power transformer used for sale

Line defrosting transformer, defrosting device, pipe defrosting device -Type: LA125 -Primary: 220 V/13 A -Secondary: 56 V/60-125 A -Dimensions: 430/200/H400 mm -Weight: 40 kg

Drying oven, drying cabinet, electrode re-drying, electrode cabinet -Drying oven: with isolating transformer -electric: heated -Steel lining -Interior dimensions: 100 x 420 mm -Number: 3x ovens available -Price: per piece -Dimensions furnace: 170/190/H570 mm -Dimensions transformer: 330/220/H360 mm -Weight: 14 kg/piece

Transformer, transformer PGH ELEKTROMASCHINENBAU Type 0,25L TGL 29968 Primary: 220 - 440 V, 50 / 60 Hz 0.1 - 0.32 kVA Secondary: 220 V, 0.72 A IP00 used, tested ! Dimensions: 120 x 100 x 185 mm

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: May & Christe, transformer type T 40 E 5113.0920.208 -Power: 1000/4600 VA -Technical data: see photo nameplate -Dimensions: 160/150/H140 mm -Weight: 13.8 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer type CST -Power: 0.5 kVA -Technical data: see photo nameplate -Dimensions: 150/105/H140 mm -Weight: 7.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Ismet, three-phase transformer type DAW -Power: 0.384 kVA -Primary: 220/380V -Secondary: 24V 16A -Dimensions: 150/120/H160 mm -Weight: 6.1 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Indramat, three-phase transformer type DST/S 2.0 -Power: 2,0 kVA -Primary: 440/415/380V -Secondary: 220V - 5.3A -Dimensions: 200/115/H200 mm -Weight: 12 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Ismet, three-phase transformer type DAW -Power: 0.480 kVA -Primary: 220/380V -Secondary: 24V - 5.3A -Dimensions: 180/135/H160 mm -Weight: 10.1 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRK 25KM -Power: 0.63 kVA -Primary: 3x380-400-420V -Secondary: 24V DC -Dimensions: 190/190/H170 mm -Weight: 1.1 kg

7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V

Dear Ladies and Gentlemen, we have transformer stations 250KVA 20KV on 400V built in 1992 See photos If you have any further questions, please call 00491727265324

Control box with control transformer, control transformer, transformer, transformer, prewired BÜRKLE + SCHÖCK type: ES 3452 P: 0,16 / 0.32 kVA Primary: 380 V, 0.49 A Secondary: 220 V, 0.73 A 50 / 60 Hz control box: 250 x 180 x 100 mm used, tested ! Dimensions: 280 x 180 x 150 mm

Transformer Galvanic MUNK Transformers 8V / 2000A Transformer as good as new, works perfectly For zinc or chrome plating immersion bath, etc... Input: 3x400 V / 40 A Output: 8 V / 2000 A Cooling Type : Water Weight : approx. 550 Kg Loading onto trucks

Ignition transformer KROMSCHRÖDER TTZI 5-15/100W 84331381 Primary: 230 V AC, 50 / 60 Hz, 0,45 / 0.35 mA Secondary: 5000 V ( 5 kV )15 / 11 mA IP20 approx. 0.35 m Connection cable used, checked! Dimensions (without cable): 102 x 86 x 72 mm

as good as new transformer, was only in operation for 6 months 3 Phase Transformer TUMETIC, 630 KVA, 20 KV Weight 1.99 t

PLC control, line filter, line filter, Simodrive choke transformer -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Throttle: Type 6SN 1111-0AA00-OBAO -Transformer: Trasfor TNT BN 2K5/E -Price/tax: complete -Dimensions: 525/240/H230 mm -Weight: 33.6 kg

variable transformer, variable transformer, toroidal transformer SCHUNTERMANN + BENNINGHOVEN RN 220/1,25 ( RN220/1,25 ) input: 220 - 240 V AC 50 - 400 Hz output: 0 - 220 ( 240 ) V 1.25 A shaft diameter: Ø 6 mm, length: 10 mm transformer diameter: Ø 102 mm thread: M10 x 0.75, length: 10 mm variable transformer for rotary control of DC motors New ! Dimensions: 116 x 102 x 98 mm

2500 KVA Transformer Year 2009

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Trafomodern, transformer from press brake HACO PPES 30135 -Type: TS 1.2 -Primary: 220/550V -Secondary: 15-220V -Technical data: see photo nameplate -Dimensions: 170/150/H180 mm -Weight: 10.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate -Dimensions: 150/100/H235 mm -Weight: 9.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Control transformer, control transformer, transformer, transformer SIEMENS 4AM4042-4TT10-0FA0 P: 250 / 850 VA ( 0,) 25 / 0.85 kVA ) Primary: 242 / 230 / 218 V 1AC Secondary: 230 V 1AC, 1.09 A 50 / 60 Hz New ! Dimensions: 117 x 98 x 104 mm

Marx Transformatorenbau GmbH & Co. KG Transformer Type: DAY 516 Pri: 3x480V/777A Sec: 3x400V /909A 60Hz 630kVA Two Wöhner LTS-3 630A load disconnectors are installed at the tap, each equipped with three Siemens 400A and 630A NH3-gG.

Ismet Transformer Type: DAWT-G 40.0 SKU: 731288 Pri: 3x400V +/-5% Sec: 3x230V/3x100.5A 50/60Hz 40kVA Enclosed With circuit breaker Möller NZM N1-A100

A transformer in a SwiBox control cabinet is offered here. It is fully wired with terminal blocks and an Allen & Bradley CAT140-CMN-6300 SER C motor circuit breaker. There are three 4x10mm² cables with open ends. One FLEX-JZ in and two AWM 2587 out. The control cabinet has the compartment with transformer, terminal blocks and motor protection at the bottom and a 19" compartment at the top. The cabinet is 120cm high and 100cm deep. Everything is in very good condition. The front door opens a bit hard. PRI: 3 x 400V SEC: 3 x 208V, 3x60A 50/60Hz

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo nameplate -Dimensions: 1000/570/H760 mm -Weight: 388kg

Transformer, transformer BTK, TRANSFORMATORENBAU KARL-MARX-STADT Type DT D063 TGL 200-1764 0,63 kVA Primary: 380 V 3 AC, 50 / 60 Hz 1.25 A Secondary: 220 V 3AC 1.7 A IP00 used, checked! Dimensions: 205 x 88 x 195 mm

Transformer, transformer VEM, SCAFFOLD SPERENBERG Type D063 TGL 200-1764 0,63 kVA Primary: 380 V 3 AC, 50 Hz 1.25 A Secondary: 18 / 20 / 22 V, 3AC 16.6 A IP00 used, checked! Dimensions: 205 x 105 x 195 mm

Transformer, transformer ROBOTRON, EAW Type 0,4L TGL 29968 Primary: 220 - 440 V, 50 / 60 Hz 0.4 / 0.8 kVA Secondary: 220 V, 1.82 A used, tested ! Dimensions: 140 x 100 x 200 mm

Transformer, transformer BTK, TRANSFORMATORENBAU KARL-MARX-STADT Type DT DSpT5,6 TGL 200-1743 15.2 kVA Primary: 380 V 3 AC, 50 / 60 Hz 24.8 A secondary: 220 V 3AC 40 A IP00 used, checked! Dimensions: 360 x 260 x 350 mm

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Approx. Onsite Dimension. (l x w x h): 700 x 450 x 550 mm, weight approx.: 95 kg

SPECIFICATIONS: Three-phase transformer Voltage: 230/380 Volt Amperage: 80 amps Includes metal housing and control cabinet

Available 3 unit of this oil transformer. Thre three units have perfect condition. The relation is 400-20000 V, and the power 1600kVA.

Transformer, transformer ROBOTRON, EAW Type 0,63L TGL 29968 0.63 / 1.5 kVA Primary: 220 - 440 V 1AC, 50 - 60 Hz Secondary: 110 - 127 V, 1AC 4.96 A IP00 used, tested ! Dimensions: 155 x 110 x 220 mm

Description: Mains voltage 3 x 400 V, nominal voltage 3 x 200 V, current: 3 x 29 A, power: 10,000 VA 50 / 60 Hz - IP 20, according to VDE 0552 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 20 kg

Available 2 units of this tranformer center on container with the transformer and his cell. Power:1600KVA Rate: 400-20000V YOM:2009-2007

France transfo mobile transformer, type: NBN HD, serial number: 41 4886-01, year of construction: 2007, 400 V, 230.9 A, weight: 800 kg, 160 kVA, dimensions: 800 mm x 1100 mm x 1380 mm.

Kestelyn n.v. mobile transformer, type: TNOSCTSE-CC, serial number: 1LPL367921, year of construction: 2006, 3 Ph, 50 Hz, weight: 740 kg, 160 kVA, dimensions: 720 mm x 940 mm x 1560 mm.

France transfo mobile transformer, type: NBN HD, serial number: 695430-01, year of construction: 2004, 400 V, 230.9 A, weight: 880 kg, 160 kVA, dimensions: 1200 mm x 800 mm x 1560 mm.

France transfo mobile transformer, type: NBN HD, serial number: 409976-01, year of construction: 2006, 400 V, 225.3 A, weight: 915 kg, 160 kVA, dimensions: 800 mm x 1100 mm x 1380 mm.

Kestelyn n.v. mobile transformer, type: BO-AK, serial number: 1LBL520996, year of construction: 2013, 3 Ph, 50 Hz, weight: 801 kg, 160 kVA, dimensions: 760 mm x 1000 mm x 1520 mm.

Kestelyn n.v. mobile transformer, type: DBECC, serial number: 2006108179, year of construction: 2006, 3 Ph, 50 Hz, weight: 1020 kg, 160 kVA, dimensions: 760 mm x 960 mm x 1580 mm.

Approx. Onsite Dimension. (l x w x h): 700 x 460 x 600 mm, weight approx.: 120 kg

Description: • Lot of 4 transformers for wide belt sander • It includes: • 2 x BLOCK B9602175 transformers: primary 380-420 V, secondary 24 V • 2 x JACKE transformers: primary 400 V, secondary 230 V Approx. Onsite Dimension. (l x w x h): 800 x 600 x 450 mm, weight approx.: 100 kg

Power Supply, Electronic Module, Power Supply, Transformer ELME EG1-A34 Input: 200 - 575 V 1AC 50 - 60 Hz Output: 24 V DC, 6.0 A used, tested ! Dimensions: 105 x 100 x 145 mm

Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

12 cylinder diesel engine SACM-AGO, Jeumont cutter generator AC630 L4, 2,500 KVA, water-cooled, incl. control cabinets, incl. 4 large fans, incl. additional parts 1 unit complete and 1 piece (not complete) additionally as spare part carrier Year of construction is estimated

1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW