power transformer used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.

Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used 5x axis 5k hours was used for Aluminum and stainless steel 48 place tool changer 8 meter travel table Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price!  ...

Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004

Manufacturer: Siemens, Type: SITOP power 20, Serial number: 6EP1 436-2BA00, Power Input: 50/60Hz, Power Output: 22,8-26,4V,

For sale are 4 pieces of fully overhauled turbochargers from the manufacturer ABB. These turbochargers have an operating time of 0 hours since their complete overhaul and are therefore in mint condition. 1 piece turbocharger Z140, Ref. P/N: 634433 1 piece Turbocharger Power2 340-H44 HP, Ref. P/N: 1205685 1 piece turbocharger Z140, Ref. P/N: 634434 1 unit Turbocharger Power2 340-H44 HP, Ref. P/N: 1205686 The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any questions or for more information. We look forward to your inquiry. Connection dimensions suitable for the following motors: - Jenbacher J624

We sell 170 x Dell PowerEdge T340 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacturers ...

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.

; Gross weight [kg]: 690

TIG-TIG Welding Machine Cebora Power TIG 1640 DC HF DC TIG/MMA welding power source. Inverter Welding Machine (MMA) with HF and Lift Arc Ignition 2-step/4-step selection button. Welding current range TIG (DC): 5 A – 160 A Welding current range MMA: 10 A – 140 A Gas inflow time (post-gas) can be controlled. Current reduction (slope-down) can be adjusted. Connection for remote controller / foot pedal or up/down burner. Mains voltage: 230 V Areas of application & details: TIG Welding Machine Cebora Power TIG 1640 DC HF, Constant DC Source with INVERTER Technology, TIG/TIG Welding Machine, TIG Welding Machine, TIG DC Inverter, Shielded Gas Welding Machine, DC-TIG/MMA Welding Power Source, Electrode Manual Welding (MMA), Arc Welding Machine.

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

Fine shredder Doppstadt AK 565 EcoPower used Model: AK 565 EcoPower Year of manufacture: 05 / 2021 Build No.: 1550 Operating hours: approx. 2,700 hours Availability: by arrangement Equipment: - Mobile shredder, mounted on a central axle trailer chassis for 80 km/h according to StvZo with ABS - Total weight approx. 19,000 kg - Mercedes/MTU diesel engine 6R1300, 390 KW at 2,000 rpm, meets EUROMOT IV emission standard - Fuel system 600 liters - Load-dependent control of the material feed via scraper floor - Aggressive feed roller: length 1,690 mm, diameter 510 mm, with attached toothed elements - Four-row flail drum with 36 free-swinging cast steel flail holders and interchangeable DoppLock flail tips - Centrally located lubrication strips - Electric pump for operating the cylinder functions (raise/lower support leg, open/close rear basket, fold/unfold rear belt, ...

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine.

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Twin-tower automated sheet metal warehouse by PrimaPower - specyfikation: - Combo 1530/2 H6.3, twin-tower warehouse, height 5,970 mm - Year of manufacture 2014 - Control panel - IOW station on the Y axis with rear bumpers for material positioning on block no. 2 - Barrier system and service door for the IOW station - Double wagon on the Y axis for connecting the LD machine to the SG on block no. 1 - 38 cassettes with a load capacity of 3 tons each, sheet stack height up to 100 mm - Maximum stored material dimensions 3000 x 1500 mm. Sheet stack up to 100 mm - The warehouse is loaded with full pallets (without a wooden support) using a forklift and a forklift, or with single sheets - Two trolleys on the outfeed side deliver material to connected devices. The trolley with a further outfeed runs ...

; Gross weight [kg]: 2250