pre heater used for sale

Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN

direct imaging very good condition in western europe, Print numbers: 11mio, Format: 37 x 52

Compresor system Prematic 388/150 PAKO vollaut. L x W x H: 1.1 x 0.7 x 1.2 m Weight approx. 120 kg Built in 2016 Refrigeration dryer Prematic IDFA The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

The following materials are available: Cover Liner Piston Water Jacket Connecting Rod Fuel Pump Any Parts

No. 722 Year of construction: 2003 400 V, 3 Ph, N PE, 50 Hz max 16 amps spares 1 complete replacement welding jaws Various replacement knives Various small materials 1 set of trigger belts Furthermore, a printer Smartdate 5 128 with new thermal strip, as well as various spare parts is available at an additional cost.

: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min voltage: 400 V / 50 V adjustment movement hydraulic up to: 120 mm motor speed: 1400 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1200 x 800 x 1750 mm Horizontal and vertical position, optionally two or three driven rollers, standard roller set, lateral guide rollers, foot pedal with safety button, according to CE, operating instructions, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 250 mm stroke: 10 - 115 mm no. of strokes: 60 Hub/min dayligth: 285 mm distance table - lower edge of ram: 400 mm ram adjustment: 50 mm table-size: 500 x 750 mm ram head dimension: 340 x 440 mm work height max.: 700 mm table hole: 220 mm ram hole: 45 mm total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 1,4 x 2,5 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high  ...

: 50 mm roll diameter: 150 mm revolutions per minute: 10 U/min adjustments: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1,2 x 0,8 x 1,75 mm The PB 50-3 H is a hydraulic profile bending machine: we produce thisprofilebender in Europe and deliver it directly from our stock. This hydraulic profile bending machine has a shaft diameter of 50 mm and 3 driven rolls. It is easy to switch between working with two or three driven rolls via the gearshift on the side of the machine. Operation of the profile bender is done by a foot pedal and with the pedals you choose the turning direction of the rolls. Our PB 50-3 H has a handpump to adjust the position of the upper / centre roll with hydraulics. The position of this upper roll can be read out on a scale and on the digital display (0,1 mm). Furthermore, our Profi Bend machines can work in  ...

: 50 mm roll diameter: 148 mm revolutions per minute: 13,6/27,2 U/min total power requirement: 1/1,4 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 800x920x1450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 10 - 75 mm no. of strokes: 125 Hub/min dayligth: 225 mm distance table - lower edge of ram: 300 mm ram adjustment: 50 mm table-size: 360 x 560 mm ram head dimension: 260 x 340 mm work height max.: 670 mm table hole: 140 mm ram hole: 35 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,1 x 1,3 x 2,0 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This hig ...

pressure: 125 t throat: 300 mm stroke: 10 - 135 mm no. of strokes: 50 Hub/min dayligth: 315 mm distance table - lower edge of ram: 450 mm ram adjustment: 60 mm table-size: 600 x 900 mm ram head dimension: 315 x 550 mm work height max.: 800 mm table hole: 250 mm ram hole: 50 mm total power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,65 x 1,68 x 2,87 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. Thi ...

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 16 t plate thickness: 4 mm no. of strokes: 70 Hub/min stroke speeds: 1,7 sec. working feed: 2/9.8 mm/sec return speed: 20 mm/sec piston stroke: 70 mm arm length:: 160 mm total power requirement: 2,2 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,8 x 0,45 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t plate thickness: 4 mm no. of strokes: 26,6 Hub/min stroke speeds: 1,7 sec. total power requirement: 2,2 kW weight of the machine ca.: 190 kg dimensions of the machine ca.: 0,68 x 0,44 x 1,214 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,650 t diameter of piston: 180 mm working feed: 2 mm/sec return speed: 20 mm/sec pressure capacity max.: 200 bar toolpiece height min.: 200 mm dimensions of the machine ca.: 1150 x 750 x 1103 mm This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular graduation on the worktable for easy bend measurements and this horizontal press can be delivered with several tools (for example block punches) that can be mounted on the tool mount and tools that can b ...

pressure: 60 t throat: 235 mm stroke: 10 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 50 mm table-size: 470 x 700 mm ram head dimension: 310 x 410 mm work height max.: 670 mm table hole: 190 mm ram hole: 40 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,23 x 1,46 x 2,35 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This  ...

For sale pallet changer / inverter /. Capacity - 2000 kg.

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000

pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...

materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration

Used Case Erector PREO E0P0514E2 Case erector PREO E0P0514E2 Closure of the carton part under hot glue Painted iron frame with stainless steel fairing [...for more information send your inquiry to the seller.] refno: FC12

Premier Pallet Changer. Max load capacity: 1500 kg. Incl. sep. controll cabinet

Premier model P200 single side and wrap labeller with top hold stability bar, bottle infeed/spacing system, height adjustable wrap station and back pad. Angle adjustable labelling head. 180mm high label beak. 3m x 80mm wide slat variable speed conveyor, full stainless steel construction. 240v single phase. Dimensions 3m x 1.2m x 1.5m high

Machine in great condition, fully operational. Production year of the welding machine and heating tunnel 2009. Dimensions of the sealer 240x120x145 Weight 1130kg

Preferred Packaging shrink packaging machine Automatic packaging machine with a conveyor belt and a shrink oven

Double miter saw Make Pressta Eisele Type Norma LMS D 400 Masch. -No: 222633 Year of construction 1992 Technical specifications Cutting length 4000 mm Saw blade diameter 400 mm Speed 2890 rpm. with - Neig and tiltable - Digital length display Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic punching machine make PRESSTA EISELE type KST 120Machine -No: 5161 built in 1991Technical specifications:Ram stroke: 40 mmRam force: 60 kNInstallation height tools: 250 mmProjection: 110 mmTable area: 200 x 150 mmPower transmission: 10Dimensions: 280 x 1480 x 425 mmWeight approx: 140 kgwith- underframe- 5 punching toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Chocolate tank, 2013, Stainless chocolate melting tank, 500L, agitation with scrape surface, adjustable temp controls, mounted on stainless skid, 3Ph

This Premill V 610 B Milling machine was manufactured in the year 2015. It is equipped with a Siemens 828 D control unit and has 4 axis.

S. No.: AAC02761-0502-6018 REV 3 Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device - Destacker - RIP

Complete regranulation plant OMP Prealpina Type:ES-130. Screw and cylinder were renewed in November 2021 A new groove bushing as a spare part Simple degassing with vacuum pump DC drive used for PE/PP. Throughput at PE approx. 500-600kg. at PP.450-500.kg. per.h. Consisting of foil silo with agitator and discharge screw. Regrind/granulate dosing screw. Masterbatch dosing screw Tamping plant Extruder 130 L/D Hot tee granulator( also water ring granulator) Centrifuge Classifying sieve Removal with pressure blower. Plant is tested and stored (immediately ready for use)

This PRESSTA EISELE Profilma 600 R was manufactured in 2013. It features a 9.2 kW drive with an 18.5 kW reinforced option and uses saw blades with a diameter of 600 mm. The cutting range allows for a maximum cutting height of up to 210 mm and a maximum cutting width of 350 mm. It includes a Siemens S7-300 control system and a chip extraction system with a 4 kW motor. Contact us for more information.

There are two identical cylinders available, max. pressure: 6bar, total stroke: 100mm, power stroke: 12mm, max. press force: 39.9kN, fast approach force: 1700mm, retracting force: 1900N, weight: 20kg.

Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.

There are two identical erecting stations available, connected load: 7kW, with documentation.

Description Regranulation line for polyolefins Screw diameter 85 Nr.1 Vent Spaghetti granulation head Hydraulic screen changer Cooling tank Pelettizer

Cutter diameter: 250 mm notching width: 400 mm notching depth: 85 mm profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Hydropneumatic feed via foot switch Weight: approx. 350 kg

GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 - 79,200 tablets / hour. ? Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm ? Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Imeca - 8 m? Pressure filtring unit - Rotary trays - Trays of 8 m2

Shredder mill with blades Brand: Previero, cutting chamber: 810x180 mm. For shredding. Engine: 55 kw (75 hp). Electrical panel

Key data: 130

Granceado line (pelletized) Extruder 1 spindle, brand: Previero Sorema 130 Ø 35 L/D, motor: 250 Kw with variable speed drive. Degasser, hydraulic filter changer: 215 mm, overhead cutting to water, centrifuge, discharge cyclone, tromel: 1 m, rotary valve, solids transport vacuum cleaner. Forced feeding with silo: 11,000 l. with remover. Exit cyclone for dust.

Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported ove ...

- technically efficient, ready to work - after full service - profile supports - lowered thrust unit

Specifications H&G HG/SV 11, Presto SP screw compactor 15 pieces available, made between 2004-2014 Weight: 1 800 kg Year of construction: 2004-2014 Tank volume: 25 m3 Power supply: 400V/50Hz 11 kW New containers available for the presented screw press

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph

Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph