pneumatic clamps
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm C-Type 1 Station
maximum number of results exceeded
please refine your search
550 € 
