pp granulat used for sale

For sale is a pilot plant or small production plant for the production of composites (granulars) from fibrous materials, plant fibers or waste paper with clay flours. Description: A complete technological line consisting of the following machine components: 1. Two tall silos for storage 1,000.00 € 2. Twin shaft mixer 500,00 € 3. Shredder with upstream magnetic drum for the selection of magnetic metals – 20.000,00 € 4. Collagen press type Kahl 18.000,00 € 5. 2 conveyor belts for transfer to the mixing drum € 1,000.00 6. Kitzmann Mixing Drum 25.000,00 € 7. Conveyor belt – €500.00 8. Floor dryer including heating system € 12,000.00 9. Product discontinuation with cyclones 2,500.00 € 10. Electrical distribution and control cabinets 5.000,00 € Original new price of the entire system 465,000.00 € Recommended retail price Total price net 85.500,00 €  ...

Diebels Recycling Machines -Cable pelletizer EUREKA 15 LINE Granulator: 11 KW Pelletizing system connected load: 22 KW -Conveyor system with magnetic head roller Drive: 0.37/400 V -Pre-shredder RMR 170/400 Drive: 12 KW with 0.75 KW Hydraulic Gate Valve Pelletizing system Eureka 15 used system overhauled from year: 2006 Conveyor system with magnetic head roller New machine Pre-shredder RMR 170/400 new machine Electrically configured with power control Capacity with pre-shredder up to approx. 280 kg/h

Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Funnel diameter 41 cm, Auction-ID: A1-43992-90

funnel diameter 41 cm Auction-ID: A1-43992-101

Equipped with mobile base Auction-ID: A1-43992-95

funnel diameter 41 cm Auction-ID: A1-43992-99

Equipped with mobile base Auction-ID: A1-43992-93

funnel diameter 41 cm Auction-ID: A1-43992-100

Equipped with mobile base Auction-ID: A1-43992-98

Equipped with mobile base Auction-ID: A1-43992-96

RAPID 4535 Granulator 3 fly 2 dead blades 2 x Screens 1 x Frame Safety system Spare set of blades

Manufacturer : Alexanderwerk Model : WP150x120V Condition : Used The Alexanderwerk WP150x120V is a roller compactor used primarily for dry compaction and granulation processes, often in industries like pharmaceuticals and chemicals. Find more here - / Contact us at -

Funnel diameter 41 cm, with color Auction-ID: A1-43992-89

Auction-ID: A1-43992-88

Equipped with mobile base Auction-ID: A1-43992-97

Auction-ID: A1-45188-141

Auction-ID: A3-43515-18292

Manufacturer: BHS Model: RBG06 Year of Manufacture: 2016 Type of Machine: Biomass Granulator 45 kW Find more here - / Contact us at -

length:1000 mm width:800 mm weight of the machine ca.:0,7 t dimensions of the machine ca.:1,0 x 0,8 x 1,4 m Hardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.

length:1600 mm width:1000 mm plate height:200 mm weight of the machine ca.:1 t dimensions of the machine ca.:1,6 x 1,0 x 1,3 m Hardstone measuring plate with support desk and 2 tailstocks

Colour and mixing unit with screw Ø 16. Can also be installed on medium-sized injection moulding machines, bottle blowing machines and extruders. Everything works perfectly. You are welcome to visit and try it out. There are 2 pieces available.

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

Conveyor - Wittmann Feedmax S3-NET / New, unused (3 pcs.) Baujhar: 2023 Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

2006, machines are put away working and have had annual inspections

Granulate supply Make: ADOLPH Type: G-Trans 25 for continuous granulate supply on edge banding machines technical details: System for a machine line with 4 pre-melters (standard) Pos.1.1 1 basic unit for bag-emptying G-Trans® 25 Portal for Big-Bags with hanging emptying: Solid steel frame in 40 mm square-tube profile, torsion-stiff welded construction, main pillars with base plate for dowel-anchorage. Solid steel welded construction in square-tube profile, with fork-lift lugs, 4 hooks and tapered guide pins for easy touchdown on the portal. Sufficient stability for 1.500 kg weight. Supporting area with bars and stacking corners. Material container in powder-coated steel, with cone for free-flowing bulk materials. Filler plug diam. 300 mm. Filler opening 350 x 350 mm with sliding cover. 5/8 plugs for granules transport NW 25 Stack frame  ...

granulatore completo di soffiante e coclea di alimentazione

Lunghezza rotore 800 mm Potenza motore 55 kW Nastro di carico con metal detector Soffiante di estrazione

Rotore pieno Lame rotanti 3 Lame fisse 2 Potenza motore 45 kW Cabina di insonorizzazione esclusa Nastro di carico con metal detector Ventola di estrazione

GRANULATORE ROTORE SCAVATO - diamtero rotore 530 - lunghezza rotore 800 - potenza motore 110 kW - lame rotanti 3 - controlame 2 - cabina di isolamento - nastrotrasportatore con metaldetector

Spessore di lavorazione: 3; 5; 8; 10 mm

A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible.

Lame e controlame nuove con aspirazione HS-40/SL-SP

GRANULATORE A ROTORE SCAVATO Lame rotanti 3 Lame fisse 2 Diamtero rotore 550 Potenza motore 75 kw Nastro di carico Soffiante per estrazione materiale

Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available.

granulatore completo di soffiante e coclea di alimentazione

Two low-speed Zerma beside-the-press grinders are available. 1) Zerma GSL-180/430, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 430mm, rotor speed: 150rpm, drive power: 4kW, number of rotor knives: 45, number of stator knives: 2, min. sieve hole diameter: 5mm, weight: approx. 250kg. 2) Zerma GSL-180/300, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 300mm, rotor speed: 150rpm, drive power: 4kW, number of rotor blades: 30, number of stator blades: 2, min. screen hole diameter: 5mm, weight: approx. 250kg. Documentation available. On-site inspection is possible. Individual sale possible.

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

Estrazione materiale: contenitore con foro per aspirazione

Granulatore completo di mulino, aspiratore e struttura riempi big bag. - Lunghezza lame 800 mm

GRANULATORE CON DOPPIA BOCCA DI ALIMENTAZIONE (SUPERIORE E LATERALE), LAME ROTANTE E CINGHIE NUOVE.