pp extruder used for sale

Used Tetra Pak TBA19 125 slim 7500 PPH - Year 2009Technical Specifications & Performance DataTetra Pak TBA/19 TBA 12SS (RCI) filling machine configured for aseptic carton filling and integrated straw application. Built in 2009 and reconditioned in 2017, this equipment is designed for high-output industrial packaging operations where accurate filling and reliable downstream pack presentation are required.Manufacturer: Tetra PakModel: TBA/19 TBA 12SS (RCI) 030V Production speed: 7,500 packs/hFunctions: Filling and straw applicationManufacturing year: 2009Reconditioned: 2017Documentation: Manuals availableAdvanced Automation & Control SystemsThis filling and straw application machine is intended for automated carton packaging workflows. The integrated process combines carton filling with straw application, supporting continuous product handling and coordinated operation within an industrial ...

Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical confi ...

2x Used Eratron PPS PPS 8210MF / PPS 8205 MF plasma power supply units, including pallet (~354kg) Model: PPS 8210MF / PPS 8205 MF Voltage: 380VAC, 3 phase (50Hz) Auction-ID: A1-50936-198

Black plastic, Nominal size 25 mm, Length 20 meters per roll. Auction-ID: A1-41281-226

Black plastic, Nominal size 25 mm, Length 20 meters per roll. Auction-ID: A1-41281-227

Including helmets, gloves, clothing, boots, including heater and blower Auction-ID: A1-50889-60

Black plastic, Nominal size 25 mm, Length 20 meters per roll. Auction-ID: A1-41281-228

Cutting diameter 320 mm Saw blade length 4570 x 27 x 0.9 mm Table height mm Cutting width 450 x 280 mm Drive power 4.0 kW Cutting speed 15 - 105 m/min Motor 380 V Total power requirement 4.0 kW Machine weight approx. 0.8 t Space requirement approx. 1.8 x 0.8 x 1.2 m Condition: functional Auction-ID: A7-51438-551

PPC50G – Petrol Plate Compactor Model: PPC50G Machine Type: Vibratory Plate Compactor Condition: Very Good Visual Condition Auction-ID: A1-51153-93

2500Watt continuous, 5000Watt surge Auction-ID: A1-50903-26

PPC50G – Petrol Plate Compactor Model: PPC50G Machine Type: Vibratory Plate Compactor Condition: Very Good Visual Condition Auction-ID: A1-51509-93

Used PPUH Rctronik craft brewery production line - Year 2015Technical Specifications & Performance DataThis used Brewery line is a complete craft beer production and glass bottle packaging installation designed for brewing, fermentation, product preparation, cleaning operations. Main equipment dates from 2015, with selected auxiliary equipment manufactured in 2017, 2019 and 2002. The stated estimated production capacity is 300 litres per day.Production capacity: 300 litres per dayPrimary container: glass bottlesFilling machine: PUH Witold Nitras XRB-16 glass bottle filler with 12 headsLabeling system: self-adhesive labeling line with conveyor, rotary tables, bottle divider and Hot Stamp printerPasteurisation: flash pasteuriser rated at 1,000 l/h, plus immersion bath pasteuriserFermentation: 10 Uni-Tank UT-20i tanks, each with 2,200 dm³ nominal capacityAdvanced Automation & Control Syste ...

1 set of tools Auction-ID: A1-51499-6

axis Y-X, 1set of tools, Technical documentation Auction-ID: A1-51499-10

Tank for storing and brewing powder Equipped: - Slow mixer at the bottom of the tank with 3 propellers - 1481 RPM engine - 22 RPM gearbox - Lockable, leak-proof tank lid for powder Mounted on a stainless steel frame 380V Auction-ID: A1-51318-275

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Troester 150mm dia PIN extruder Type: QSM150K, Serial no. 8622/80, Year of manufacture: 1980, but refurbished by Troester 2000 (new screw and barrel section) Power roller feed, L/D ratio 16:1 8 rows of 8 pins, fitted with ASEA 212kW DC variable speed motor and controls (1800rpm). Complete with controls etc and in very good condition.

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

Used EXTRUDER twin screw (TWIN SCREW EXTRUDER) for the production of cereal flakes: Producer: PAVAN Model: TT92 Year: 2002 Dimensions: 6580 x 4150 x 3000 Weight: 2400 kg Productivity: 500 kg / h Power: Description: A twin-screw extrusion device as a result of a continuous and automatic process of a great variety of flour and cereal starches / tubers, both mixed and pure. The materials from the dispensing unit are pre-mixed using a suitable device equipped with counter-rotating blades (double shaft mixer), and then enter the mixing tank for kneading and homogenization. From the mixing tank, through a suitable screw device (forced supply), the mixture is pressed into a group of cooking cylinders in which the cylinders are heated to the desired stage, according to a predefined and automatically controlled temperature profile. compatibility of extruder screws, which are repla ...

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Multiple extruders

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Key data: 30 , 28 , 110

Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Key data: 30 , 28 , 110

Single-screw extruder with new 7,5kW drive, new gear box, new cylinder and new screw 30 mm - 28 d, nitrated new ceramic heating elements, cooling fan, temperature sensors Control cabinet integrated in the machine frame Machine frame on wheels Stainless steel hopper

According to the description below

Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

Extruder Petersen VAP 65

Nordson / Puffe Extruder Plant Ex20 -1xPS01-1xPE20-1 for melting hot melt adhesives and thermoplastics, feeding as granules. Melting capacity according to the manufacturer's specifications up to 20 litres/h (EX20) Price: 45.000, -- € plus 19% VAT (Gross price incl. VAT 53.550, -- €) EXW Manufacturer: Nordson / W. Puffe Hotmelt-Technology Model No.: Ex20 -1xPS01-1xPE20-1 Year of manufacture: 05/2006 Serial No. 226260231/001 Power: 15 kW, connection 380V three-phase current Emergency stop, traffic light, CE mark Made in Germany Compact system mounted on a stable rolling frame (H= 198 cm, W= 160 cm, D= 110 cm) consisting of Nordson extruder, gear metering pump, Lenze worm drive, control cabinet with Allen-Bradley control, graphical user interface, storage tank, operating manual. Auxiliary: Labotec Minifeed Suction Conveyor MF60 Serial No. 12-103-00669 (Owner's man ...

Industrieöfen- Fertigung und zirlguss Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen schoenheider Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation gienanth Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen ...

Material: PE, PP, PS, ABS / Details: DC motor 220 kW, degassing, dcrunner, screw diameter 70 mm, LD: 32, Throughput: approx. 400 - 600 KG/hr.

EDI Autoflex Extrusion Die width 900 mm.

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...

vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW

screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: für Extruder 90 mm screw length:: -- screw speedl:: -- U/min drive power:: 13,6 kW Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Barwell MR400 Top Load Ram Extruder