133,839 used machines on RESALE, but how to find them? Machine Search
clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Yanmar diesel engine No leakage Auction-ID: A3-43553-20
Hydraulikpresse / Hydraulic Press Tränklein ZP Serial-No. 24088 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-47842-518
Vertikale Pressauslage / Vertical Press Delivery MBO FA 82-ME Navigator Year 2010 - Serial-No. 104197100101 Arbeitsbreite / Working width max. 820mm mit integrierten Presswalzen / with intergrated press rollers mit Markiereinrichtung / with Marking Device ME Navigator Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm C-Type 1 Station
pressure:2 t dayligth:80 mm Center of spindle to wall or column:100 mm weight of the machine ca.:0,5 t dimensions of the machine ca.:0,8 x 0,6 x 2,0 m Hand operated fly press, with center turning device appr. 100 x 400 mm length - Handwheel diameter 600 mm
Kniehebelprägepresse - Embossing Stamping Press Krause KHP Prägefläche / Stamping size: 350 x 400 mm Sehr guter Zustand / Beautiful condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 60 t stroke: 400 mm table surface area: 800 x 500 mm feed down: 4,03 mm/sec feed up: 5,82 mm/sec column daylight: 820 mm oil pressure max. in the work cylinder: 400 bar oil volume: 26 l voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
pressure:10 t distance between columns:450 mm :1500 mm table-size:450 x 400 mm weight of the machine ca.:470 kg dimensions of the machine ca.:1400 x 750 x 1600 mm
Letter Press Tiegel DIE Cutter Heidelberg GTS Serial-No. 52 931 N Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden
Andruckpresse / Proof Press Asbern ADR.1 Baujahr / Year 1963 - SN. 7014 Format / Size max. 400 x 550mm Aufzugsstärke / Lift strength 1,2mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
Schließrahmen - Frame OHT Letter Press Heidelberg OHT A4 -24 Frame OHT Tiegel -8 Frame KS Cylinder -1 Frame KSB Cylinder -2 Frame S Cylinder -4 Frame SBG Cylinder -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:20 t Stroke:230 mm table surface area:Ø600 mm distance table - lower edge of ram:770 mm weight:595 kg
weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm
Pressstation für Falzmaschinen - Pressstation for Folding machine Stahl PS66 Year 1985 - Serial-No. 27410/85 Working width max. 660mm Pressure 60.000N Speedca. min. 50 m/min - max. 100 m/min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
nominal force:100 t stroke:320 mm no. of strokes:35 /min distance between columns:360 / 250 mm Distance table/ram, max. stroke up, adjustment up:500 mm table surface area:320 x 450 mm table height over floor:660 mm ram surface:250 x 280 mm spindle diameter:125 mm power capacity:3,0 kW weight:4,5 t Dimensions (WxDxH):2,0 x 1,6 x 3,1 m
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (11) Baujahr / Year 1998 - SN. 1901355 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
nominal force:160 t stroke:140 mm no. of strokes:85 /min distance between columns:400 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:400 x 450 mm table height over floor:800 mm Allowed max. force:230 t ram surface:400 x 320 mm spindle diameter:125 mm power requirement:7,35 kW weight:5,0 t dimensions (WxDxH):1,7 x 1,2 x 2,9 m
pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker VCL 60 DV Serial-No. 28503 Frequency 50 Hz Speed 1400 min power required 3 PS inlet capacity 60 m3/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
no. of strokes:150 /min impact energy:420 kJ distance lower die block / ram gudeway:435 mm Throat:425 mm steel forging - rectangular up to:110 mm steel forging - diameter up to:125 mm power requirement:22,0 kW weight of hammer:3,9 t weight of anvil:3,0 t ram hammer weight:200 kg weight:6,9 t dimensions (WxDxH):1,1 x 2,3 x 2,4 m
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (11) Baujahr / Year 1997 - SN. 1822845 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1460773 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464418 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40 Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
maximum number of results exceeded
please refine your search
250 € 
