137,506 used machines on RESALE, but how to find them? Machine Search
I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.
pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...
Key data: 300 t
DURENDUS 300 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 22.450 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement ...
Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS
Key data: 400 t
DURENDUS 400 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 35.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...
Key data: 500 t
DURENDUS 500 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 46.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...
Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device
used
RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis
LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs
LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs
Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)
Professional trailer-mounted hot & cold-water high-pressure cleaner in excellent condition. The DYNAJET 350th Blue Performance is a compact and powerful industrial high-pressure unit designed for demanding cleaning applications such as industrial cleaning, surface preparation, construction, shipyards, municipalities, and heavy-duty maintenance work. Specifikations • Model: DYNAJET 350th Blue Performance • Year: 2023 • Pressure: Up to 350 bar • Water flow: Up to 16 l/min • Water temperature: Up to 95°C • Engine: Kubota diesel engine • Integrated water tank • Trailer mounted • Hot & cold water operation • Electric hose reel • High-pressure hose reel • Compact and lightweight design • CE approved Features • Professional industrial machine • Very user-friendly setup • Strong and reliable Kubota diesel engine • Compact trailer for eas ...
Professional trailer-mounted hot & cold water ultra high-pressure cleaner in excellent condition. The DYNAJET 500th Blue Performance is one of the most powerful and efficient industrial high-pressure cleaning units on the market, designed for heavy-duty professional applications including industrial cleaning, hydrodemolition, concrete renovation, shipyards, municipalities, surface preparation, and infrastructure maintenance. Machine Details • Model: DYNAJET 500th Blue Performance • Pressure: Up to 500 bar • Water flow: Up to 30 l/min • Water temperature: Up to 95°C • Engine: Hatz 3-cylinder diesel engine • Trailer mounted unit • Integrated water tank • Hot & cold water operation • Electric hose reel system • Digital control display • CE approved • Low operating hours Features • Compact and lightweight trailer design • Very user-friendly o ...
LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs
New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.
Metal Powder Preformer Technical Specifications: Model Designation 1250 kN PELLETER Modes of Operation Automatic Configuration Single Station Design Self-contained Direction of pressing Horizontal Material loading Automatic Material Unloading Semi-automatic Drive Self-contained Main Ram Pressing Force (max) 1250 kN 125 Tons Main Ram Pressing Force (min) 125 kN 12.5 Tons Main Ram Stroke (max) 105 mm 4.13 ins Max Hopper & Die Stroke 270 mm 10.63 ins Max Fill Length 120 mm 4.72 ins Min Fill Length 25 mm 1 ins Hydraulic Oil Specification ISO VG46HM Oil Tank Capacity 300 Ltrs 66 Galls Hydraulic ...
3000kN BIPEL press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations Model 3000kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Frame number Cylinder type Double acting Pressing force kN 3000 Pull back force at circuit pressure kN 120 Operating height mm Approx. 930 Stroke mm 610 Daylight between Tables mm 1206 Heated Platens mm 841 Table size L -R mm 774 F-B mm 889 No. Of Heated platens 2 Heated platen size ...
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg
Brand new gear pump, with internal gearing for PAAL Konti, Pacomat channel baling press. Can be used in systems with a motor of at least 22 kW
Factory rebuilt BIPEL 1500kN press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations :- Model 1500kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Cylinder type Double acting Pressing force kN 1500 Pull back force at circuit pressure kN 60 Operating height mm Approx. 930 Stroke mm 457 Daylight between Tables mm 976 Heated Platens mm 593 Table size L-R mm 711 F-B ...
Crimping tool, crimping machine, crimping jaws, crimping tool, hydraulic hose crimper, hose crimper -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg
Dual hydraulic pump for PAAL, 45kW Used 2-piece hydraulic pump for PAAL channel baling press. Can be used in systems with a 45 kW motor
Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91
Roller compactor, miner - used - : Price from location: only 950.-€ (net) Manufacturer: Bergmann Type: PS 8100E Year of Make: 1990 Serial number: 05 3658 2845/90 Press pressure: to Net weight: 750kg 400V, 5.5kW, Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, crushing and compaction of the waste, reducing its volume by up to nine times. Continuous filling: The machine allows continuous filling by all users. The feed chute can also be left open during the work process, which facilitates and accelerates waste compaction.
Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.
Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.
Used belt press made by Kreuzmayr model KEB 750, made of stainless steel. Designed for fruit and vegetable processing. Technical specifications: - Rated capacity: approx. 2000 kg/h (depending on the type of fruit and operating conditions) - Juice yield: up to 75% (from healthy, firm apples) - Length L: 2610 mm - Width W: 1450 mm - Height H: 1642 mm - Belt width/length: 750 mm / approx. 8000 mm - Working width/height: 688 mm / 0–50 mm, infinitely variable - Belt feed speed: infinitely variable 1.0–5.2 m/min - Automatic belt tension adjustment - Weight: 1100 kg - Power supply: 230V/16A/1.4kW - Drive motor: 240V/0.75kW/50Hz - Washing unit motor: 240V/0.18kW/50Hz - Required air pressure: min. 8 bar - Water consumption: approx. 3 l/min
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R
Baler Strautmann, type BaleTainer, press force 60 t, year of construction 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2012 Pressing force 60 t Total connected load 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: paper, cardboard, PET bottles, foil Note: The press is in working condition and has been inspected and tested. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale a ...
On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.
SUTEAU ANVER VFS 22x15 200t die cutting press was built in 2021 in France by SUTEAU ANVER. The machine is designed for demanding series production in the packaging, clothing and footwear industry. It enables precise cutting of a wide range of non-metallic materials from rolls or sheets, such as rubber, foam, felt or leather. The press force of 200 tonnes, combined with a number of well-proven solutions, guarantees high repeatability of the process and high cutting accuracy. The machining process is fully automatic. A movable beam lowers the head with the blanking die onto the workpiece, performing a precise cut with evenly distributed contact pressure. The cutting point is automatically set in relation to the height of the tool, while the operator can additionally correct its position with an accuracy of 0.01 mm using the control panel. The SUTEAU ANVER VFS 22x15 also enables automati ...
ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates
ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates
Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: R 100-1 rFr 0-2.5 bar G1/2 A -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 140/135/H110 mm -Weight: 0.6 kg/pc.
Used double-belt press made by Voran, model: ZBP1100. New 2017. The Voran ZBP1100 belt press is fully automatic and operates continuously, requiring only minimal supervision. Smooth adjustment of speed and pressing force guarantees optimum juice quality and high efficiency, reaching up to 80 per cent. The belt press is versatile and can be used for various types of fruit (stone fruit must be pitted before pressing), berries, vegetables and for drying various materials. The juice is discharged from the machine via a fitted juice pump. Particular attention has been paid to ensuring easy access to all parts of the system and their easy cleaning. Intended use: pressing apples, pears, berries, grapes and other soft fruits Technical specifications - Capacity: up to 7,700 kg/h (actual capacity depends on the type and quality of the raw material) - Juice yield: 80% - Loading or un ...
HAMMELMANN HDP 124 Dual Unit Integration of 2 x Hammelmann HDP 124 high-pressure pumps Technical data: Manufacturer: Hammelmann GmbH, Germany Type: Twin Unit with 2 x HDP 124 Year of Make: 2013 Machine numbers: B3.01124.xxxx and B3.01124.xxxx Working pressure: 2 x 2,500 bar Max. flow rate: 2 x 24 l/min Piston Diameter: P17.5 Engines: 2 x DEUTZ TCD 2012 L06 2V, Stage 3 Engine power: 2 x 129 kW at 2,150 rpm Diesel consumption: approx. 45–70 l/h Tank capacity: approx. 900 litres Noise emission: LWA = 110 dB Water connection: Express coupling Minimum water pressure: approx. 3 bar Required water volume: approx. 2 m³/h Dimensions: approx. 11.05 m x 2.60 m x 4.50 m Weight: approx. 11,750 kg Built on: DAF 75.250 4x2 truck, 250 hp, 19 t box body Aquajet 12 – n°01 – year 2013 2450bar – 24l/min Engine Deutz 5 919h Pump 3 723h Aquajet 12 – n°02 – yea ...
Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm
Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2017 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's s ...
This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN
Ex pressure vessel with agitator, MDG 45, 100 hours, V4424140313 Walther, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 5.020 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. Top Condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Top cleaned and ready for immediate use. Technical data: - Ex Stainless steel pressure vessel MDG45, 42.8 liters, 4 bar, Walther-Pilot. - Ex electric agitator with gear motor, SK0Z/2G-63S/4 2G TF RD, Nord - Ex pressure regulator, V3540000000, Walther-Pilot - Pneumatic controller, ITV2030 34F2N3, SMC - Incl. industrial plug and cable - optional with Defende ...
Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.
maximum number of results exceeded
please refine your search
