power transformer used for sale

power converter, power supply, power pack, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply DIN rail type WDR-120-24 -Input: 200-500 V AC 50/60 Hz 1.4 A -Output: 24 V 5A -Dimensions: 130/40/H125 mm -Weight: 0.6 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Contactor BALKANCAR, EDZ KB-2 BDS 6012-74 660 V 50 Hz 32 A Control voltage: 42 V 50 Hz IP00 BALKANCAR spare part ! used, tested !' Dimensions: 170 x 80 x 70 mm

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Power Module SCHULZ SYSTEMTECHNIK SBU16 220 to 240 V suitable components: EL407, S482, EL873, EL874, EL875, EL876, EL877 used ! Dimensions: 480 x 460 x 180 mm

Power supply SCHULZ SYSTEMTECHNIK LED48-IF 24 V (DC) 0.8 A suitable components: EL407, S482, EL873, EL872, EL874, EL876, EL877 used ! Dimensions: 140 x 200 x 40 mm

Power supply module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC -Type: A06B-6150-H075 -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Contactor TELEMECANIQUE LC1D09BD 035307 4 kW 400 V Control voltage: 24 V DC New ! Dimensions: 115 x 95 x 50 mm

Contactor TELEMECANIQUE LC1D12BD 035371 5.5 kW 400 V Control voltage: 24 V DC New ! Dimensions: 115 x 95 x 50 mm

power converter, power supply, power supply, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, Wilo DIN rail power supply -wilo: Type CR-NT 12V DC -Input: 100-240 V AC 50/60 Hz 1.8 A -Output: 12 V 1.67 A -Dimensions: 100/25/H90 mm -Weight: 0.1 kg

Power Supply PHOENIX CONTACT CM125-PS-120-230AC/24DC/5/F 2939522 Input AC: 100 - 240 V AC 47 - 63 Hz Input DC: 110 - 370 V DC Output: 24 V DC 5 A New ! Dimensions: 135 x 125 x 140 mm

Contactor SIEMENS 3TF44 3TF44 220BB4 ( 3TF44220BB4 ) 15 kW 400 V Us: 24 V DC New ! Dimensions: 105 x 85 x 150 mm

power converter, power supply, power pack, switching power supply -Manufacturer:Siemens, SITOP Power 20 -Type: 6EP1436-1SL11 -Input: 3AC 230/400 V 50/60 Hz -Output: 24 V DC / 20 A -Quantity: 1 piece available -Dimensions: 240/120/H130 mm -Weight: 3.3 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Passage: Ø 34 mm -Hole: Short cone 6 cone Ø 103-106 mm -Thread: M40 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 195 mm -Weight: 23.7 kg

Power converter, control unit VEM Thyresch DT0 DT0 AB0024-DGG 400/160 ( DT0AB0024-DGG400/160 ) Input: 380 V AC 132 A Output: 400 V DC 160 A used, tested !, tested Dimensions: 340 x 290 x 310 mm

power converter, power supply, power pack, switching power supply, power supply, DIN rail power supply -Manufacturer: Siemens, SITOP PSU8200 power supply DIN rail power supply -Type: 6EP1437-3BA10 -Input: 3 AC 400-500V / 2.6-2.1.6A / 50/60 Hz -Output: DC/24 V / 40A -Dimensions: 150/150/H130 mm -Weight: 3.4 kg

Power supply, power converter, power supply unit, switching power supply, DIN rail power supply -Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 Ord.No.: 2903151 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: HSAJET, Power Supply for Inkjet Printers -Type: Minitouch MTHP4 MTHP4PSU V2.0 402C0B -Input: 100-240 V -Dimensions: 200/120/H95 mm -Weight: 1.5 kg

Power supply WMW, ROBOTRON STM 2 x STM 12 V / 4.2 A / 10 2 x STM 24 V / 2 A / 01 1 x STM 12 V / 1.5 A / 02 1 x STM 5 V / 3.3 A / 02 1 x NFI used ! Dimensions: 520 x 230 x 160 mm

Hydraulic power unit with tank LINCON KV 18-102-141/0.12 ( KV18-102-141/0.12 ) 8 bar 1 l/min motor: 0.12 kW 220 / 380 V used, tested ! Dimensions: 380 x 300 x 400 mm

Power converter, power supply, power supply unit, switching power supply, DIN rail power supply, buffer module Manufacturer: Siemens, SITOP PSE201U -Type: 6EP1961-3BA01 -Input: DC 24-28.8V -Output: DC/24 V -Number: 2 modules available Price: per piece -Dimensions: 130/70/H130 mm -Weight: 1.3 kg/pc.

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 32A / 16A -Transport dimensions: 255/145/H165 mm -Weight: 2.6 kg

pneumatic power clamp TÜNKERS V63.1 Z A00 T12 45°-105° 105° BR2 ( V63.1ZA00T1245°-105°105°BR2 ) Adjustment range: 45° - 105° Max 24 V Max 6 bar with sensor New !' Dimensions: 400 x 160 x 80 mm

Multi-power cylinder, pneumatic cylinder TÜNKERS stroke: 150 mm rod diameter: Ø 80 mm New ! Dimensions: 800 x 270 x 250 mm

Power strips, portable power strips, solid rubber power strips, adapters, construction site power distribution boxes, CEE adapters -Manufacturer: Bals, CEE adapter 63A / 32A -Transport dimensions: 255/145/H165 mm -Weight: 3.3 kg

Emergency power supply, power converter, power supply unit, switching power supply, office emergency power supply -Manufacturer: LADS, Office emergency power supply -Type: H2000 -Voltage: 220 V 50/60 Hz -Power: 2000VA/1200W -Quantity: 1 piece available -Price: per piece -Dimensions: 220/130/H60 mm -Weight: 11 kg

Power supply, sliding contact STROMAG with 2 spare contacts diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm length: 10 mm Dimensions: 95 x 22 x 22 mm

Power supply, sliding contact STROMAG (Paul Langer, Dresden) carbon brushes diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm length: 15 mm Dimensions: 75 x 22 x 22 mm

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Power converter, power supply, power supply unit, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply -Type S-100F-24 -Output: 24 V 4.5 A -Dimensions: 200/10/H40 mm -Weight: 0.7 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Power supply, sliding contact STROMAG diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm Length: 10 mm Dimensions: 75 x 22 x 22 mm

Key data: 504 KW, 630 kVA, 400 V

We offer for sale an MTU 12V2000 diesel emergency power generator: Specifications: Engine: MTU Type: 12V2000 Power: 504 kW Speed: 1500 rpm Voltage: 400 V Cos phi: 0.8 Frequency: 50 Hz Year of Make: 2005 Operating hours: 800 h Condition: Good Dimensions: BXHXL = 2450X3,000X12,000 mm Weight: 18,000 kg

2007 Mercedes Combined heat and power plant (CHP) The CHP plant was originally intended for an oil platform. Therefore, it is protected against salt water and can also be operated in island mode. Technical data (See pictures) CHP plant with Mercedes engine, which is designed for multi-quality fuel (diesel, heating oil, pyrolysis oil or vegetable oil). Thus preheating unit and corresponding exhaust gas purification. BJ. 2007. Operating hours: 0 (test run only); The unit was never connected to the network. If palm or vegetable oil is used, preheating” is required to get above the pour point. All pumps were completely overhauled by the manufacturer when we purchased them (see Rg with maintenance report). If you want to drive in island mode, this must be changed on the control + the controller on the generator must be replaced. In addition to electricity, the unit can also recover  ...

Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 4 l/min -Drive: 0.75 kW -Hydraulic tank -Hydraulic valve - Additionally: Hand hydraulic pump -Weight: 110 kg

Key data: 206 KW, 500 kVA, 400 V

Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg

liter capacity: . l feed pressure: . bar coolant capacity: . l The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm Control: SIEMENS SINUMERIC 840D table-size: 2.900x700 mm table weight: 2.150 Kg tool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mm workpiece weight: 6 kg workpiece dia.: 80/130 mm : 30 fach main drive: 18,4/14 kW speed: 14.000 mm/min rapid traverse: 40 m/min feed: 40 m/min Machine on: 18.859 h Spindle hours: 5.666 h internal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kW weight of the machine ca.: 14.520 kg dimensions of the machine ca.: 10.280 x 7.230 x 3.042 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power converter, current inverter, current transformer, drive inverter, controller -Perfomance: -Input: 380/415 V -Output: 460 V DC Serial No.: 05603 Price: per piece -Weight: 7.5 kg

laboratory power supply -0-1 A -0-20 V -Weight: 5 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

x-travel: 4.000 mm y-travel: 2.100 mm z-travel: 1.000 mm taper ISO: ISO 50 Number of revolutions: 5.000 rpm table-size: 4.020x2.010 mm table weight: 12.000 Kg Control: Heidenhein iTNC530 Tools place: 32 fach rapid taverse: 15.000 mm/min total power requirement: kW weight of the machine ca.: 39 t dimensions of the machine ca.: 10680x5600x5100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

power supply Type: RPS -Weight: 13 kg

Key data: 200 KW, 225 kVA, 400 V

1 emergency generator with Deutz diesel engine and Siemens generator, Power 225 kVA = 200 kW, 400V/3PH/50Hz, Start with 20 bar compressed air, complete with 2 pressure vessels and matching compressor, approx. 1,000 operating hours, still completely operational

description: Here we offer a whole range with different Siemens SITOP power supplies. It is possible to buy the entire range, but also parts of this range can be purchased. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offe used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements wihtout guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services an ...

Power amplifier, ET00-104-10, Parker, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - Mounted in a Murr 63001 plug-in card carrier 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies wi ...