134,065 used machines on RESALE, but how to find them? Machine Search
Obsolete; New tines; Combination spring; 3 control units necessary; Auction-ID: A1-46030-20
Altronic Surface Coating Swiss manufacturer As good as new, very precise system ca 300 Bh Year of construction 2009 New price of the system 334.000,- € lt invoice / without commissioning was developed for the solar industry to apply wafer-thin coatings of sulfur to solar modules, here it was important to achieve exact distribution, and it had worked. equipped with 9x linear vibrators type E-PLF-0.65-IP54 Total dimensions of the coating system: 180 w x 220 t x 210 h Dimensions: approx. 130w x 160 cm incl. control and adjustment table, possibly a belt conveyor is also available Shipping: 650,00 International shipping only on request, not EU can be very different, will be billed exactly
Premixer Falterbaum Typ: Famix 5000 Capacity: up to max. 5.000 l/h Year of manufacturing: 1973 2-component mixer with Bran + Lübbe pump (syrup and water) including vacuum pump
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
longitudinal travel: 1 mm cross travel: 1 mm table length: 1 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,5x0,8x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stainless steel multi-clamping prism A143-6-10-fold, size W 57 x L 143 x H 76mm, ground on all sides with steps.
Tip distance approx. 500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
Tool presetting and measuring machine Manufacturer: E. Zoller GmbH & Co. KG Type / Model: Saturn 1 Type plate: V4001-00191 Year of manufacture: 2001 Equipment / accessories (visible): • Basic machine Zoller Saturn 1 • Pick-up plate / turntable • Various tool holders, including HSK 63 • Machine table / substructure with integrated PC housing • Documentation partially available (visible in the substructure)Condition / Note: Machine is partially dismantled. The monitor is missing, and not all components are mounted. Function currently unknown/unchecked. Traces of use present. Sale is expressly made as a hobbyist/spare part or overhaul object. S ...
A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveill ...
Working width approx. 105 cm; Auction-ID: A1-40137-358
General description CNC lathe WEILER 120 CNC, designed for precision turning operations in toolroom and small batch production environments. Compact and robust German-built machine suitable for prototyping and workshop use. Technical details Manufacturer: Weiler (Germany) Model: 120 CNC Type: CNC / teach-in lathe Control: Siemens SINUMERIK System 3 Tooling system: Multifix quick-change toolpost Working area: Enclosed with splash guard Cooling: Coolant hoses visible Operation: CNC with manual access doors and chip tray Control panel: Screen, keypad, feed/speed controls, emergency stop Application: Precision turning, prototyping, and small series production Equipment - Siemens SINUMERIK System 3 control - Multifix quick-change toolpost - Coolant system - Enclosed working area - Chip tray Condition and remarks Used machine, untested. Shows signs of wear consistent ...
Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...
Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...
Serial number: 09-1297; for more details see photos of nameplate Auction-ID: A7-46619-209
Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...
Technical data: Input power: max. 1,200 pcs./h Dough weight: 280 - 1,250 g Dimensions (LxWxH): approx. 4.05 m x 3.0 m x 3.5m Weight: approx. 3,000 kg Mains voltage: 400 V 3-phase Mains frequency: 50 Hz Compressed air: min. 6.0 bar Pre-proofing time: 10 minutes Proofing time adjustment: variably adjustable via flaps Number of rows: 8 rows Number of hangers: 30, of which 25 are occupied Number of dough wells: 240, of which 200 are filled Dough carrier distance: 250 mm - Easy to dismantle with infeed conveyor with plastic side guides for cleaning purposes, - Inlet with light barrier, make Sick - with discharge belt reversible with slides under the outlet openings. - Cladding plates pluggable in stainless steel, easy to dismantle for cleaning purposes. - Frame, V2A - Deflection funnel teflonized with replaceable plastic inserts - without heating with UV lamps - Can be ...
Vaisala MI70 - Package with a lot of accessories. - MI70 - HMP76B,(chemical purged and sensor preheating), last calibrated on 29.11.2022 - HMP77B, (chemical purged and sensor preheating)last calibrated on 29.11.2022 -Suitcase -Charger - MI70SET - Carrying strap for the suitcase - 2 x 211302, Calibration Adapter Set for HMK15 Calibrator - 211339 Connection Cable for 300-Series - 219687 USB Instrument Cable - 219685 USB - RJ45 Adapter Cable - MI70 Link Interface Software - Calibration documents for each sensor from 29.11.2022 The device can be tried out before purchase by arrangement in 28844 Weyhe. Optionally, I can also offer recalibration from the manufacturer or an accredited test laboratory.
RMH Chain Mill Capacity container 50 litres Drive: 5.5 KW/400 V For shredding electronics, connectors, monolith Adjustable via hand lever and adjustable in different positions. Tiltable
Technical Specifications & Performance Data The Used premix BC â 10000 Lh is a robust premixing unit designed for continuous beverage production, supporting high-quality blending prior to filling, capping, labeling, and downstream industrial packaging. Engineered by BC, this second hand system delivers reliable throughput for a wide range of still and lightly carbonated beverages and integrates seamlessly into a used bottling line handling PET, glass, or aluminum containers. Manufacturer: BC Model: 100 Year of manufacture: 1994 Category: Premix Nominal capacity: 10,000 L/h Operational status: Ready for operation CIP system: Integrated cleaning-in-place Documentation: Technical manuals available Typical applications: Syrup-water blending for water, juice drinks, soft drinks, isotonic beverages; pre-feed to filling monoblocks Downstream compatibility: PET, glass, and aluminum packagin ...
Used Premix PARMATEC Drinkmix 12000 l/h The Used Premix PARMATEC Drinkmix 12000 l/h, which PARMATEC manufactured in 1998, delivers high-performance beverage preparation. This machine precisely mixes water, syrup, and COâ to produce a final product with excellent stability. Furthermore, its modular configuration and advanced process control make it highly suitable for medium and large-scale production lines. Technical Features Model: Drinkmix 12000 l/h Manufacturer: PARMATEC Year of manufacture: 1998 Processing capacity: 12,000 liters per hour Main components: Base structure provides support and ensures machine stability. Water tank stores water for mixing. Syrup tank holds syrup for blending with water. Circulation pump moves the product continuously through the process line. Carbonation and mixing unit injects COâ and ensures complete homogenization. Storage tank stabilizes th ...
2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...
Corona pretreatment for film Roller width = 2700 mm, Electrode width = 2500 mm, Speed = 250 m/ min electrodes = ceramic, Unloading roller = ceramic, Generator power = 6000 W, with 2 leaning rollers
Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g
year 1997 Auction-ID: A1-46617-30
YEAR 1997 Auction-ID: A1-46617-51
Year 2012 Auction-ID: A1-46617-146
Year 1997 Auction-ID: A1-46617-49
measuring range X-axis:150- 300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm enlargement:20 X fine adjustment:+/- 5 mm compressed air:6 bar dimensions:2 x 1,5 x2 m machine weight ab.:150 kg
turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories
turning length:140 mm dimensions of the machine ca.:4 x 2 x 1,9 m
9 SETS AVAILABLE: 1- BARMAG FK6-1000 M TYPE MULTİ (M6) YEAR 2000,TWIN MACHINE,DOUBLE DECK,W1.1,LYCRA,216 SPINDLES 2- BARMAG FK6-1000 V TYPE (V4) YEAR 2002,LYCRA,WITH INVERTER,240 SPINDLES 3- BARMAG FK6-1000 V TYPE (V5) YEAR 2002,WITH INVERTER,240 SPINDLES 4- BARMAG FK6-1000 V TYPE (V6) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 5- BARMAG FK6-1000 V TYPE (V7) YEAR 2003,LYCRA,WITH INVERTER, 240 SPINDLES 6- BARMAG FK6-1000 V TYPE (V8) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 7- BARMAG FK6-1000 V TYPE(V9) YEAR 2003,LYCRA,WITH INVERTER,240 SPINDLES 8- BARMAG FK6-1000 V TYPE(V10) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES 9- BARMAG FK6-1000 V TYPE (V11) YEAR 2005,LYCRA,WITH INVERTER,240 SPINDLES
Serial number: 133590-7 and 133591-3 Speed: 5000 rpm Reference: Beeper - Lot 19
Grinding Wheel Setting and Testing Device for Grinding Wheels - Concentricity and Assembly Aid Setting and testing device for grinding wheels for checking concentricity and fit before use on grinding machines. Designed for upright mounting of a grinding wheel on a shaft, without drive. Solid cast/steel construction Two precision supports / guide rods Central shaft for holding the grinding wheel Dimensions approx.: 40 × 45 × 53 cm (W × D × H)
Speed: up to 6000 rpm Reference: Pipit - Lot 123
Unused in original packaging.
SeriesNo. 90-272 Working range X: 600mm Z: 200mm Pendulum range X: 600mm Table speed: 1-28 m/MIN Dimensions magnetic clamping plate: 500x200 mm Working Area Y : 290mm Accessories: Coolant system 85L to 500L Belt filter system, Max Grinding Wheels Size: 225x20x51 Incl. assortment (pallet with grinding wheels)
Tool trolley filled Content and equipment see pictures Condition: never used / new (5)
maximum number of results exceeded
please refine your search
2.500 € 
