pre heater used for sale

Equipped with 10 crimp sets; unused

Used and untested

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

• Ideal for the fast packaging of small quantities of e.g. tablets • Blisters are glued in seconds in just a few steps • The contact pressure can be finely adjusted via a scale • Format changes are completed within a few minutes • The items are not thermally stressed • For format plates (w x d) 390 x 430 mm • With 11 format plates for different blister arrangements • Purely manual operation, no electrics/pneumatics • Without underbench

Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves

Delivery date: 1961 Press force: 63 t Largest sheet thickness: 10 mm Stroke rate: 65 1/min Ram stroke: 8 - 100 mm Lifter adjustable: 63 mm Greatest distance between table and ram at max. stroke bottom, adjustment top, table bottom: 450 mm smallest distance between table and ram at max. stroke bottom, adjustment top, table top: 180 mm for further technical data see nameplates Table dimensions below: approx. 610 x 470 mm top table dimensions: approx. 310 x 260 mm

Including various tools;

Rice spotting press Weight: 5000kg

Key data: 22 mm, 900 , 850

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

SNR - Batch of precision bearings 60KG

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W

"Lower counter bearing: 200mm Upper counter bearing: 600 mm Max. pressure: 35 kn"

On base and with vice

Machine number: 0820592 max. load: 25 kN Throat: 90 mm Plunger strokes: 75 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Motor power: 0.25 kW Table dimensions: approx. 220 x 150 mm incl. The installed punching tool

Machine number: 3140295 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 10 - 100 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm

Equipped with 4 uprights and 8 beams and intermediate slats to place a wooden plate. Complete with side table with dimensions: 105x60x80cm and 4x zinc plate (antra) each with dimensions: 226x100cm

COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996

2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

various book presses, in good condition, immediately available

2 x Schmidt Eccentric Press ZHS-4/36 - 600 tons of pressing force Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)

Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused

COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Product number: 2995 Type: HP-300 Belt width: 300 mm Power: 3 x 400V, 50Hz, 16A Dimensions: 1650 x 700 x 1600 mm Adjustable height between belts

Thermal Roll Press Type HP-2 used machine in excellent working condition CE marked year 2013 voltage 220 V 50/60 Hz

V6 30 degree T mold set; length approx. 3.1 meters

Length approx. 1800 mm; WILA NS Recording

Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted

Volume 350 L

Voltage: 380 volts ; Capacity: 60 TONS; Stroke length: 250 mm ; Width: 570 mm ;

Equipped with 10 crimp sets; unused

Table dimensions: 475 x 475 mm

automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

v.v. euroklemming

Machine number: 2-0538 Compressive force: 28 kN Stroke: 12 Table dimensions: approx. 200 x 160 mm incl. installed punching tool

Year of delivery: 1994 Factory number: 035-021/73 Nominal force: 100 kN Permissible delay time: 118 ms Safety distance hand control tool: 190 mm Table dimensions: 500 x 400 mm Passage: approx. 100 mm incl. A thermoforming device with foot pedal

Machine number: 3-0512 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 160 mm incl. installed punching tool