134,878 used machines on RESALE, but how to find them? Machine Search
Pressure transmitter for measuring gases, vapors and liquids ROSEMOUNT 2088
USED PRESSURE TRANSMITTER WITH SPACER RING VEGABAR 81
Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener
New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...
- 2 pressure tanks with 61.1 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,500 mm, H: 4,200 mm. - 4 pressure tanks with 102.2 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,800 mm, H: 4,900 mm.
New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...
- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.
SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins
Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 high-pressure gun with quick coupling and swivel joint in the input - Double jet tube with nozzle 065 and low pressure nozzle Optional (additional cost): - Hose reel - 30 m high pressure hose The images contain additional options. Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emerge ...
New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...
New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...
New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A. The offered machine, apart from passing the start-up tests, has not worked in production and is like new. The ADIRA BB3515 CNC press brake is the perfect choice for precision machining of workpieces with a maximum length of 1500 mm. The machine is distinguished by the use of many state-of-the-art technical solutions, thanks to which it will meet all, even the most intensive challenges of modern business. The powerful electric drive developed in Bluedrive technology, is free of any filters, seals and hydraulic oil compared to a standard hydraulic system. This solution makes the machine much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its ...
Nilsfisk ALTO NEPTUNE 8, Price: 3.500 € netto, year of construction 2008. Hot water high-pressure cleaner for the most demanding cleaning tasks. The device combines powerful pressure with high water output, which is needed for cleaning heavy soils in agriculture, construction, transport or industry. In addition to the convincing cleaning effect, the high alluvial performance is particularly effective. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.
New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg
Baler Presto CC 50 M, semi-automatic, year of construction 2015, press force 50 t, with lift-tilt device Specifications: Manufacturer: Presto Type: CC 50 M Year of Make: 2015 Hours: 1932 Press force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput at bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, foil The user manual is available in German. Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or YouTube channel. Viewings, also under power, are possible at any time by arrangement. On ...
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2016 Hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cardboard Note: The press is in very good condition. The hydraulic hoses were to be replaced. The operating instructions are available. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by pho ...
Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses
Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...
Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW
Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...
Press line with ACP 1500 and APEX 1600, capacity: approx. 14 to/h Continuously operating with integrated post-extraction of the pomace to increase the yield Compac press type: ACP 1500, belt width 1,500mm, length of the press approx. 4,515mm, width: 2,440mm and height approx. 2,180mm, Pressing Belt / Sieve Belt Maiche inlet funnels, juice drip trays Pneumatic cylinders for belt tension, pneumatic control, piping Belt cleaning by means of a rotating brush roller and belt scraper blade; Mash Pump Type: AMP 580, Progressive Cavity Pump in Compact Design Pressing line with APEX 1600 To obtain fruit juices to obtain particularly high yields, with an integrated system of post-extraction of the pomace Footprint: 3,500mm x 2,500mm, with:
Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089
Machine name: Chamber filter press Manufacturer: MSE Type: KFP1000-90/60-25 Year of Make: 2011 Design: Side-spar press Filter pressure: 15 bar Press capacity: Approx. 1177 liters (expandable to 1766 liters) Procedure: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate format: 1000 x 1000 mm Number of plates: 60 (expandable to 90) Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Tech. Documentation: Yes Accessories: drip plates, 25 spare plates, control cabinet, hydraulic system, light barrier Condition: Used Price: On request
Cold water high-pressure cleaner Working pressure: infinitely variable up to 350 bar Required quantity:up to 21l/min (1.260l/h) Pump:3-Plunger All-Ceramic Engine:2 Cyilinder, Hatz Diesel,air-throated Motor power:17 kW Speed motor/pump: 2,900/1,450 rpm Pump drive: V-belt Fuel consumption:approx. 4,0l/h Volume fuel tank:20l Pressure outlet (water):M221.5AG Heating capacity Olbrenner Empty Weight:215kg Mass(LWH) 918096 Article no.: 1 492 060 or 1 492 002
Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:
used
Hot and cold water high-pressure cleaners Working pressure:infinitely variable up to 350 bar max requirement quantity:16l/min Pump:3 Plunger,All-ceramic Engine:Kubota 3-cylinder diesel Motor power:13kW Speed motor & pump: 3000/1,090 rpm Pump drive:V-belts Fuel consumption:3,9l/h Volume of carbon tank:70l Volume water tank:300l Pressure outlet (water) M22 1.5IG Heating capacity olburner: max1115kW (approx. 95°C) Consumption Olbrenner: approx. 7l/h Construction:self-supporting frame on frame with forklift pockets Empty weight:about 680kg Mass(LWH) 152122146 Dimensions open (LWH) 183122195 Article no.: 1 480 030
used
Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 220 bar max demand quantity 26l/min Pump:3-Plunger,All-Ceramic Engine: Kubota 3-cyilinder diesel Motor power: 13kW Speed motor and pump: 3,000/1,760 rpm Pump drive: V-belt Fuel consumption: 3,9l/h Volume fuel tank: 70l Pressure outlet: (water): M22 1.5 AG Heating capacity Olbrenner : max 1115kW (ca 95° C) Consumption Olbrenner: approx. 7l/h Construction: Skid - Construction Empty weight: about 420kg Dimensions(LWH) 12080112cm Article no.: 1 546 712
Key data: 3 t, 150 mm
For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts
SPECIFICATIONS: Vertical frame press for windows and doors Hydraulic operation machining length mm: 3,000 machining height mm: 2,000 Installed capacity KW: 1.6 Beam 2 horizontal bars 3 Vertical bars with pusher
Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request
Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
EKOTON PRODEKO-EŁK GK-8.230.20.H filter press was built in 2018 in Poland by PRODEKO-EŁK. The machine is used for the economic dehydration of sludge, based on the principle of filtering solids from the liquid. The slurry pumped in flows through chambers with filter plates, on which the solids are retained. The sludge that accumulates in this way forms a so-called filter cake”, which, after filling the space of the chambers, falls out into a container or onto a conveyor. The use of this solution significantly minimises waste disposal costs in many industrial sectors, such as the metallurgical industry, chemical industry and mining. The GK-8.230.20.H membrane filter press weighs 37000 kg. The offered PRODEKO-EŁK KMF GK-8.230.20.H chamber filter press is fully complete and consists of the following parts: – support structure with platforms – tank for clean water – pressure ...
Stock number: U2391 Used rotary tablet press by Killian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included.
Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.
Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
FETTE TABLET PRESS 2090 Year of manufacturing: 2003 High speed tablet press. Operating area enclosed within four double walled Perspex safety guards. double walled Perspex safety guards • the product to be filled is placed in a stainless steel hopper and guided through a Fill-O-Matic motorised powder feeder into the mould cavities, which can be easily dismantled for cleaning • can be connected to an external dust extraction system via connection ports in the upper part of the housing PRODUCTION • works with interchangeable moulds • can produce capsule shaped tablets • Production: 216,600 tablets/hour (max; with turret installed) • Tablet dimensions: up to 25 mm Ø (max) • Tablet thickness: 8.5 mm (max) Number of stations: 29 • Compression: 100.0 kN (max) • Pre-compression: 100.0kN (max) • Filling depth: 18.0 mm (max; with suitable cam) • Rotation speed: ...
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3700 mm - Width: 1800 mm - Height: 2450 mm - Weight: 7000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type ...
maximum number of results exceeded
please refine your search
