power screen used for sale

Key data: 4 Meter, 13 t

Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:

KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...

General SKU409X1294 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor115-230 volt CapacityWavelength: 365,385,395,405 and 460 nm With jacketcheck General MakeHonle TypeLed cube 100 IC Floor space1,0x0,40 m Total height0,50 m Weight22 Extra Specifications3x led cube 100 IC with led spot hp, UV chamber size 195x186x195 mm,&:nbsp:Temp range +5°C till +35°C,1x led powerdrive IC 1200 wattOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBevera ...

Engine Brand: IHC/CASE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/ihc-case-p110-power-unit-u sed/613, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DJA-P110; Transport weight [kg]: 710

General SKU409X1295 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor115-230 volt CapacityWavelength: 365,385,395,405 and 460 nm With jacketcheck General MakeHonle TypeLed cube 100 IC Floor space1,0x0,40 m Total height0,50 m Weight22 kg Extra Specifications3x led cube 100 IC with led spot hp, UV chamber size 195x186x195 mm,&:nbsp:Temp range +5°C till +35°C,1x led powerdrive IC 1200 wattOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBev ...

General SKU409X1296 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor100-240 volt CapacityWavelength: 365,385,395,405 and 460 nm With jacketcheck General MakeHonle TypeLed cube 100 Floor space1,00x0,40 m Total height0,45 m Weight25 kg Extra SpecificationsWith 3x UV chambers, type led cube 100 with led spot, chamber size 195x186x195 mm,&:nbsp:1x powerdrive, type 120Oils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBio ...

We sell 9 new gas engines, zero engine hours. Power as follows described Sale due to going out of business. 2 engines 38 kW - WJPower HMG 320 - SAE 3 2 engines 56 kW – WJPower HMG 434 - SAE 3 3 engines 85 kW – WJPower HMG 634 - SAE 2 2 engines 100 kW – WJPower HMG 645 - SAE 2

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 31631 worktime hours, of which 10574 are laser emission hours. The machine has a laser power of 3 kW.

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.

This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information.

This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.

This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information.

This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.

This Prima Power PLATINO FIBER was manufactured in 2015. A robust laser cutting machine featuring a 3000x1500mm cutting area and a powerful 2kw FIBER technology. It includes 2 exchangeable tables and boasts a high reposition speed of 140m/min. With 29,000 machine hours and 25,600 cutting hours, the Prima Power PLATINO FIBER machine we have for sale is regularly maintained. Contact us for more information.

Series B, 132kW, 232A. S/N 12082007

This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.

Series A, 22C-D038A103, 18,5kW, 40A

The machine is in good technical condition, testing possible after prior agreement. Force (kN) 250 Bending length (mm) 1200 Distance between verticals (mm) 1250 Stroke (mm) 200 Entry without tools (mm) 440 Throat (mm) 120 Consumption (kVA) 9.4 Approach speed (mm/s) 120 Working speed (mm/s) 10 Return speed (mm/s) 150 Stroke - X axis of the back gauge (mm) 625 Speed - X axis of the back gauge (mm/s) 600 Stroke - R axis of the back gauge (mm) 200 Speed - R axis of the back gauge (mm/s) 200 Standard dimensions (L x W x H) (mm) 2200 x 1600 x 2320 Weight (kg) 3450

This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details.

Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.

Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg

Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

·, - Weight: approx. 35.0 t, · Setup time: about 0.5 h, · Max. task piece size: about 800 mm, · Inlet opening: 1,200 × 700 mm, Throughput: dependent on the material, · Year of construction: 2012, · Operating hours: approx. 8,000 h

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine